• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.79-94
• /
• 2005

Because the golf swing is very complex movement, it is varied in different gender, skill level, and club. This study measured kinematic variables in golf swing regarding gender, skill level, and club types using FasTrak electromagnetic tracking system. Golf swing kinematics including time variables, linear and angular displacement variables, angular velocity variables were analyzed and compared through three-way ANOVA The results were as follows: 1. In time variables, Female and driver showed longer backswing time than male and iron. Downswing time was longer in female and nonexperts than male and experts. Backswing time over downswing time was longer in experts than nonexperts. Uncocking time was longer in male and experts than female and nonexperts. The differences were statistically significant (p<.05). 2. In displacement variables, Female and nonexperts showed greater backswing head lift than male and experts. Impact head lift was greater in female, nonexperts, and iron than male, experts, and driver. The differences were statistically significant (p<.05). Experts and driver showed greater top hip rotation angle than nonexperts and iron. Top shoulder rotation angle was greater in male, experts and driver than female, nonexperts, and iron. X-factor was greater in male, experts, and driver than female, nonexperts, and iron. Male and experts showed greater backswing hip sway than female and nonexperts. Impact hip sway was greater in male and iron than female and driver. The differences were statistically significant (p<.05). 3. In velocity variables, Experts displayed higher impact hip rotation velocity than nonexperts. Impact shoulder rotation velocity was greater in male and iron than female and driver (p<.05).

• Korean Journal of Materials Research
• /
• v.15 no.11
• /
• pp.697-704
• /
• 2005

The deformation behavior of a bulk amorphous and crystallized amorphous $Zr_{22.5}Ti_{14}Cu_{12.5}Ni_{10}Be_{22.5}$ alloy extracted from a commercial golf club head was characterized at room temperature ana $300^{\circ}C$. At room temperature, amorphous specimens revealed higher yield stress and ductility than partially crystallized alloy specimens. Amorphous alloy displayed some plasticity before fracture, which resulted from strain hardening and repeated crack initiation and propagation. The fracture is mainly localized on one major shear band, and the compressive fracture angle of the amorphous specimen between the stress axis and the fracture plane was about $40^{\circ}$ Scanning electron microscope observations revealed mainly a vein-like structure in the amorphous alloy But the fracture surface of partially crystallized amorphous alloy consisted of vein-like and featureless fracture structure. The partially crystallized alloy extracted from the thick part of the club fractured in the elastic region, at a much lower stress level than the amorphous, suggesting that relatively coarse crystal particles formed during cooling cause the brittle fracture.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.6
• /
• pp.570-573
• /
• 2012

Avulsion of spinous process, also called Clay-shoveler's fracture, is most prevalent among those engaged in hard physical labor. To the best of the author's knowledge, only one case of multiple spinous process fractures of the upper thoracic spine in a novice golfer has been reported. A 45-year-old female presented with intractable posterior neck pain. The patient experienced a sharp, sudden pain on the neck while swinging a golf club, immediately after the club head struck the ground. Dynamic cervical radiographic findings were C6 and C7 spinous process fractures. Magnetic resonance imaging revealed C6 and C7 spinous process fractures without spinal cord pathology. The patient was treated with pain medications and cervical bracing. The patient's pain gradually improved. The injury mechanism was speculated to be similar to Clay-shoveler's fracture. Lower cervical spinous process fractures can be associated with a golf swing. If the patient complains of long lasting neck pain and has a history of golf activity, further study should be conducted to rule out lower cervical spinous fracture.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.85-94
• /
• 2008

The purpose of this study is to provide basic materials for amateur golf players or golf maniacs to learn desirable iron swing motions. This study compared and analyzed the swing motions of iron clubs(3, 6, 9) by using 3-D in three elite golf players. 1. There was no a great difference in the total of swing time by club and the time by phase was nearly similar. 2. There was no a difference in the change in a head location at address and impact by club. 3. The angle change in a right knee joint was similar by club except the difference according to the length of the club. 4. There was a subtle difference in hip rotation angle by club. 5. In each club, the same rotation angle of shoulder joint at address and impact motions contributed to accurate swing, and the maintenance of more than $90^{\circ}$ of shoulder rotation angle in top swing increased swing rotation. 6. Although subtle, the forward angle of upper body was increased with a shorter club. $30-36^{\circ}$ of forward angle of upper body was maintained at address, top swing, and impact motions.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.95-104
• /
• 2005

To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.287-296
• /
• 2009

This is written to present basic shot information among iron clubs and information of weight shift, because previous study conducted on all clubs was rut enough. This article is about shot analysis of iron club 3,4,5,6,7,8,9 and weight movement, conducted on four skilled golf players and four students who major in golf and are less than three years. The analysis of long and short irons showed statistically meaningful different results for all the participants but iron clubs of 3,4,5 didn't in head speed and ball speed. The skilled group showed better results in head speed, ball speed and direction, Launch angle than the unskilled group. In weight shift movement analysis, the unskilled group moved, on back swing top, their more weight(65.36%) but the skilled group was on their left foot (70.21%)when clubs were on impact moment. It shows that the skilled group put on power more efficiently by moving weight.

• The Journal of Natural Sciences
• /
• v.14 no.2
• /
• pp.1-14
• /
• 2004

The observation of the various swing parameters and its effect on golfer swing are tatally analyzed. The golf ball impact and flies away, therefore it must be controlled bofore ball impact. The purpose of this paper is that the cause of hook and slice are found and the posture of swing is corrected. The trajectory after ball impact is on the $\Delta$-plane, which is consisted of the normal vector on club face and the swing velocity vector of club head including the initial celocity and the spin axis after ball imfact. In order to correct the miss shot in golf swing, this paper is is shown that the theoretical review and study is discussed to use the D-plane and $\Delta$-plane.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.28-32
• /
• 1995

The presteamed or prefrozen persimmon blocks of 10cm ${\times}$ 10cm ${\times}$ 15cm were air-dried at room temperature until about 30% moisture content, and then were dried in a MW oven. During drying their internal temperatures were monitored with thermo-couple probes. The presteamed and prefrozen blocks didn't show any improvement in drying rate and moisture gradient when compared with the controls. Checks appeared on the surfaces of most presteamed blocks during air-drying. It has been clearly revealed that the maximum weight, loss must, be less than 2g/min during MW drying to prevent internal checking and that MW drying reduced moisture gradients inside blocks. MW dried the persimmon blocks 440 times faster than conventional kiln.

• Journal of Korea Foundry Society
• /
• v.23 no.3
• /
• pp.114-121
• /
• 2003

• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.317-325
• /
• 2011

The purpose of this study was to investigate the contributions of body joints to the kinetic energy of the clubhead in the golf swing. Three dimensional swing analysis was conducted on the seven KPGA golfers. The subjects were asked to swing with 45 inches of driver. The work done by body joints were computed by utilizing the inverse dynamics method. The order of work done by the body joints was lumbar > left hip > right shoulder > left wrist > right wrist > right hip at the first phase. At the second phase, the order of work done by the body joints was trunk > left elbow > right wrist > right shoulder > left wrist > right wrist. At the third phase, the order of work done by body joints was lumbar > right shoulder > left shoulder > left elbow > right wrist > right elbow. The sum of the work done by the body joints was lumbar > shoulder > wrist on the average. The kinetic energy of the club head was 430.11${\pm}$24.35 J and the subject's swing efficiency was shown as 31.82${\pm}$4.86% on the average. The contributions of body joints to the kinetic energy of the clubhead was the order of lumbar > upper right shoulder > left elbow > right wrist during the down swing.