• Agricultural and Biosystems Engineering
• /
• 제3권1호
• /
• pp.1-9
• /
• 2002

Garlic is one of the major seasoning vegetables in Korea and consumed mostly in a form of peeled cloves. Conventional Korean standards for garlic grading consist of four classes according to the size of bulb and its shape. Sorting and grading of garlic are manually done but could be in the process of automated mechanization using machine vision system in the near future. The proportion of mass of cloves in a garlic bulb to the volume of the bulb (g/ml) was determined to find out the best way of representing both the quantity and quality of cloves in each bulb. Garlic bulb was assumed as an ellipsoid and its major and minor axis and its height were measured to calculate its volume. The mass proportions and density of a garlic bulb and cloves were measured for four domestic varieties of garlic to propose it as a standard for Korean garlic grading machine.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2003년도 추계학술발표대회(하)
• /
• pp.601-604
• /
• 2003

신발 설계 시스템에서 그레이딩 기능은 기본 사이즈로 설계된 신발 라스트를 생산하고자 하는 여러 사이즈로 변환하는 작업이다. 그레이딩(Grading) 작업은 전체적으로 적용되는 제로 그레이딩(Zero Grading)과 특정한 부분에 개별적인 룰을 적용하는 센터 그레이딩(Center Grading)으로 구분된다. 이 두 방식을 혼용하여 그레이딩 작업을 수행하는데, 이 때, 휘어짐이나 일그러짐과 같은 부적절한 결과가 발생할 수 있고, 이런 오류를 보정하기 위해 제약조건들(Restrictions)을 적용한다. 이와 같이 센터 그레이딩과 제약조건들을 적용한 그레이딩을 특수 그레이딩이라 한다. 기존의 신발 설계 시스템에서는 이런 특수 그레이딩에 대해 속도가 느리거나, 기능이 미비하거나 지원하지 않는 문제점이 있다 본 논문에서는 이런 문제점들을 해결하고, 특수 그레이딩을 위한 제약조건을 다중으로 적용할 수 있도록 보완하였다.

• 농촌계획
• /
• 제5권2호
• /
• pp.1-13
• /
• 1999

Packing house is the regional center in which packing, sorting, storage, and selling of harvested fruits are taken care of all together. It is located at the producing centers, and commercializes their apples. Apple grading policies of chief producing centers should concentrate on enhancing functions and roles of its local packing house. Consequently new packing house policies for enacting individual grading standards at national and local levels should be developed. This study is to develop Korea packing house on the basis of field survey in New York State. Increasing the utilization of packing house is the main key to the success of apple grading project. Therefore, effective arrangement and utilization of sorting facilities should be evaluated and new system which enables apple farms, local cooperatives, and corporations to joint-utilize packing house must to be established.

• 대한의용생체공학회:의공학회지
• /
• 제39권6호
• /
• pp.268-277
• /
• 2018

With drastic change in the market and technology of medical devices, a comparative analysis is necessary in advanced systems internationally in order to prepare domestically applicable plans for improvement in classification and differential grade management for items of medical devices. This research examines and analyzes the differences of definition and legal systems of medical devices among Korea, United States, EU, Japan and China, and investigates classification and grading system of each country to identify disadvantages of classification and grading structures for medical device in Korea. This research suggests ways to supplement the disadvantages of domestic classification and grading system of medical devices, and elicits differential management plans for medical devices.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.21-22
• /
• 2021

Domestic residential buidling grading is currently comprised of 5 fields; sound-proofing, structure, ambient condition, living environment and fire-proofing. However, factors the take up most of the civil complaints are related to leakage, and waterproofing is not listed as part of the grading system. In particular, the Ministry of Land and Transport claims that the most crucial problems are leakage related in residential structures. Therefore, this study proposes to provide such grading system for waterproofing by AHP methodology based on waterproofing application locations in residential structures.

• 복식문화연구
• /
• 제10권5호
• /
• pp.518-531
• /
• 2002

The purpose of this study was to research specific dimensional increments of grading and to support to establish a grading system according to the targets of women's wear manufacturers in Korea. For the questionnaire, 91 women's wear brands, which were in higher ranking of sales, were selected, and the age groups were separated into 3: 20's, 30's, and 40's & 50's, according to their customers. The graders of each brand were questioned about specific dimensional increments of grading fur this research. The results of the study were as follows: 1. Using the most common dimensional increments, 3.81cm(1 f inch) and 5.08cm(2 inch) for upper garments and lower garments, the modes of increments and reference increments for each garment section were suggested. 2. For upper garments, the brands for older women made larger increments of waist girth than for bust girth. This was to cover abdominal obesity. Also, the brands made larger increments of girth than for shoulder breadth. 3. For lower garments, the brands for older women made larger increments of waist girth than fur hip girth. It meant the drop value of hip girth minus waist girth was smaller. The breadths of front and back crotch were also wider.

