• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.179-187
• /
• 1982

The copolymerization of N-acryloylpyrrolidone and acrylonitrile was performed in N,N'-dimethylformamide at 50$^{\circ}$C and monomer reactivity ratio was obtained by using IR working curve and Fineman and Ross equation. ($r_1$ = 0.43, $r_2$ = 1.56) It is found that resulting copolymer is good polymeric initiator for anionic graft copolymerization of 2-pyrrolidone. Graft copolymers with polybutylamide (nylon-4) grafts onto poly(NAP-Co-AN) backbone were synthesized and the various effects on the graft copolymerization of 2-pyrrolidone were examined. The rate constants ($K_p$) of graft anionic polymerization at 40 and 50$^{\circ}$C were 2.82${\times}$10 and 2.93${\times}$10(l/mole, min), respectively.

• Journal of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.316-320
• /
• 1976

Based on the results of graft copolymerization to proteins, an attempt is made to derive the rate equations to explain the mechanism of Ce(IV) ion-initiated graft copolymerizations. In this system the oxidative termination by Ce(IV) $[R{\cdot}+ Ce(IV) ${\rightarrow}$ R(inert) + Ce(III) + H^+]$ is considered characteristic particularly in higher concentration of Ce(IV) ion. The change in the mode of termination reactions with change in Ce(IV) ion concentration makes possible the presence of an optimum Ce(IV) ion concentration for maximum graft copolymerization yield. This effect is reflected in presently derived equations.

• The International Journal of Costume Culture
• /
• v.6 no.2
• /
• pp.134-146
• /
• 2003

Polyester of linear homopolymer poly(ethylene terephthalate)(PET) was chemically modified through the formation of branched copolymer to improve the undesirable properties of fiber. Photo-induced graft copolymerization of the acrylic monomers acrylic acid (AA) and methyl acrylate (MA) in the liquid and vapor phase, respectively, onto N,N-dimetylformamide (DMF)-pretreated PET fibers was carried out. The effect of various synthesis conditions and DMF pretreatment of the PET on the graft yield was investigated. Grafting mechanism was analysed. The grafting was promoted by increasing DMF pretreatment temperature and amount of DMF retention in the fiber. The increasing biacetyl and monomer flow time, and irradiation time enhanced the grafting up to a certain amount and thereafter it decreased.

• Elastomers and Composites
• /
• v.26 no.2
• /
• pp.109-114
• /
• 1991

The graft copolymerization of chloroprene rubber with methyl methacrylate in toluene solution has been carried out varying the concentration of monomer, initiator, CR, reaction time, and reaction temperature, etc.. It is observed that the grafting reaction follows conventional kinetic behavior under the present experimental conditions. Identification of grafting on to chloroprene rubber was obtained through characterization of the graft copolymer by infrared spectrometer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.347-358
• /
• 1993

Graft copolymerization of MMN4-VP onto cotton fiber using Ce(IV) salt as an initiator and triton X-100 as an emulsifier was performed under various polymerization conditions. In cograft polymerization, the polymeization behavior according to variation of 4-VP feed composition and the characteristics of MMA/4-VP graft polymer such as affinity for acid dye owing to cationization of cotton, antibacterial activity and thermal behavior were investigated. The results of this study were as follows : 1. While in copolymerization of MMA and 4-VP, 4-VP content in copolymer was more than that of monomer feed composition. 2. Increasing 4-VP content, graft yield was decreased, but graft efficiency was increased. In case of MMA/4-VP graft polymerization, the highest graft yield was obtained at higher CAN concentration than in MMA graft polymerization, the reason is that the behavior of 4-VP was disturbed by Ce(IV) sail 3. Elevation of temperature resulted in increase of graft yield and the apparent activation energy of MMA/4-VP graft polymerization was higher than that of MMA graft polymerization. 4. MMA/4-VP grafted cotton fiber showed affinity for acid dye, antibacterial activity and higher moisture regain than MMA grafted cotton fiber. MMA/4-VP grafted cotton fabric showed improvement of wrinkle recovery up to 40~50% graft yield and decreased thereafter. MMA/4-VP and MMA grafted cotton fabric did not showed significant difference in wrinkle recovery and stiffness.

• Elastomers and Composites
• /
• v.28 no.3
• /
• pp.191-197
• /
• 1993

The graft copolymerization of methyl methacrylate(MMA) onto natural rubber latex(NRL) initiated by t-butyl hydroperoxide(t-BHPO) was investigated in aquous medium. The grafting percentage, grafting efficiency and total conversion were observed in various reaction conditions such as monomer, initiator and emulsifier concentration, reaction temperature, reaction time and agitation speed. The optimum conditions for the graft copolymerization onto natural rubber latex were as follows ; At given monomer concentration of $3{\times}10^{-2}mole/l$, the maximum grafting percentage was appeared in the case of grading in initiator concentration of $4{\times}10^{-2}mo1e/l$ and emulsifier concentration of 0.2wt.% at $40^{\circ}C$ for 5hrs.

