• 제목/요약/키워드: Goal distributions

검색결과 72건 처리시간 0.024초

Effect of Wall Thickness on Thermal Behaviors of RC Walls Under Fire Conditions

  • Kang, Jiyeon;Yoon, Hyunah;Kim, Woosuk;Kodur, Venkatesh;Shin, Yeongsoo;Kim, Heesun
    • International Journal of Concrete Structures and Materials
    • /
    • 제10권sup3호
    • /
    • pp.19-31
    • /
    • 2016
  • The objective of this paper is to investigate the effect of thickness and moisture on temperature distributions of reinforced concrete walls under fire conditions. Toward this goal, the first three wall specimens having different thicknesses are heated for 2 h according to ISO standard heating curve and the temperature distribution through the wall thickness is measured. Since the thermal behavior of the tested walls is influenced by thickness, as well as moisture content, three additional walls are prepared and preheated to reduce moisture content and then tested under fire exposure. The experimental results clearly show the temperatures measured close to the fire exposed surface of the thickest wall with 250 mm thickness is the highest in the temperatures measured at the same location of the thinner wall with 150 mm thickness because of the moisture clog that is formed inside the wall with 250 mm of thickness. This prevents heat being transferred to the opposite side of the heated surface. This is also confirmed by the thermal behavior of the preheated walls, showing that the temperature is well distributed in the preheated walls as compared to that in non-preheated walls. Finite element models including moisture clog zone are generated to simulate fire tests with consideration of moisture clog effect. The temperature distributions of the models predicted from the transient heat analyses are compared with experimental results and show good agreements. In addition, parametric studies are performed with various moisture contents in order to investigate effect of moisture contents on the thermal behaviors of the concrete walls.

Nutritional intake of Korean population before and after adjusting for within-individual variations: 2001 Korean National Health and Nutrition Survey Data

  • Kim, Dong-Woo;Shim, Jae-Eun;Paik, Hee-Young;Song, Won-O;Joung, Hyo-Jee
    • Nutrition Research and Practice
    • /
    • 제5권3호
    • /
    • pp.266-274
    • /
    • 2011
  • Accurate assessment of nutrient adequacy of a population should be based on usual intake distribution of that population. This study was conducted to adjust usual nutrient intake distributions of a single 24-hour recall in 2001 Korean National Health and Nutrition Surveys (KNHNS) in order to determine the magnitude of limitations inherent to a single 24-hour recall in assessing nutrient intakes of a population. Of 9,960 individuals who provided one 24-hour recall in 2001 KNHNS, 3,976 subjects provided an additional one-day 24-hour recall in 2002 Korean National Nutrition Survey by Season (KNNSS). To adjust for usual intake distribution, we estimated within-individual variations derived from 2001 KNHNS and 2002 KNNSS using the Iowa State University method. Nutritionally at risk population was assessed in reference to the Dietary Reference Intakes for Koreans (KDRIs). The Korean Estimated Average Requirement (Korean EAR) cut-point was applied to estimate the prevalence of inadequate nutrient intakes except for iron intakes, which were assessed using the probability approach. The estimated proportions below Korean EAR for calcium, riboflavin, and iron were 73%, 41%, and 24% from usual intake distribution and 70%, 51%, and 39% from one-day intake distribution, respectively. The estimated proportion of sodium intakes over the Intake Goal of 2,000 mg/day was 100% of the population after adjustment. The energy proportion from protein was within Korean Acceptable Macronutrient Distribution Ranges (Korean AMDR), whereas that of carbohydrate was higher than the upper limit and that of fat was below the lower limit in the subjects aged 30 years or older. According to these results, the prevalence of nutritional inadequacy and excess intake is over-estimated in Korea unless usual intake distributions are adjusted for one-day intakes of most nutrients.

