• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.119-128
• /
• 2014

Computing the natural-looking interpolation of different shapes is a fundamental problem of computer graphics. It is proved by some researchers that such an interpolation can be achieved by pursuing the isometry. In this paper, a novel coordinate system that is invariant under isometries is defined. The coordinate system can easily be converted from the global vertex coordinates. Furthermore, the global coordinates can be efficiently recovered from the new coordinates by simply solving two sparse least-squares problems. Since the proposed coordinate system is invariant under isometries, then transformations such as global rigid trans-formations, articulated posture deformations, or any other isometric deformations, do not change the coordinate values. Therefore, shape interpolation can be done in this framework without being affected by the distortions caused by the isometry.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4228-4233
• /
• 2010

본 연구에서는 통일원점 지역 중 중부원점과 동부원점이 접하는 지역에서의 지적기준점의 위치정확도를 분석하여 봄으로써 향후 세계좌표변환시 지적 원점계열 상이 지역에서의 세계좌표계 변환의 가능성을 제시하여 보고자 하였다. 연구결과, 실험지역의 지적삼각점 총 12점의 GPS 관측 데이터를 추출하여 중부원점과 동부원점이 접하는 지역에서의 좌표변환의 정확도를 분석한 결과 X좌표의 RMSE는 ${\pm}0.0014m$, Y좌표의 RMSE는 ${\pm}0.0011m$로 매우 양호한 성과가 산출되어 세계좌표로의 변환이 가능한 것으로 분석되었다. 따라서 세계좌표로 변환에 있어 다양한 주변 삼각점에 대한 성과의 점검을 통하여 우선적으로 성과가 안정적인 점을 먼저 선별한 후 이점 들을 최대한 활용하여 세계좌표로의 변환을 시행한다면 원점 접경 지역에서도 좌표변환이 가능할 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.846-851
• /
• 2004

In this paper, we propose a global ultrasonic system for the self-localization and autonomous navigation of indoor mobile robots. The ultrasonic sensor is regarded as the most cost-effective ranging system among the possible alternatives, and it is widely used for general purpose, since it requires simple electronic drivers and has relatively high accuracy. The global ultrasonic system presented in this paper consists of four or more ultrasonic generators fixed at reference positions in the global coordinates of an indoor environment and two receivers mounted on the mobile robots. By using the RF (Radio Frequency) modules added to the ultrasonic sensors, the robot is able to control the ultrasonic generation and to obtain the critical distances from the reference positions, which are required in order to localize is position in the global coordinates. A kalman filter algorithm designed for the self-localization using the global ultrasonic system and the experimental results of the autonomous navigation are presented in this paper.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.228-235
• /
• 2012

It is very important to analyze effectively the tolerance of an optical system with high resolution as the projection lens of photolithography or as the objective lens of a microscope. We would like to find an effective assembly structure and compensators to correct aberrations through global wavefront sensitivity analysis using Zernike polynomial expansion from the field and pupil coordinates rather than from only pupil coordinates. In this paper, we introduce global wavefront coefficients by small perturbations of the optical system, and analyze the optical performance with these coefficients. From this analysis, it is possible to see how we can enlarge the tolerance through the proper assembly structure and compensators.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.712-719
• /
• 2006

This paper is concerned with the comparison of substructure synthesis methods based on global and local coordinates. The substructure synthesis methods based on the global coordinates were first proposed for the dynamic analysis of complex structure and the substructure synthesis method based on the local coordinates was proposed to solve the dynamic problem of tree-like structure. However, the conceptual difference between two methods in solving the dynamic problem has never been explained. In this paper, a structure consisting of two beams is considered to show the conceptual difference of two methods. The dynamic formulation shows the characteristics and differences of two methods explicitly. The procedure for choosing proper substructure modes in each method is also explained in detail. In addition, the advantage of the substructure synthesis method based on the local coordinate system is discussed based on the numerical example. Numerical examples show how two methods are applied to the addressed problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.926-930
• /
• 1993

An efficient method of formulating the equations of motion of multibody systems is presented. The equations of motion for each body are formulated by using Newton-Eulerian approach in their generic form. And then a transformation matrix which relates the global coordinates and relative coordinates is introduced to rewrite the equations of motion in terms of relative coordinates. When appropriate set of kinematic constraints equations in terms of relative coordinates is provided, the resulting differential and algebraic equations are obtained in a suitable form for computer implementation. The system geometry or topology is effectively described by using the path matrix and reference body operator.