• Elastomers and Composites
• /
• v.11 no.1
• /
• pp.54-62
• /
• 1976

It has been studied the graft copolymerization of glycidyl-methacrylate monomer containing two functional groups (vinyl- & epoxyl-) to chloroprene rubber. The reaction occured in the manner of chain transfer mechanism was carried out by means of solution polymerization in toluene in the presence of benzoyl peroxide as the radical initiator. The graft copolymer obtained from this work was analyzed by using IR spectrum, and the physical properties of the polymer such as the thermal behavior were also studied according to TG-DTA methods, and the potency of adhesiveness for the purpose of commercial application was investigated. Experimental results for the graft copolymerization are summarized as follows. 1) A small amount of initiator (0.5%) and 50% of monomer showed the best result for the grafting of monomer to the polymer chain of rubber while the 15% of rubber solution was found to be most suitable to raise either for the grafting ratio or the polymerization ratio. 2) Optimum temperature for better yield of graft copolymer was proved to he at $75^{\circ}C\sim80^{\circ}C$ while those of reaction time was to be $1\sim2$ hours.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.3 s.39
• /
• pp.271-280
• /
• 1991

Emulsion graft copolymerization of MMA onto cotton fiber using Ce(IV) salt as an initiator was carried out. Graft yield and graft efficiency were observed according to the kinds and concentrations of emulsifier and polymerization conditions. The physical properties of MMA grafted cotton fabric were investigated. The results of this study were as follows: 1. The heighest graft yield of emulsion graft polymerization occurred at the concentration below cmc of emulsifier, which was different from emulsion polymerization. Nonionic sur- factant as an emulsifier was more effective than anionic one. 2. The highest graft yield was obtained at the initiator concentration $1{\times}10^{-2}mol/l$. The viscometric molecular weight of PMMA was in the order of 106. 3. As reaction time increased, the graft yield increased but the graft efficiency decreased. 4. Elevation of reaction temperature resulted in increase of graft yield. The apparent activation energy of MMA graft polymerization was 4.72 Kcal/mol. 5. Physical properties of MMA grafted cotton fabric varied with increase of grafting. Thickness and stiffness showed a noticeable increase, whereas tensile strength and elongation was slightly increased. Crease recovery increased as the graft yield increase up to $50\%$ and decreased thereafter.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.53-58
• /
• 1996

The Chitin Thiocarbonate-Fe(II)-H2O2 redox initiator system was investigated for the graft copolymerization of acrylonitrile(AN) and acrylic acid(AA) monomers onto chitin powder. The reactions with vinyl monomers onto chitin were carried out under various the graft copolymerization conditions to elucidate the polymerization behavior in terms of graft yield. Reactions of chitin-acrylonitrile graft copolymer with hydroxyl amine hydrochloride and those with sodium hydroxide were conducted in order to obtain chitin-(amidoxime-co-acrylonitrile) and chitin-(acrylate-co-acrylamide) graft copolymers, respectively. The reaction efficiency was observed to depend on the alkali concentration, time, temperature, and the reactant concentrations. The prepared chitin derivatives were evaluated to find potential applications for use in wastewater treatments for adsorption and desorption of heavy metal ions as well as acidic and basic dyes.

• Elastomers and Composites
• /
• v.14 no.1
• /
• pp.7-12
• /
• 1979

Graft copolymerization of methlymethacrylate(MMA) onto sodium alginate(SA) aqueous solution by sodium metaperiodate$(NaIO_4)$ as an initiator was carried out with the variation of the reaction time, the reaction temperature and the concentrations of initiator and monomer. The results obtained were as follows: 1. SA was easily separated from the reaction mixture of homopolymer, graft polymer and sodium alginate ungrafted by the treatment of concentrated boiling $Na_3PO_4$, solution with the small amount of $Na_2SO_3$ to the mixture and then isolated as the acid form by acidifying the salts solution containing SA. 2. The amount of graft polymer was larger than that of homopolymer below $70^{\circ}C$ whereas above $70^{\circ}C$ the amount of homopolymer was larger. 3. The sum of each amount of graft polymer ana homopolymer was always increased with increase of the reaction time, the reaction temperature and the concentrations of initiator and monomer. 4. With increase of the concentration of initiator, the graft efficiency was increased below $70^{\circ}C$ while decreased above $70^{\circ}C$. 5. Graft copolymerization of MMA onto SA in aqueous solution was carried out without initiator.