Influence of porosity distribution on vibration analysis of GPLs-reinforcement sectorial plate

  • Jia, Anqiang;Liu, Haiyan;Ren, Lijian;Yun, Yingxia;Tahouneh, Vahid
    • Steel and Composite Structures
    • /
    • 제35권1호
    • /
    • pp.111-127
    • /
    • 2020
  • The goal of this study is to fill this apparent gap in the area about investigating the effect of porosity distributions on vibrational behavior of FG sectorial plates resting on a two-parameter elastic foundation. The response of the elastic medium is formulated by the Winkler/Pasternak model. The internal pores and graphene platelets (GPLs) are distributed in the matrix either uniformly or non-uniformly according to three different patterns. The model is proposed with material parameters varying in the thickness of plate to achieve graded distributions in both porosity and nanofillers. The elastic modulus of the nanocomposite is obtained by using Halpin-Tsai micromechanics model. The annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. The 2-D differential quadrature method as an efficient and accurate numerical approach is used to discretize the governing equations and to implement the boundary conditions. The convergence of the method is demonstrated and to validate the results, comparisons are made between the present results and those reported by well-known references for special cases treated before, have confirmed accuracy and efficiency of the present approach. It is observed that the maximum vibration frequency obtained in the case of symmetric porosity and GPL distribution, while the minimum vibration frequency is obtained using uniform porosity distribution. Results show that for better understanding of mechanical behavior of nanocomposite plates, it is crucial to consider porosities inside the material structure.

A Study of Globular Cluster Systems in the Coma, Fornax, and Virgo Clusters of Galaxies from HST ACS and WFC3/IR Imaging

  • Cho, Hyejeon
    • 천문학회보
    • /
    • 제42권1호
    • /
    • pp.29.1-29.1
    • /
    • 2017
  • I present new near-infrared (NIR) photometry of globular cluster (GC) systems associated to a cD galaxy NGC 4874 in the core of the Coma cluster and 16 early-type galaxies in the Fornax and Virgo clusters of galaxies using the Infrared Channel of the Wide Field Camera 3 (WFC3/IR) on board the Hubble Space Telescope (HST). Combining these high-resolution NIR data with new HST Advanced Camera for Surveys (ACS) optical photometry for NGC 4874 and existing ACS GC catalogs from the ACS Fornax and Virgo Cluster Surveys, I have examined for the first time the GC systems in a statistically significant optical/NIR sample of galaxies spanning a wide range of luminosities and colors. A primary goal of this study is to explore empirically whether the distributions of purely optical and hybrid optical - NIR color indices for extragalactic GCs have different forms and whether the relations between these color indices are nonlinear, indicating that they behave differently with underlying metallicity. I find that some GC systems of large galaxies in our sample show color bimodalities that differ between the optical and optical - NIR colors, in the sense that they have disparate ratios of "blue" and "red" peak GCs, as well as differing ratios in their color dispersions. Consistent with these results, I find empirically that the dependence of hybrid optical-NIR color on purely optical color is nonlinear, with an inflection at intermediate metallicities. These findings underscore the importance of understanding the nature of galaxy-to-galaxy variations in the GC color distributions and color-color relations, as well as the exact forms of the color-metallicity transformations, in interpreting the observational data on GC color bimodality. Our ACS data for NGC 4874 shows that its GC system exhibits a very strong blue tilt, implying a very steep mass-metallicity scaling, and the centroid of this GC system is offset by $4{\pm}1kpc$ from the luminosity center of NGC 4874, in the direction of NGC 4872. Finally, I discuss the asymmetrical GC distribution around a dwarf elliptical galaxy in Coma that has a very high relative velocity with respect to the cluster mean at small clustercentric radius.

