• 동의생리병리학회지
• /
• 제17권5호
• /
• pp.1235-1242
• /
• 2003

This study was performed for the investigation of vasodilatory effects of Crataegus pinnatifida Bunge and for isolation and structure determination of the constituent from the active fraction. The fruits of this herbal drug were extracted with 80% methanol, then fractioned successively with methylene chloride, ethylacetate and n-butanol. Among the fractions, ethyl acetate fraction exhibited the most effective vascular relaxation against phenylephrine-induced arterial contraction. In order to isolate the active constituent by activity-guided fractionation, this fraction was chromatographed on silica gel to yield seven subfractions. Among the subfractions, the active one showing the most potent vascular relaxation activity was further separated by prep. HPLC with reversed phase Microsorb C-18 column using 1 % acetic acid and methanol gradient solvent system to afford one pure compound, which revealed a potent vasodilatory effect. Instrumental analyses (NMR and mass spectrometry) of the isolated constituent indicated this compound to be (-)-epicatechin. The vasodilatory action mechanism of this compound should be further investigated.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.54-61
• /
• 2003

The first stage rotating blade of industrial gas turbine is one of the components that is normally run in exposed state at the highest temperature of the combustion gas stream. For this reason superior materials and advanced cooling technology are required to allow higher heat resisting characteristics of the component. The 1st stage blade of a selected commercial gas turbine blade made of directionally solidified Ni-based superalloy has a row of cooling holes on its trailing edge. In most cases, minor cracks have been found at some of the root cooling holes after one cycle operation (24,000 hrs) or even shorter operation time because of the high temperature gradient and the frequently alternating thermal stress. In the repair process, unfortunately, it is usually very difficult to get rid of the damage due to the fact that cracks are initiated at the root cooling hole and propagated deep into the hole. In this study, the feasibility of removing the sidewall cracks in the hole by utilizing EDM drilling has been investigated. Also the criteria of surface integrity for EDM drilling were established to achieve high quality repair as well as machining accuracy.

• The Korean Journal of Ecology
• /
• 제23권6호
• /
• pp.439-444
• /
• 2000

Forest vegetation in Mt. Jangan County Park, Jeonlabuk-Do, Korea, was investigated by classification and ordination methods. By the cluster analysis (classification) method, nine groups were recognized as follows : Quercus serrata community, Quercus serrata- Carpinus laxiflora community, Cornus controversa community, Fraxinus mandshurica community, Carpinus laxiflora community, Quereus variabilis community, Quercus mongolica - Sasa borealis community. Quercus mongolica - Symplocos chinensis for. pilosa community and Quercus mongolica - Rhododendron schlippenbachii community. These groups showed differences in species composition and environmental characteristics, but Quercus mongolica - Sasa borealis community, Quercus mongolica - Symplocos chinensis for. pilosa community and Quercus mongolica - Rhododendron schlippenbachii community among them showed very similar floristic composition to each other. The interrelationship between the floristic composition of the vegetation and environmental factors was analysed by principal component analysis (PCA). Quercus mongolica community was distributed at a high altitude (900～1200 m above sea level). Fraxinus mandshurica community and Cornus controversa community were differentiated from the other communities with high contents of soil moisture and pH. On the other hand, Carpinus laxiflora community and Quercus variabilis community were distributed at places with adequate levels of soil moisture, soil organic matter. and at low altitude. In this study, the altitude and soil moisture were the main factors determining the forest vegetation. They were strongly correlated with the dominant compositional gradient at the localities examined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.120-121
• /
• 2006

In this paper, We have designed a face recognition system based on the embedded Linux. This paper has an aim in embedded system to recognize the face more exactly. At first, the contrast of the face image is adjusted with lightening compensation method, the skin and lip color is founded based on YCbCr values from the compensated image. To take advantage of the method based on feature and appearance, these methods are applied to the eyes which has the most highly recognition rate of all the part of the human face. For eyes detecting, which is the most important component of the face recognition, we calculate the horizontal gradient of the face image and the maximum value. This part of the face is resized for fitting the eye image. The image, which is resized for fit to the eye image stored to be compared, is extracted to be the feature vectors using the continuous wavelet transform and these vectors are decided to be whether the same person or not with PNN, to miminize the error rate, the accuracy is analyzed due to the rotation or movement of the face. Also last part of this paper we represent many cases to prove the algorithm contains the feature vector extraction and accuracy of the comparison method.

• 한국소음진동공학회논문집
• /
• 제24권10호
• /
• pp.809-816
• /
• 2014

This paper presents a systematic optimization process for designing an electromagnetic vibration energy harvester using FEA(finite element analysis) to improve computational accuracy and efficiency. A static FEA is used in the optimization process where trend analysis in a short period of time is rather important than precise computation, while a dynamic FEA is used in the verification step for the final result where precise computation is more important. An electromechanical transduction factor can be calculated efficiently by using an approach to use the radial component of magnetic flux density directly instead of an approach to compute the flux density gradient. The proposed optimization process was verified through a case study where simulation and experiment results were compared.