• 한국측량학회지
• /
• 제15권2호
• /
• pp.269-275
• /
• 1997

GPS(Global Positioning System)측량을 이용한 차량항법시스템은 인공위성으로부터 전파신호를 받아 차량내부의 수치지도가 내장된 모니터에 차량의 현재 위치 및 진행방향을 표시, 목적지까지의 최단거리 주행로 등을 알려주게 된다 이 수치지도상에 차량의 위치를 표시하기 위해서는 차량에 탑재된 GPS수신기가 위성으로부터 WGS84좌표 계에 의한 경위도 데이터를 수신하여 이를 Bessel좌표계로 변환한 후 다시 TM투영과정을 거쳐 화면상에 나타나게된다. 본 연구에서는 지형도를 디지타이징하여 제작한 수치지도와 GPS장비를 자동차에 탑재하여 획득한 자료를 분석하여 제작한 수치지도를 비교하므로서 WGS84좌표계에 의한 수치지도 제작기법에 대해 고찰하고자 한다.

• 대한공간정보학회지
• /
• 제18권3호
• /
• pp.105-114
• /
• 2010

본 연구에서는 지적좌표체계의 세계좌표체계로의 변환 실험연구를 통하여 위치 및 면적의 변화량과 이로 파생되는 문제점들을 검토 분석하였다. 그리고 이를 기초로 개선점을 모색하여 보고자 하였다. 연구지역의 좌표변환 결과, 모든 필지경계점(총 478점)에 대한 좌표변환의 표준편차가 X=0.0079m, Y=0.0153m로 나타나 매우 양호하게 산출되었다. 면적의 차이량을 분석한 결과, 평균적으로 0.062$m^2$정도의 차이를 보여, 이는 현행 법률에서 규정하고 있는 면적허용오차 이내인 것으로 나타났다. 따라서 연구대상지역에 한정하여 본다면 위치나 면적부분에서 많은 차이를 보이지 않아 세계좌표계로의 전환이 가능한 것으로 나타났다.

• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.62-76
• /
• 2002

This paper describes the design of a Coordinates Tracking algorithm for EOTS and its error analysis. EOTS stabilizes the image sensors such as FLIR, CCD TV camera, LRF/LD, and so on, tracks targets automatically, and provides navigation capability for vehicles. The Coordinates Tracking algorithm calculates the azimuth and the elevation angle of EOTS using the inertial navigation system and the attitude sensors of the vehicle, so that LOS designates the target coordinates which is generated by a Radar or an operator. In the error analysis in this paper, the unexpected behaviors of EOTS that is due to the time delay and deadbeat of the digital signals of the vehicle equipments are anticipated and the countermeasures are suggested. This algorithm is verified and the error analysis is confirmed through simulations. The application of this algorithm to EOTS will improve the operational capability by reducing the time which is required to find the target and support especially the flight in a night time flight and the poor weather condition.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.327-332
• /
• 2022

The Korea Augmentation Satellite System (KASS) is the Satellite-Based Augmentation System (SBAS) under development in Korea. KASS navigation service support navigation Safety of Life (SoL) service. KASS signal provides corrections to Global Positioning System (GPS) data received from KASS Reference Stations (KRS) and is broadcast form Geostationary Earth Orbiting (GEO) satellites to KASS users and is used by GPS/SBAS user equipment to improve the accuracy, availability, continuity and integrity of the navigation solution. Seven KRS's collect the satellite data and send them to the KASS Processing Stations (KPS) for the generation of the corrections and the monitoring the integrity. For performing its computation the KPS needs to know accurate and reliable KRS antennas coordinates. These coordinates are provided as configuration parameters to the KPS. This means that the reference frame in which the KPS work is the one represented by the set of coordinates provided as input. Therefore, the activity to maintain the accuracy of the KRS antenna coordinates is necessary, knowing that coordinates can evolve due to earth plates movements or earthquakes. In this paper, we analyzed the geodetic survey results for KRS antenna coordinates from Site Acceptance Test (SAT) #1 in December 2020 to August 2022. In the future, it is expected that these activities and planning for KRS coordinates maintenance will be produced and provided to KASS system operators for KPS configuration updates during the KASS lifetime of 15 years. Through these maintenance activities, it is expected that monitoring and analysis of unpredictable events such as earthquakes and seism will be possible in the future.