  • PDF

Statistical Study and Prediction of Variability of Erythemal Ultraviolet Irradiance Solar Values in Valencia, Spain

  • Gurrea, Gonzalo;Blanca-Gimenez, Vicente;Perez, Vicente;Serrano, Maria-Antonia;Moreno, Juan-Carlos
    • Asia-Pacific Journal of Atmospheric Sciences
    • /
    • 제54권4호
    • /
    • pp.599-610
    • /
    • 2018
  • The goal of this study was to statistically analyse the variability of global irradiance and ultraviolet erythemal (UVER) irradiance and their interrelationships with global and UVER irradiance, global clearness indices and ozone. A prediction of short-term UVER solar irradiance values was also obtained. Extreme values of UVER irradiance were included in the data set, as well as a time series of ultraviolet irradiance variability (UIV). The study period was from 2005 to 2014 and approximately 250,000 readings were taken at 5-min intervals. The effect of the clearness indices on global irradiance variability (GIV) and UIV was also recorded and bi-dimensional distributions were used to gather information on the two measured variables. With regard to daily GIV and UIV, it is also shown that for global clearness index ($k_t$) values lower than 0.6 both global and UVER irradiance had greater variability and that UIVon cloud-free days ($k_t$ higher than 0.65) exceeds GIV. To study the dependence between UIVand GIV the ${\chi}^2$ statistical method was used. It can be concluded that there is a 95% probability of a clear dependency between the variabilities. A connection between high $k_t$ (corresponding to cloudless days) and low variabilities was found in the analysis of bidimensional distributions. Extreme values of UVER irradiance were also analyzed and it was possible to calculate the probable future values of UVER irradiance by extrapolating the values of the adjustment curve obtained from the Gumbel distribution.

스폰지 뼈의 Remodeling 예측을 위한 체적 변형률을 이용한 유한요소 알고리즘 (A Finite Element Simulation of Cancellous Bone Remodeling Based on Volumetric Strain)

  • 김용;벤더비 레이
    • 대한의용생체공학회:의공학회지
    • /
    • 제21권4호
    • /
    • pp.373-384
    • /
    • 2000
  • 본 연구의 목적은 체적 변형률 (volumetric strain)에 의한 스폰지 뼈의 밀도를 예측하는 것이다. 스폰지 뼈의 내부에서 유체의 흐름을 고려하기 위하여 각각의 normal strain의 합을 체적 변형률로 정의하였다. 체적 변형률의 경계조건에 대한 민감한 반응은 스폰지 뼈의 밀도를 예측하도록 하였다. 이러한 이론적 배경을 유한요소법 (finite element method)에 적용시켜 대퇴골 (femur)과 척구 (spine)의 스폰지 뼈에서의 밀도를 예측하였다. 예측된 뼈의 밀도는 실험적 데이터와 매우 유사하였다. (Wolff 1892, Keller et al. 1989, Codyet al. 1992). 뼈의 밀도의 함수인 뼈의 탄성계수와 강도 또한 실험적 결과와 매우 유사하였다. (Keller et al. 1989, Carter and Hayes 1977). 본 연구에서 정립된 알고리즘은 스폰지 뼈의 밀도를 예측하는데 있어서 수렴성과 민감성이 우수하였다. 따라서 본 연구의 컴퓨터 알고리즘은 스폰지 뼈의 밀도예측에 있어서 매우 유용한 방법이 될 것이다.

  • PDF

COMPARISON OF SPECKLE REDUCTION METHODS FOR MULTISOURCE LAND-COVER CLASSIFICATION BY NEURAL NETWORK : A CASE STUDY IN THE SOUTH COAST OF KOREA

  • Ryu, Joo-Hyung;Won, Joong-Sun;Kim, Sang-Wan
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.144-147
    • /
    • 1999
  • The objective of this study is to quantitatively evaluate the effects of various SAR speckle reduction methods for multisource land-cover classification by backpropagation neural network, especially over the coastal region. The land-cover classification using neural network has an advantage over conventional statistical approaches in that it is distribution-free and no prior knowledge of the statistical distributions of the classes is needed. The goal of multisource land-cover classification acquired by different sensors is to reduce the classification error, and consequently SAR can be utilized an complementary tool to optical sensors. SAR speckle is, however, an serious limiting factor when it is exploited for land-cover classification. In order to reduce this problem. we test various speckle methods including Frost, Median, Kuan and EPOS. Interpreting the weights about training pixel samples, the “Importance Value” of each SAR images that reduced speckle can be estimated based on its contribution to the classification. In this study, the “Importance Value” is used as a criterion of the effectiveness.

