• Journal of Biomedical Engineering Research
• /
• v.12 no.3
• /
• pp.203-208
• /
• 1991

Balancing left/right cardiac output is essential for the automatic control of total artificial hearts(TAH). A fuzzy logic-based control method is presented. We use left atrial pressure( LAP) ann right a'rial pressure( RAP ) as indicators for left/right balancing. The fuzzy controller has four input variables which are measured LAP and RAP and their gradients. Desired variations in left cardiac output(LCO) and right cardiac output(RCO) are cal- culated to keep LAP and RAP within the Physiological limlts. Computer simulations were performed to adjust fuzzy membership functions for variables and verify this control method. Results from simulations showed that LAP and RAP returned to the physiological limits while AoP and PAP stayed within the physiological limits.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.45-48
• /
• 1993

High-order field gradients are useful for spatial localization of a volume of interest and dynamic range improvement of signal detection in NMR (Nuclear Magnetic Resonance) spectroscopy and imaging. This paper proposes a design method of shielded high-order gradient coils to reduce tile effect of eddy current on tile spectroscopy and imaging results. According to the experimental results, the shielded gradient coils produce less than 2 % eddy current compared to non-shielded coils. Two shielded $z^2$ gradient coils have been designed and constructed for 1.5 T whole-body and 3.0 T animal NMR imaging systems. Experimental results are in good agreement with the theoretically expected behavior and show the utility of the shielded high-order gradient coils.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.4
• /
• pp.17-29
• /
• 2004

Internal waves are computed using a ghost fluid method on an unstructured grid. Discontinuities in density and dynamic pressure are captured in one cell without smearing or oscillations along a multimaterial interface. A time-accurate incompressible Navier-Stokes/Euler solver is developed based on a three-point backward difference formula for the physical time marching. Artificial compressibility is introduced with respect to pseudotime and an implicit method is used for the pseudotime iteration. To track evolution of an interface, a level set function is coupled with the governing equations. Roe's flux difference splitting method is used to calculate numerical fluxes of the coupled equations. To get higher order accuracy, dependent variables are reconstructed based on gradients which are calculated using Gauss theorem. For each edge crossing an interface, dynamic pressure is assigned for a ghost node to enforce the continuity of total pressure along the interface. Solitary internal waves are computed and the results are compared with other computational and experimental results.

• Journal of the Korean Society for Railway
• /
• v.8 no.1
• /
• pp.57-62
• /
• 2005

The frost heaving pressure can be a problem for weakening of the railway roadbed material. This study was initiated to investigate the soils frost heaving pressure and physical characteristics(Liquid limit, permeability, SEM analysis) resulting from freezing and freezing-thawing cycle process. Therefore, upon freezing a saturated soil in a closed-system from the top, a considerable pressure was developed. Weathered granite soils, sandy soil were used in the laboratory freezing test which sometimes subjected to thermal gradients under closed-systems. The frost heaving pressure arising within the soil samples and the temperature of the samples inside were monitored with elapsed time. The degree of saturation versus heaving pressure curve is also presented for weathered granite soil and the maximum pressure is closely related to this curve. Based on the laboratory test results, fine-grained soils with strong attractive forces between soil grains md water molecules, and additional water is attracted into the pores leading to further volume changes and ice segregation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.1
• /
• pp.46-52
• /
• 2016

We propose a new type of semi-global matching (SGM) in order to solve a streaking problem arising from conventional SGM. Conventional SGM imposes a penalty to a pixel when the disparity of the pixel differs from that of the previous pixel along a scan path, and thus, disparity changes are not easily allowed, causing the streaking effect. The road surface is an appropriate target for such an effect, because the colors of the surfaces are very similar, and the image pixels corresponding to the surfaces show disparities that change very smoothly along the viewing direction. In contrast to conventional SGM, the new type of SGM imposes penalties depending on the disparity gradients, and thus, the streaking effect is controlled. The experimental results show the effectiveness of the proposed SGM method.

