• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.359-364
• /
• 2003

In this paper, we present multi-sensor data fusion for telematics application. Successful telematics can be realized through the integration of navigation and spatial information. The well-determined acquisition of vehicle's position plays a vital role in application service. The development of GPS is used to provide the navigation data, but the performance is limited in areas where poor satellite visibility environment exists. Hence, multi-sensor fusion including IMU (Inertial Measurement Unit), GPS(Global Positioning System), and DMI (Distance Measurement Indicator) is required to provide the vehicle's position to service provider and driver behind the wheel. The multi-sensor fusion is implemented via algorithm based on Kalman filtering technique. Navigation accuracy can be enhanced using this filtering approach. For the verification of fusion approach, land vehicle test was performed and the results were discussed. Results showed that the horizontal position errors were suppressed around 1 meter level accuracy under simulated non-GPS availability environment. Under normal GPS environment, the horizontal position errors were under 40㎝ in curve trajectory and 27㎝ in linear trajectory, which are definitely depending on vehicular dynamics.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.555-561
• /
• 2014

Data processing service via internet help user to get the GNSS data processing result more precise and easily. Thus, online data process system is operated and developed by various research groups and national. But this service is difficult to use in domestic cadastral survey. In this study, we developed the online data processing system for a domestic cadastral survey. This is calculated coordinate using NGII CORS(SUWN) fiducially. And use PPP technique by GIPSY-OASIS. If user choose the observation data which want to calculate the coordinate, then is uploaded to GIPSY-OASIS server through FTP. After upload is complete, server automatically calculate coordinate, and send the report about result using e-mail. And it takes 2 minutes runtime on the basis of the 3 sessions. To verify the result, we used the data on SOUL, JUNJ as compared with notified-coordinate from NGII. As a result, got the difference for east-west 1.4 cm, north-south -1.0 cm, vertical 0.5 cm.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.4
• /
• pp.131-141
• /
• 2014

Over the last decade, the Global Navigation Satellite System (GNSS) has been increasingly utilized as a meteorological research tool. The Korea Astronomy and Space Science Institute (KASI) has also been developing a near real-time GNSS precipitable water vapor (PWV) information management system that can produce a precise PWV for the Korean Peninsula region using GNSS data processing and meteorological measurements. The goal of this paper is to evaluate whether the precise point positioning (PPP) strategy will be used as the new data processing strategy of the GNSS-PWV information management system. For this purpose, quality assessment has been performed by means of a comparative analysis of the troposphere zenith total delay (ZTD) estimates from KASI PPP solutions (KPS), KASI network solutions (KNS), and International GNSS Service (IGS) final troposphere products (IFTP) for ten permanent GNSS stations in the Korean Peninsula. The assessment consists largely of two steps: First, the troposphere ZTD of the KNS are compared to those of the IFTP for only DAEJ and SUWN, in which the IFTP are used as the reference. Second, the KPS are compared to the KNS for all ten GNSS stations. In this step, the KNS are used as a new reference rather than the IFTP, because it was proved in the previous step that the KNS can be a suitable reference. As a result, it was found that the ZTD values from both the KPS and the KNS followed the same overall pattern, with an RMS of 5.36 mm. When the average RMS was converted into an error of GNSS-PWV by considering the typical ratio of zenith wet delay and PWV, the GNSS-PWV error met the requirement for PWV accuracy in this application. Therefore, the PPP strategy can be used as a new data processing strategy in the near real-time GNSS-PWV information management system.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.1
• /
• pp.39-61
• /
• 1994

GMDSS(the Global Maritime Distress and Safety System), which is utilizing recently developed systems such as satellite communications and positioning system, digital communication system, computer and microelectronics technology, etc., has been adopted by International Maritime Orgnization(IMO) and coordina-ted with such organization as the International Telecommunication Union(ITU), World Meteorological Organizatoion(WMO), etc. This system took effect partly on February 1st 1992 according to the 1988 SOLAS Amemdments and, after some more complementary measures, will be fully operational by February 1st 1999. Comparing with the existing communication system, the new system is mainly based on the latest scientific technologies, and therefore overall countermeasure will be necessary to accept the system reasonably. GMDSS will transform the current communication system basically and be the major factor to change the demand and supply of personnel for radio communication. To cope with the system assertively, regulations relating to the radio installation, the posting of radio operators, the bounds of their duty, etc. must be established and the demand and supply of radio operators to meet the system must be accomplished pertinently. Moreover, the technique and quality of the person-nel responsible for the system must be upgraded to carry out the obligations by international regulations as well as to ensure the safety of life and property at sea. Looking into the actual situations of our country, every regulation relating to the GMDSS has been improved, but the concerned educational institutions and administrations have not yet prepared the rational and concrete schemes on the educational methods and adquate procedures for the system. Therefore, in this thesis, the author intends to propose directions for improving the courses and contents of education of the relating educational institutions and to suggest rational schemes for balancing the demand and supply of personnel to the administrative anthorty concerned.