• 한국의류학회지
• /
• 제25권6호
• /
• pp.1069-1078
• /
• 2001

Pattern grading is a technique used to increase or decrease the size of a garment pattern according to the measurements in a given size chart. The original pattern is graded and laid out for cutting before mass production. This study tried to classify body types for pattern grading of jacket by applying a concept of "drop"defined as the difference between chest girth and waist girth and the difference between hip girth and waist girth for pants. Data were collected through the stratified sampling method. 138 subjects were selected out of 1,290 subjects of our sample population. Findings were as follows : 1) For pattern grading of jacket, the cell with the chest girth of 96cm and the waist girth of 87cm had the highest frequency rate and body type was 87H type and the coverage of this type was 9.52%. Then, the size specification 87-96 was the center of distribution. H type had seven ones such as 72H, 75H, 78H, 81H, 84H. 87H and 90H. H type had 33 observations and frequency ratio of 26.19%. Same types could be graded up and down from the reference size for the age group. And this reference size became to the starting point for developing the grading system. 2) For pattern grading of pants, fatty types, H10 type had six ones such as 80H10. 82H10, 84H10, 86H10, 88H10 and 90H10. H10 type had 28 observations and frequency ratio of 20.29%. H6 type had 6 ones such as 84H6, 86H6, 88H6, 90H6. 92H6 and 94H6. H6 type had 27 observations and frequency ratio of 19.57%. If lower body types were classified as same ones, these types could be graded up and down proportionately.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.43-56
• /
• 1994

The Purpose of this study was to utilize of CAD System in pattern making process for women's apparel. The automation by the use of CAD System provides the higher accuracy and efficiency in pattern making process. AccuMark 300 System was used. for .this study. The results from this study were as follows . 1. New size spec chart and grading pitch chart were developed based on the data analysis and fitting tests for female college students. 2. New jacket block was developed based on the torso length sloper 3. Automatic grading of jacket block have been developed by creation and modification of grading rules of block pattern. 4. Pattern Design Systyem(P/D/S) were enabled to be constructed directly form a block pattern by modifications to existing styled pattern. 5. Original master pattern was generated by P/D/S menu option. 6. Production pattem added seam allowance, notchs was generated by P/D/S menu option. 7 Interative maker making process have enabled to save a wide range of time and space. 8. Measurement of garment by P/D/S measuring tools is to utilize in garment costing, quality control.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.105-112
• /
• 2008

옻칠은 채취된 산지별, 기후변화별, 채취시기별, 저장 등 각각의 요인에 따라 구성성분이 달라지며, 도료로서의 품등도 달라지는 성질을 가진 천연도료라는 점을 고려할 때 옻칠의 품등 구분은 매우 어렵다. 전통적 방법에 의한 옻칠의 품등구분은 옻칠종사자 10명의 패널에 대한 관능평가에 의해 실시하였다. 옻칠종사자들의 전통적인 옻칠 품등구분 방법의 공통점은 색조, 냄새, 점도, 한지 위 퍼짐성, 유리판 위 색조 및 건조성에 의해 판단하고 있으며, 그 외 한지 위 문지르기, 알코올램프 가열에 의한 감량 조사가 있었다. 패널요원 10인에 의한 5개 항목에 대한 전체평균의 결과, 중국산 생칠(E)이 7.03로서 가장 우수하였고, 그 다음이 일본산 생칠(C) 6.84, 한국산 생칠(A) 6.41, 중국산 생칠(D) 5.27 그리고 한국산 화칠(B) 2.50 순으로 나타났다. 그러나, 각 패널들이 평가한 결과는 한지위 퍼짐성에 의한 품등구분 이외에는 서로 다른 견해를 나타내는 경우가 있어 전통적인 방법만에 의한 품등구분에는 객관성과 공정성이 결여될 소지가 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권4호
• /
• pp.337-345
• /
• 2013

국산 원목의 유통체계 개선을 위해서는 원목 품질을 신뢰할 수 있는 있는 등급체계가 정착되어야 한다. 원목시장의 현실과 괴리된 원목규격의 개선을 위해 국내에서 생산되는 원목 현황과 원목이 사용되는 시장에 대한 분석이 필요하다. 이를 위해 2010년과 2011년에 국내 5개 지방산림청에서 생산 매각한 천만 본 이상의 원목자료를 수집하여 각 수종별로 경급과 재장을 분석하였다. 이를 바탕으로 원목규격의 경급과 재장구분 기준에 대한 개선방안을 모색하고자 하였다. 본 연구 주요결과를 요약하면 다음과 같다. 국산 침엽수 원목의 경급은 100~160 mm 범위의 소경재가 대부분을 차지하여 현행 원목규격의 재종구분이 현실에 비해 다소 과도하게 설정되었음을 확인할 수 있었다. 원목의 경급분포는 수종별로 서로 상이한 분포특성을 보여 수종별로 차별화된 경급기준의 필요성이 제기되었다. 국내에서 생산되는 원목의 재장이 수종마다 서로 상이하고, 제재용으로 선호되는 재장을 적극적으로 생산하지 못하는 문제점을 반영하여 재장에 관한 기준이 원목규격에 포함될 필요가 있다는 점을 확인하였다. 이러한 결과를 바탕으로 3개 수종군, 6개 재종의 새로운 침엽수 원목 구분체계를 제안하였으며, 각 등급에 적합한 지름 및 재장기준을 제시하였다.