  • PDF

A study on competition of hinterland in Zhejiang Province between Shanghai Port and Ningbo Port

  • Li, Jia-Bin;Lee, Su-Ho
    • 한국항해항만학회지
    • /
    • 제34권7호
    • /
    • pp.567-575
    • /
    • 2010
  • Ningbo Port develops quickly in recent years and with the combination of Ningbo Port and Zhoushan Port, it becomes another important port in the Shanghai International Shipping center. Competition between the two biggest ports in this area can't be avoided. The goal of this paper is investigating the competence of port from two angles, which are spatial structure of the ports cluster and neighboring ports' attraction to cargoes at conjunct hinterlands. The paper firstly uses the HHI index model and shift-share method to qualitatively and quantitatively analyze the data of container throughputs of ports in the shipping center, in order that investigates the spatial structure of ports cluster. Basing on above researches, the paper employs the location quotient to study Shanghai port and Ningbo port's hinterland distributions at Zhejiang province. The conclusion of this study:(I)the ports cluster of the Shanghai International Shipping Center is highly centralized, and undergoes a porcess of first centralization then decentralization since the mid of 90s, last century. (2)Hinterlands of Shanghai port includes: Hangzhou, Jiaxing, Huzhou and Quzhou districts; Hinterlands of Ningbo port includes: Ningbo, Taizhou and Zhoushan districts.

Unsteady Conjugate Heat Transfer Analysis of a Cooled Turbine Nozzle with High Free Stream Turbulence

  • Seo, Doyoung;Hwang, Sunwoo;Son, Changmin;Kim, Kuisoon
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제18권2호
    • /
    • pp.279-289
    • /
    • 2017
  • In this study, a series of conjugate heat transfer (CHT) analyses are conducted for a stage of a fully cooled high-pressure turbine (HPT) at elevated levels of free stream turbulence (Tu = 5% and 25.7%). The goal of the analyses is to investigate the influence of high turbulence intensity on the fluid-thermal characteristics of a nozzle guide vane (NGV). The turbine inlet temperature is defined by considering a typical radial temperature distribution factor (RTDF). The Unsteady Reynolds Average Navier-Stokes (URANS) CHT simulations are carried out using CFX 15.0, a commercial CFD package. The presented CFD modeling approach for high turbulence intensity is verified with the experimental data from two types of NASA C3X NGVs with films. The computation grid is generated for both the fluid and solid domains. The fluid domain grid is created using a tetrahedral grid system with prism layers because of its complex geometry, and the solid domain grid is composed of only tetrahedral elements. The analytical results are compared to understand the effect of turbulence on flow characteristics and metal temperature distributions. The results obtained in this study provide useful insights on the effects of high free stream turbulence and unsteadiness. The results also lead to the proposal of meaningful turbine design guidelines.

경면수정 ADE 반사경 안테나의 설계 및 그 특성 (Design and Characteristics of Shaped ADE Reflector Antennas)

  • 최학근
    • 한국전자파학회논문지
    • /
    • 제10권1호
    • /
    • pp.122-132
    • /
    • 1999
  • 본 논문에서는 37~40 GHz 대의 직경 30 cm의 소형 경면수정 ADE 반사경 안테나를 설계 제작하고 복사 특성을 고찰하였다 안테나 설계시 개구면 전계분포는 균일분포와 포물분포가 결합된 전계분포로 가정하고 빔폭, 개구연효율, 사이드로브 레벨 특성의 변화를 고찰하고 이것을 설계에 이용할 수 있도록 하였다. 설계 제작된 안테나의 이득과 사이드로브 레벨은 40 GHz에서 39.9 dBi(효율 : 61.9 %)와 -18.8 dB로 측정되었다. 이는 설계시 목표했던 효율 60 % 이상, 사이드로브 레벨 -20 dB 이하에 근접한 것으로 나타났다.

  • PDF