• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.207-211
• /
• 2015

To investigate the usefulness of Kenaf(Hibiscus cannabinus L.) as mushroom culture media source, we analyze physical condition and contents of nutritional components. The water absorption rate of Kenaf bast was 578% and it was 95% higher than that of poplar sawdust's. This was caused by Kenaf's porous cellular structure. so it could give more moisture and oxygen to cultured mushroom. Total carbon contents of Kenaf was 91.4%, it was quite higher than that of poplar sawdust, wheat bran and rice bran. Total nitrogen content was 1.76% and C/N ratio was 51.9. The content of NFE(Nitrogen free extract) was 46.6% and it was similar with rice bran. Cellulose content was higher than poplar but lignin content was lower. specially hemicellulose and pectin complex which more digestible carbon source to mushroom was 3.7% higher than poplar. Mineral component and amino acid contents were also maintained high compared with poplar. Fe was 4.2 times, P 3.2 times, K 2.2 times more and Ca was higher 16 mg/kg than poplar. The content of amino acid was quite more higher than poplar sawdust but lower than chaff. Consequently Kenaf had a good trait for basic support material in mushroom culture media and also had a good character as nutritional source.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.91-91
• /
• 2022

Popcorn grains are consumed around 10,000 tons per year, in South Korea. It is consumed in amusement parks, movie theaters and snacks. The size of the popcorn processed market in Korea is estimated to be 3.6 billon won per year. So, the popcorn grain market has good prospects. On the other hand, domestic grain is at the level of 1 %, which is less domestic production than the size of the market. Maize Research Institute has developed domestic varieties in order to increase the use of domestically produced grains. The Oyrunpopcorn variety which was commonly distributed is a preferred cultivar because it has a good popping rate compared to imported grains. In addition, 'G-Popcom', 'Oyrun #2' and 'Kichan Popcorn' were developed, which diversified the choice of the farmers. Yield per unit area is important to improve farmers' income. At present, domestic grain production is traded at 5,000 won/kg, so if the yield improves, a high farmer^ income is expected. Therefore, this study compared the growth characteristics and yield according to the appropriate sowing time and plant density to improve the yield of domestically grown popcorn. We used 'Oryunpopcorn', for this research. Agronomic characteristics were compared by sowing times April 23, May 22 and June 22. The 100 seeds weight were 15.9g, 17.7g and 15.0g, respectively. Kernel weight planted in May 22 is the highest value. Yield per 10a were 414kg, 434kg and 296kg, respectively. It shows the yield planted in May 22 was higher than other trials. Therefore, the sowing time to increase the kernel weight and yield is appropriate for planting in mid-May. The number of plants in planting density trial was 5,700 plants, 4,700 plants and 4,000 plants in 10a area. Plant height at each trial were 221 cm, 214cm and 218cm, respectively. It was the highest height in 5,700 plants trials. The 100 kernel weight were 14.8g, 15.9g and 16.5g, respectively. Low planting density trial indicated high kernel weight. Yield per 10a was 415kg, 357kg and 314kg, respectively. It was higher at high density trial than other experimental plots. Therefore, appropriate sowing time was in mid-May and planting density was 5,700 plants/10a in order to increase the yield of popcorn in South Korea. This study will be useful for farmer's income to use the domestic cultivars.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.1 no.1
• /
• pp.65-74
• /
• 1995

There is no line of demarcation between the shoulder and elbow regions. Pain In the arm may originate at the shoulder with reference downwards or less often at the elbow with reference upwards. Most pains indicated by the patient at the elbow or forearm have a local origin, since at the more distal part of the upper limb the capacity for correct localization is good. Once it is clear that the elbow region is at fault, the joint and the muscles about it are tested by ten movements. 1. Four. Passive extension, flexion, pronation, supination-full range, LOM, painful, painless. 2. Four. Resisted extension, flexion, pronation, supination-strong, weak, painful, painless. 3. Two. Resisted flexion, extension at the wrist-painful, painless. The muscles that perform theses two movements arise from the humeral epicondyles and a lesion in either often causes pain felt at the elbow although the tissuse affected is not functionally a part of the elbow (i. e. Tennis elbow and Golfer's elbow).

• Rapid Communication in Photoscience
• /
• v.3 no.4
• /
• pp.76-78
• /
• 2014

Fluorescent nucleic acids were prepared utilizing the polymerase extension (PEX) reaction to incorporate fluorescent molecules. 2'-Deoxyuridine triphosphate (dUTP) derivatives possessing pyrene molecules as fluorophores were synthesized using the aqueous-phase Sonogashira coupling between 5-Iodo-dUTP and acetylene-linked pyrene molecules. The incorporation of the pyrene (Py)-labeled deoxyuridine triphosphates (PyU) into DNA by polymerase was evaluated by polyacrylamide gel electrophoresis, demonstrating that the PyU can work as a good substrate for the PEX reaction. The fluorescent properties of the functionalized DNA prepared by the PEX reaction were characterized by steady-state fluorescence measurements. The Py-conjugated DNA showed typical emission spectra of the pyrene, and the DNA with two pyrene molecules connected to each other by a diethylene glycol linker exhibited a broadened emission attributed to the electronic interaction between the Py molecules.