• 한국연초학회지
• /
• 제8권1호
• /
• pp.13-21
• /
• 1986

The fragility, which express the fineness index, increased linearly with the moisture content for various tobacco shreds and showed a high correlation to the moisture content. Then, fineness index (FIs) at reference moisture content(l2.5%) was obtained by following equation. FIs=FIm+A(12.5-Mm) A" denote the gradient of simple linear regression equation between the fineness index and moisture content. FIm; the fineness index measured at the standard moisture content(12.5%). The characteristics of fragility concerning with some kinds of tobacco raw materials, stalk position, moisture content and storaged time were investigated. The following results were obtained. 1. The moisture content range of less fragile of tobacco raw material was from 16% to 20%. whereas the rolled process sheet tobacco was from 12% to 16%. 2. The Bright yellow and the paper process sheet tobacco were less fragile than that of the other tobacco raw materials. 3. The leaves were more distant from middle stalk position, and its become more fragile. 4. Physical properties of the storaged tobacco leaves were determined as a function of each storageunction of each storage time. The long-term storaged leaves(more than 3 years) were slightly lighter weight, more fragility and lower equilbrium moisture content than thos of the mid-term storaged leaves.(less than 3 years). 5. Contents of chemical component of the storaged leaves were determined every storage time. The long-term storaged leaves were slightly lower content of nicotine and chlorine than those of mid-term storaged leaves, but contents of crude fiber, total ash and calcium were increased significantly.

• 한국수산과학회지
• /
• 제35권4호
• /
• pp.451-453
• /
• 2002

The rotation of the flagellar motor is powered by the electrochemical gradient of specific ions across the cytoplasmic membrane. Recently, the gents of the Na'-driven motor have been cloned from marine bacterium of Vibrio sp. and some of the motor proteins have been purified and characterized. Also, motx gene encoding a channel component of the sodium type flagellar motor was identified from Vibrio Huuiaiis (KTCC 2473). The amino acid sequence of MotX protein from V, Huvialis shared 90, 85, $85\%$ identity with V, cholerae, V. alginolyticus, V parahaemolyticus, respectively. We have studied the localization of the expressed MotX protein in Escherichia coli by immune-gold labeling of ultra-thin frozen section. Our observation of the expressed protein indicated that MotX protein could be existed as attachment to inner membrane in E. coli.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.61-70
• /
• 1988

In order to consider the concept of the fitness for purpose'in fatigue design of offshore structure, fracture mechanics is applied to evaluate initial or weld defects. Generally, linear elastic fracture mechanics has been applied to tstimate initial fatigue crack propagation rate as well as long fatigue crack propagation rate. But, initial fatigue crack propagation rate in elasto-plastic notch field may not be characterized by application of stress intensity factor range .DELTA. K, because plastic effect due to stress concentration of notch may contribute to initial crack propagation. Therefore, to introduce the plastic effect into fatigue crack driving force, in this studty, the evaluating method of J-integral range .DELTA. J, was developed by willson was modified for application to notch field. In calculation of .DELTA. J obtained from the modified J-integral, stress gradient and crack closure behavior in the notch field were considered. The initial crack propagation rates in the notch fields of mild steels and high tensile strength steels were correlated to .DELTA. J. As the result, it was cleared that the present .DELTA. J is applicable to charachterize the fatigue crack propagation rates in both the elastic and elasto-plastic notch fields.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1005-1008
• /
• 1993

Supervised learnmg 01 recurrent neural networks (RNNs) is discussed. First, we review the present state of art, featuring their major properties in contrast of those of the multilayer neural networks. Then, we concisely describe one of the most practical learning algorithms, i.e. backpropagation through time. Revising the basic formulation of the learning algorithms, we derive a general formula to solve for the exact solution(s) of the whole connection weights w of RNNs. On this basis we introduce a novel interpretation of the supervised learning. Namely, we define a multidimensional Euclidean space, by assigning the cost function E(w) and every component of w to each coordinate axis. Since E=E(w) turns up as a hyper surface in this space, we refer to the surface as learning surface. We see that topological features of the learning surface are valleys and hills. Finally, after explicating that the numerical procedures of learning are equivalent to descending slopes of the learning surface along the steepest gradient, we show that a minimal value of E(w) is the intersection of curved valleys.

• 생약학회지
• /
• 제42권3호
• /
• pp.240-245
• /
• 2011

A high-performance liquid chromatography (HPLC) method was developed for quantitative analysis of liquiritin and glycyrrhizin in Sagunja-tang (SGT, Sijunzi-tang in Chinese), a traditional Korean medicine. HPLC analysis was performed using a Gemini C18 column operating at $40^{\circ}C$, and photodiode array (PDA) detection at 254 nm and 280 nm for quantification of the two components in SGT. The mobile phase using a gradient flow consisted of two solvent systems. Solvent A was 1.0% (v/v) aqueous acetic acid and solvent B was acetonitrile with 1.0% (v/v) acetic acid. Calibration curves were acquired with $r^2$ values > 0.9998, and the relative standard deviations (RSDs, %) for intra- and inter-day precision were not exceed 4.0%. The recovery of each component was in the range of 91.85 - 108.62%, with a RSD less than 4.0%. The contents of the two components in SGT were 7.94 - 13.83 mg/g.