• KIEAE Journal
• /
• 제13권2호
• /
• pp.39-46
• /
• 2013

Recently, the field of construction is putting a variety of effort into reducing CO2, since global warming is being accelerated due to climate changes and the increase of greenhouse gas. For reduction of CO2 in the field of construction, it is required to make plans to cut down heating energy of buildings and especially, it is urgently needed to cut down energy of residential buildings in rural area where occupies the majority of consumption of petroleum-based energy sources. Therefore, this research compared and analyzed the actual energy consumption, by evaluating energy performance of a detached house applying passive house design components for reduction of energy. As the result, energy consumption showed remarkable differences, according to the operation of a heat recovery ventilation unit which is one of passive house design components, and building energy consumption displayed remarkable differences, too, depending on the difference of airtightness performance during building energy simulation conducted in process of design. Based on these results, the importance of airtightness performance of passive house was verified. The result of the actual measurement of energy consumption demonstrated that LNG was most economical amongst several heat resources yielded, on the basis of LPG source energy consumption measured within a certain period of time, and it was followed by kerosene. LPG was analyzed to have a low economic efficiency, when used for heating.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.358-363
• /
• 2017

직격 요격체를 탑재한 대공 방어체계에서 요격 확률을 높이기 위해서는 이를 구성하는 탐지 및 추적 시스템으로부터 유도탄까지 매우 복잡하고 다양한 부 체계를 포함하는 시스템 수준의 최적화를 통해 접근해야 한다. 전체 시스템 최적화 문제의 복잡성을 완화하기 위하여, 부체계간의 상호 관계를 적절히 단순화함으로써 시스템의 최적 성능을 달성하기 위한 설계 방안을 제시하였고, 이를 통하여 시스템의 요구로부터 DACS 형상설계로 연계되는 변수를 확인하였다. 이 요구 변수로부터 DACS의 형상설계를 위한 개념적 접근 방법에 대해 소개 하였고, 보다 높은 성능으로 만족시키기 위한 설계 방법에 대해 제안하였다.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.811-816
• /
• 2011

In this paper, we propose a optimal design using the Evolution Strategy of a high gain $4\times4$ array antenna that have the resonant frequency of a 19.05GHz with 18.86GHz~19.26GHz bandwidth. The proposed array antenna structure is designed to be allocated equally electric power by microstrip patch power splitter. Thus the optimal array antenna with power splitter are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The simulation result of $4\times4$ array antenna is confirmed that the Gain is 19.36 dBi at resonance frequency 19.05GHz.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.61-68
• /
• 2003

In this study, a newly modified soil nailing technology named as the pretension soil nailing system, is developed to reduce both facing displacements and ground surface settlements in top-down excavation process as well as to increase the global stability. Up to now, the pretension soil nailing system, has been investigated mainly focusing on an establishment of the design procedure. In the present study, laboratory model tests are carried out to investigate the failure mechanism and behavior characteristics of the pretension soil-nailed wall. Various results of model tests are also analyzed to provide a fundamental basis for the efficient design.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.496-506
• /
• 2014

In this paper the scenario based optimization of the bulbous bow of the KRISO Container Ship (KCS) is presented. The optimization of the parametrically modeled vessel is based on a statistically developed operational profile generated from noon-to-noon reports of a comparable 3600 TEU container vessel and specific development functions representing the growth of global economy during the vessels service time. In order to consider uncertainties, statistical fluctuations are added. An analysis of these data lead to a number of most probable upcoming operating conditions (OC) the vessel will stay in the future. According to their respective likeliness an objective function for the evaluation of the optimal design variant of the vessel is derived and implemented within the parametrical optimization workbench FRIENDSHIP Framework. In the following this evaluation is done with respect to vessel's calculated effective power based on the usage of potential flow code. The evaluation shows, that the usage of scenarios within the optimization process has a strong influence on the hull form.

• 한국CDE학회논문집
• /
• 제17권6호
• /
• pp.387-397
• /
• 2012

The world has faced with various environmental problems such as climatic change, global pollution, and depletion of natural resources. Conventional economic development continues not only to intensify the magnitude of the problems but also to damage growth potential of future generations. Therefore, recent manufacturers are highly required to accommodate themselves to sustainable development that aims at preventing the loss to the future generations. Moreover, the manufacturers are under heavy pressure from various environmental regulations. This paper proposes green bill of material (Green-BOM) which conforms to the environmental regulations to restructure eco-friendly manufacturing system. Green-BOM is useful for managing green product and process information to satisfy several environmental regulations by recording energy consumption, recycle rate, volatile organic compounds (VOCs), substance information, and so on.

• 한국유체기계학회 논문집
• /
• 제6권4호
• /
• pp.21-28
• /
• 2003

CMP (Chemical Mechanical Polishing) is to achieve adequate local and global planarization for future sub-micrometer VLSI requirements. In designing CMP, numerical computation is quite helpful in terms of reducing the amount of experimental works. Stresses on pad, concentration of particles and particle tracking are studied for design. In this research, the optimization of grooved pad shape of CMP is performed through numerical investigation of slurry flow in CMP process. The result indicates that the combination of sinusoidal groove and skewed pad is the most optimal shape among the twenty candidates. Useful information can be obtained in velocity, pressure, stress, concentration of particles and particles trajectories, etc.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.689-697
• /
• 2005

The soil nailing system at permanent slope reinforcement is used with various facing methods in Korea. Also, pressure-injected grout technique is variously applied to many structures. However, most design of the pressure-injected grout technique have been carried out empirically because of complicated mechanisms associated with the behavior of surrounding soils and the hardening process of cement grout. Therefore this study, a newly modified soil nailing technology named as the PGSN (Pressure Grouting Soil Nailing) system with fabric form is developed to increase the global stability. Up to now, the PGSN system has been estimated mainly focusing on an establishment of the design procedure. In the present study, numerical study are carried out to evaluate potential failure surface and minimum factor of safety including facing stiffness and expanded radius of cemented grout by SSR (Shear Strength Reduction) technique. Also, results of numerical analysis are carried out for the typical section of soil nails slope using $FLAC^{2D}$ program for expanded effective radius by pressure grouting.

• 한국IT서비스학회지
• /
• 제13권2호
• /
• pp.151-161
• /
• 2014

KOSPI 200 index options market has the highest trading volume in the global options markets. The risk and return structure of options contracts are very complex. Volatility complicates options trading because volatility plays a central role in options pricing process. This study develops a trading system for KOSPI 200 index options trading using KOSPI 200 volatility index. We design a database system to handle the complex options information such as price, volume, maturity, strike price, and volatility using Oracle DBMS. We then develop options trading strategies to test how the volatility index is related to the prices of complicated options trading strategies. Back test procedure is presented with PL/SQL of Oracle DBMS. We simulate the suggested trading system using historical data set of KOSPI 200 index options from December 2008 to April 2012.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.9-11
• /
• 1995

In this paper, tile squirrel case induction motors required multi-objective function are designed. As the objective function of the optimization program, we select the linear combination of loss and mass of motors by using weighting factors. Optimization process is performed by using the evolution strategy (ES). ES is the algorithm that can find the global minimum. To verify validity of the proposed method, a sample design is tried.