• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.724-727
• /
• 2006

It has long been known that the oxidation kinetics of Zr-based alloys undergoes a crossover from parabolic to cubic in the pretransition period (before breakaway of the oxide scale). This kinetic crossover, however, is not fully understood yet. We have earlier proposed a model for the Zr-oxidation kinetics, in a closed form for the first time, by taking into account a compressive strain energy gradient as a diffusional driving force in addition to a chemical potential gradient of component oxygen across the ZrO$_2$ scale upon Zr [J. Nucl. Mater., 299 (2001) 235]. In this paper, we experimentally reconfirm the validity of the proposed model by using the thermogravimetric data on mass gain of Zr in a plate and wire form, respectively, in air atmosphere at different temperatures in the range of 500$^{\circ}$ to 800$^{\circ}C$, and subsequently report on the numerical values for oxygen chemical diffusivity and strain energy gradient across the oxide scale.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.250-252
• /
• 1995

이 논문의 목적은 Target field approach를 사용하여 2차원적인 공간선택을 할 수 있는 방사형 표면 경사 자계코일 (Radial SGC : Radial Surface Gradient Coil)을 설계하는 것이다. 지금까지 쓰이던 원통형의 고차경사자계코일을 이용한 2차원적 원형 선택방법은 한개의 RF Puise로 2차원적인 공간 선택을 할 수 있는 장점이 있었으나 선택되어지는 체적의 지름이 6-8cm로 너무 크다는 단점이 있었다. 이 논문에서는 이와같은 단점을 극복하기 위해 영상을 얻고자하는 부분에 코일을 좀 더 가까이 붙일 수 있으며 선택되어지는 체적의 지름을 1-4cm까지 줄일 수 있는 표면 고차자계코일을 Target field approach 방법을 이용하여 설계하였으며 Phantom과 인체영상을 통해 제작된 코일의 성능을 확인해 보았다. 과거에 사용되었던 Field component method에서는 선택되는 부분이 찌그러지는 경우가 있었으나 Target field approach 방법에 의해 설계된 코일에 의하여 선택되는 부분은 이상적인 원에 가까운 모양이 되었다.

• Phonetics and Speech Sciences
• /
• v.7 no.4
• /
• pp.17-25
• /
• 2015

For blind source separation of convolutive mixtures, FDICA(Frequency Domain Independent Component Analysis) algorithms are generally used. Since FDICA algorithm such as Sawada FDICA, IVA(Independent Vector Analysis) works on the frequency bin basis with a natural gradient descent method, it takes much time to converge. In this paper, we propose a new method to improve convergence speed in FDICA algorithm. The proposed method reduces the number of iteration drastically in the process of natural gradient descent method by applying a weighted inner product constraint of unmixing matrix. Experimental results have shown that the proposed method achieved large improvement of convergence speed without degrading the separation performance of the baseline algorithms.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.1
• /
• pp.47-53
• /
• 2003

An experimental study on the chromatographic separation of maltopentaose from a mixture, including glucose, maltose, maltotriose, and maltopentaose, was carried out in a nonionic polymeric sorbent column while varying the operating conditions, such as the solution pH, buffer contents, and isopropyl alcohol (1PA) concentration. Unlike the pH and buffer contents, the IPA concentration had a Significant impact on the single component chromatograms for maltopentaose. The retention times of the maltooligosaccharides with the nonionic polymeric sorbent Sp207 were in the following order: glucose < maltose < maltotriose < maltopentaose. From the experimental binary, ternary, and quaternary chromatograms, gradient chromatographic separation with a changing IPA concentration as a function of time was required to obtain high-purity maltopentaose and reduce the elution time.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.49-56
• /
• 2002

A two-dimensional direct numerical simulation is performed to investigate the formation characteristics of a single vortex interacting with $CH_4/N_2$-Air counterflow nonpremixed flame. The numerical method was based on a predictor-corrector scheme for a low Mach number flow. The detailed transport properties and a 16-step augmented reduced mechanism are adopted in this calculation. The budgets of the vorticity transport equation arc examined to reveal the mechanisms leading to the formation, evolution and dissipation of a single vortex interacting with counterflow nonpremixed flame. It is found that the stretching term, which depends on the azimuthal component of vorticity, and radial velocity, mainly generates vortieitv in non-reacting and reacting flows. The viscous and baroclinic torque term destroy the vorticity in non-reacting flow. In addition, the baroclinic torque term due to density and pressure gradient generates vorticity, while viscous and the volumetric expansion terms due to density gradient destroy vorticity in reacting flow.