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.2
• /
• pp.9-16
• /
• 2003

Piezoelectric materials are widely used to construct smart or adaptive structures. Although extensive efforts have been devoted to the analysis of piezoelectric materials in recent years, most researches have been conducted by assuming that the material properties are fixed and have no uncertainties. Intrinsically, material properties have a certain amount of scatter and such uncertainties can affect the performance of component. In this paper, the convex modeling is used to consider such uncertainties in calculating the crack extension force of piezoelectric material and the results are compared with the one obtained via the Monte Carlo simulation. Numerical results show that crack extension forces increase when uncertainties considered, which indicates that such uncertainties should not be ignored for reliable lifetime prediction. Also, the results obtained by the convex modeling and the Monte Carlo simulation show good agreement, which demonstrates the effectiveness of the convex modeling.

• Journal of the Korean Institute of Rural Architecture
• /
• v.1 no.3
• /
• pp.35-44
• /
• 1999

When modern farm houses were built, they were made up of only residential parts. So that many new accessory building-private residential room, toilet, warehouse, storeroom, barn, cattle pen and etc.-were made without any order around modern farm houses. This study is aimed at grasping how the process and contents of extension of the accessory building of modern farm houses have been changed, understands and explicates the reason why accessory buildings of modern farm houses were changed and bring forward better directions about accessory building of modern farm houses at Samchok seashore area of Kangwon Province. The way for it which be made good that the scenery of a rural district was ruined by accessory buildings distributes and develops various standard models about accessory buildings that they are becoming to modern farm houses.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.690-692
• /
• 2014

To identify characterization of a simple extension chamber that have the two internal partition, produce the curve to estimate the transmission loss without the computer analysis. For helpful for internal optimum design, identify the characteristic of internal partition on transmission loss. Made estimated transmission loss curve by function of relationship of internal partition and transmission. Check the similarity of predicted transmission loss and analysis transmission loss. Usage of the predicted transmission loss made by relationship of internal partition and transmission loss is good information to place the internal partition so as to maximize the transmission loss on target frequency at optimal design on muffler.

• Journal of the Korean Wood Science and Technology
• /
• v.1 no.2
• /
• pp.11-15
• /
• 1973

This study was carried out to utilize sweet potato, and jerusalem artichoke flour as an extender of urea formaldehyde resin for plywood manufacture. The results obtained are summarized as follows: 1) In dry and wet test of plywood, sweet potato flour extended in urea formaldehyde resin was shown better strength than those of wheat flour. 2) Sweet potato flour was shown good results up to 200 percent extension in the dry test, and there was not shown significant difference between 100 percent and 150 percent extension in the wet test. 3) In the case of 100 percent extension, potato flour was shown best dry shear strength(400 psi) and sweet potato flour was shown best wet shear strength (212 psi).

• Journal of Life Science
• /
• v.10 no.1
• /
• pp.61-67
• /
• 2000

An experiment was conducted for extension of shelf-life of cooked squid (Todarodes pacificus) using modified atmosphere packaging. The products were packed in a Ny/PE/LLDPE (0.015/0.045/0.040 mm) laminated film with air, vacuum, CO2 gas, and N2 gas, respectively, and then stored at 5$^{\circ}C$ and 2$0^{\circ}C$. Keeping qualities of the products were investigated by measuring moisture content, H, volatile basic nitrogen (VBN), viable cell count, thiobarbituric acid (TBA) value, peroxide value (POV) and color value. Good qualities of the products stored at 5$^{\circ}C$were maintained at least 9 days, 11 days, more than 35 days and 24 days in air, vacuum, CO2 gas and N2 gas packaging products, respectively. In cases of 2$0^{\circ}C$ storage, however, the shelf-lives of all the products were only one day. The shelf-life extension of the products were observed in CO2 ga>N2 gas>vacuum>air packaging in order.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.30-34
• /
• 2011

A. arguta is found nationwide whether the altitude is low or high if good drainage is achieved with plenty of water. The distribution of A. polygama seems to be more limited to higher altitude than A. arguta so it can be found in deep valley of highland even in Mt. Halla. A. kolomikta seems rather limited to colder area than A. arguta to Mt. Jiri to the south. Meanwhile, A. rufa is very confined to southern islands including Jeollanamdo and Jeju islands. Some institutes still continue to utilize Korean native Actinidia plants commercially since early 1980's. More collaborative efforts are needed for further development of these plants nationwide.