• Ocean Systems Engineering
• /
• v.14 no.2
• /
• pp.101-114
• /
• 2024

Seafloor sediment mapping is an essential research topic in shallow coastal waters, especially in port development, benthic habitat mapping, and underwater communications. The seafloor sediments can be interpreted by collecting sediment samples directly in the field using a grab sampler or corer. Another method is optical, especially using underwater cameras and videos. Both methods each have weaknesses in terms of area coverage (mechanic) and accurate positioning (optic). The latest technology used to overcome it is the acoustic method (echosounder) with Global Navigation Satellite System (GNSS) Real Time Kinematic (RTK) positioning. Therefore, in this study will propose the classification of seafloor sediments in coastal waters using acoustic method that is Multibeam Echosounder (MBES) multi-frequency with five frequency (200 kHz, 250 kHz, 300 kHz, 350 kHz, and 400 kHz). In this study, the deep neural network (DNN) used the bathymetric multi frequency, bathymetric difference inters frequencies, and bathymetric features from 5 (five) frequencies as input layer and 4 (four) sediment types in 74 (seventy-four) sample sediment as output layer to make a seafloor sediment map. Results of sediment mapping using the DNN method show an overall accuracy of 71.6% (significant) and a kappa coefficient of 0.59 (moderate). The distribution of seafloor sediment in the study area is mainly silt (41.6%), followed by clayey sand (36.6%), sandy silt (14.2%), and silty sand (7.5%).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.245-254
• /
• 2018

Impact of tropospheric correction techniques on accuracy of the GPS (Global Positioning System) derived ellipsoidal heights has been experimentally assessed in this paper. To this end, 247 baselines were constructed from a total of 88 CORS (Continuously Operating Reference Stations) in Korea. The GPS measurements for seven days, acquired from the so-called integrated GNSS (Global Navigation Satellite Systems) data center via internet connection, have been processed by two baseline processing software packages with an application of the empirical models, such as Hopfield, modified Hopfield and Saastamoinen, and the estimation techniques based on the DD (Double-Differenced) measurements and the PPP (Precise Point Positioning) technique; hence a total number of the baseline processed and tested was 8,645. Accuracy and precision of the estimated heights from the various correction schemes were analyzed about baseline lengths and height differences of the testing baselines. Details of these results are summarized with a view to hopefully providing an overall guideline of a suitable selection of the modeling scheme with respect to processing conditions, such as the baseline length and the height differences.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7424-7429
• /
• 2014

GPS (Global Positioning System) is currently used widely in the ground section, such as surveying, mapping, geodesy, geophysics, the aviation section, such as aerial navigation and aerial photography, the sea section, including ship navigation and bathymetry, and space section, such as the satellite orbit and Earth's orbit. On the other hand, its use is limited due to the professional knowledge and expense to process the data for precise analysis. As a result, a web-based data processing solution for precise point positioning using GPS data was developed by c# for non-specialized people to process easily. In addition, the crustal movement speed of Korea after an earthquake was calculated to be an average of 30mm/year for each CORS, suggesting that it is possible to monitor crustal movement.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.465-472
• /
• 2015

In order to improve the performance of TCAS it should improve the performance of the sensor, which transmits a variety of information. In this paper, To improve the performance of the existing radar sensors such as being used in behalf of the next generation air traffic control system, ads-b the applied. In addition, ADS-B in a high precision by using information from the correction GPS system, SBAS assume would be able to apply an improved location accuracy for TCAS and analyzed TCAS and ADS-B. Played the simulation results, TCAS equipment receives the help of these ADS-B can calculate a CPA to determine the position of the aircraft in advance, and it was confirmed that it is possible to reduce the unnecessary RA operation, also, the pilot reduction and the workload, it has advantages such as fuel consumption and time associated with the reduced operation unnecessary RA was confirmed.

• Journal of Korean Port Research
• /
• v.14 no.2
• /
• pp.209-217
• /
• 2000

This study is to develop the technology and the ways of the practical use of the integrated digital map of and Electronical Navigational Chart(ENC) and Digital Terrain Map(DTM) for the effective and scientific based conservation, development and management. In this study, as preliminary studies to make eventual integrated maps, the concept of coastal areas are defined and the characteristics of digital maps developed by Korean Geography Institute and National Marine Investigation Institute are carefully analyzed. A test coastal map was developed based on the integrated digital map, a high resolution satellite image and Global Positioning System. Results from the edge matching analysis of coastal lines shows 8 meters difference in maximum. The problems, causes and solutions for the edge matched differences are described. Furthermore, the practical value of utilization, future use and various field of application are described based on the integrated digital map data base of coastal area.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.305-316
• /
• 2022

Numerous research revealed a strong association between the ionospheric perturbations and various natural hazards. The ionospheric measurements from Global Navigation Satellite System (GNSS) observations provide the state of electron contents in the ionosphere that contributes to investigate the source events. In this study, two geophysical events occurred on 23 January 2018, the 7.9 Mw earthquake in Alaska and Kusatsu-Shiranesan volcanic eruption in Japan, are examined to characterize the fingerprint of each event in the ionosphere. Firstly, we extracted the Total Electron Content (TEC) from GNSS measurements, then isolated disturbed wave signatures from the TEC measurements that is referred to as a traveling ionospheric disturbance (TID). As TIDs are short-term ionospheric variations, the major trend of GNSS TEC measurements should be properly removed. We applied a natural neighbor interpolation method together with a leave-one-out cross validation technique for detrending. After detrending the TEC, the remaining signals are further enhanced by applying a band-pass filter and TIDs are detected from them. Finally, the detected TIDs are verified as the response of the ionosphere to Kusatsu-Shiranesan volcanic eruption and Gulf of Alaska earthquake which propagated through the ionosphere with an average velocity of 530 m/s and 724 m/s, respectively. In addition, a coherence analysis is conducted to discriminate between the signatures from a volcanic explosion and an earthquake. The analysis reveals the TID waveforms from each single event are highly correlated, while a low correlation is found between the TIDs from the earthquake and explosion. This study supports the claim that different geophysical events induce the distinctive characteristics of TIDs that are detectable by the ionospheric measurements of GNSS.