• Journal of Biomedical Engineering Research
• /
• v.6 no.2
• /
• pp.53-62
• /
• 1985

The position and time interval of wave components of the electrocardiogram are used as important data for physician's diagnosis. In case of using the existing definition of the onset of the wave component of the electrocardiogram, they have some problems of defining the precise position of the isoelectric line, of defining the limit of the gradient accepted as the onset, and of the gradient being changed by noise. Therefore, in this paper all time intervals and positions of wave components needed for data of diagnosis were obtained correctly by turning point data reduction algorithm and linear regression intersection algorithm, and the viability of the method of intersecting lines was established in comparison to the four methods of calculating the PR interval.

• Journal of computational fluids engineering
• /
• v.16 no.3
• /
• pp.47-51
• /
• 2011

Dark Mura phenomena which can happen at the region with high temperature gradient in a Notebook LCD Monitor using LED light source has numerically been studied. The calculation was conducted under the nearly realistic conditions by considering the anisotropic thermal properties of materials and the real dimensions of each component. The two performance indices of LED monitor, i.e., the maximum temperature and the spacial gradient of temperature were examined for the various shapes, lengths and thickness of heat sink plate. Calculated results give more reasonable temperature distribution comparing with experimental results.

• Applied Biological Chemistry
• /
• v.2
• /
• pp.36-39
• /
• 1961

It has been ascertained that S-(1, 2-dichlorovinyl) L-cysteine (DCVC) is probably the toxic component in the trichloro-ethylene extracted soybean oil meal on the bovine. For the study of the metabolites of DCVC, the components with radioactive $S^{35}$-in the urine of the calf, to which $S^{35}$-DCVC was administrated, were separated using of cellulose powder with propanol-water (70:30 V/V) which is easily removable by evaporation. As the results followings were obtained: Peak 1, which shows fractions containing single $S^{35}$-radioactive components, whose Rf is 0.815 Peak 2, which shows fractions containing jingle $S^{35}$-radioactive component, whose Rf is 0.447 Peak 3, which shows fractions containing both $S^{35}$-radioactive components whose Rfs are 0.090 and 0.171 Peak 4, which shows fractions containing single $S^{35}$-radioactive component, whose Rf is 0.142. Peak 5, which shows fractions containing single $S^{35}$-radioactive component, whose Rf is 0.084. Besides these, two of small peak were obtained. Although, the resolving power of the cellulose powder column is not sufficient, it is applicable for the study of the components of metabolytes of DCVC conveniently with the rest of removable solvent easily. Also the components with radioactive $S^{35}$ in the feces of the calf were separated using citrate buffer gradient system of Moore and stein. As the results; three $S^{35}$-radioactive components were separated.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.365-370
• /
• 2014

For real-time monitoring of colloidal nanoparticles (NPs) in aqueous media, a light sheet type dark-field microscopy system combined with a microfluidic concentration gradient generator (${\mu}FCGG$-LSDFM) was developed. Various concentrations of colloidal Au NPs were simultaneously generated with the iFCGG and characterized with the LSDFM setup. The number concentrations and hydrodynamic size distributions were measured via particle counting and tracking analysis (PCA and PTA, respectively) approaches. For the 30 nm Au NPs used in this study, the lower detection limit of the LSDFM setup was 3.6 ng/mL, which is about 400 times better than that of optical density measurements under the same ${\mu}FCGG$ system. Additionally, the hydrodynamic diameter distribution of Au NPs was estimated as $39.7{\pm}12.2nm$ with the PTA approach, which agrees well with DLS measurement as well as the manufacturer's specification. We propose this ${\mu}FCGG$-LSDFM setup with features of automatic generation of NP concentration gradient and real-time monitoring of their physicochemical characteristics (e.g., number concentration, and hydrodynamic size distribution) as an important component of future high-throughput screening or high-content analysis platforms of nanotoxicity.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.77-80
• /
• 2002

Thermal analysis has been performed to evaluate the thermal effect on composite antenna (Ka-band) structure in space environment. The concepts of thermal control are also presented to maintain the antenna components within respective temperature limits. A steady-state algorithm of I-DEAS' thermal analysis software was utilized to predict both maximum and minimum temperature, maximum gradient temperature, and temperature distribution on each antenna component.