• The Korean Journal of Ecology
• /
• v.21 no.5_1
• /
• pp.419-426
• /
• 1998

Twenty-two forest stands and one hundred and fourteen plant species were ordinated by a reciprocal averaging(RA) method to extract the major forest patterns of the Quercus forests in Mts. Wolak, choryong, Juhul and Bohyun. The RA stand ordination on the first and second axes revealed a gradient of vegetation. It is the gradient from the Quercus mongolica-dominated forest to the Quercus serrata-dominated forest or Quercus variabilis-dominated forest. An intermediate zone between the two forest types was recognized by the RA stand ordination. Especially the zone on Mt. Bohyun was evidently higher than those of the other mountains. The gradient also showed the environmental one from mesic to xeric habitats and from higher to lower altitudes. The RA species ordination showed the distribution center of each species in the above mentioned patterns of the forest vegetation.

• The Korean Journal of Ecology
• /
• v.11 no.3
• /
• pp.109-122
• /
• 1988

The foret vegetations of Daedunsan provincial park area in Korea were classified into eight communities of Acer mono-Zelkova serrata, Lindera erythrocarpa-Cornus controversa, Carpinus tschonoskii, Quercus variabilis, Quercus serrata, Carpinus laxiflora, Rhododendron schlippenbachii-Quercus mongolica and Rhododendron mucronu-latum-Pinus densiflora by the Z-M method. By two dimensional analysis of temperature, moisture gradients, the eight communities were grouped into four vegetation types: cove forest dominated with Zelkova serrata and Cornus controversa, hornbeam forest with Carpinus tschonoskii and Carpinus laxiflora, oak forest with Quercus variabilis, Quercus mongolica, Carpinus laxiflora, Carpinus tschonoskii, Zelkova serrta and Pinus densiflora community was made from the analysis of actual vegetation map by the phytosociological classification, environmental conditions and human interferences.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.7
• /
• pp.364-369
• /
• 2004

In this Paper, a flashover prediction method using the leakage current in the contaminated EPDM distribution polymer insulator is proposed. The leakage currents on the insulator were measured simultaneously with the different salt fog application such as 25g, 50g, and 75g per liter of deionized water. Then, the measured leakage currents were enveloped and transformed as the CDFS using the Hilbert transform and the level crossing rate, respectively. The obtained CDFS having different gradients(angles) were used as a important factor for the flashover prediction of the contaminated polymer insulator. Thus, the average angle change with an identical salt fog concentration was within a range of 20 degrees, and the average angle change among the different salt fog concentrations was 5 degrees. However, it is hard to be distinguished each other because the gradient differences among the CDFS were very small. So, the new weighting value was defined and used to solve this problem. Through simulation, it Is verified that the proposed method has the capability of the flashover prediction.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.120-124
• /
• 2002

A new methodology is presented to diagnose faults in equipment plasma. This is accomplished by using neural networks as a pattern recognizer of radio frequency (rf) impedance match data. Using a match monitor system, the match data were collected. The monitor system consisted mainly of a multifunction board and a signal flow diagram coded by Visual Designer. Plasma anomaly was effectively represented by electrical match positions. Twenty sets of fault-symptom patterns were experimentally simulated with variations in process factors, which include rf source power, pressure, Ar, and $O_$2 flow rates. As an input to neural networks, two means and standard deviations of positions were used as well as a reflected power. Diagnostic accuracy was measured as a function of training factors, which include the number of hidden neurons, the magnitude of initial weights, and two gradients of neuron activation functions. The accuracy was the most sensitive to the number of hidden neurons. Interaction effects on the accuracy were also examined by performing a 2$^$4 full factorial experiment. The experiments were performed on multipole inductively coupled plasma equipment.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1874-1876
• /
• 2000

In this paper, the effects of the positions of the current probe on the measurements of the ground resistanc, and potential gradients with fall-of-potential method are described, and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position of the measuring auxiliary probes. The ground resistance is calculated by applying the 61.8% lute using fall-of-potential method.