• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.73-79
• /
• 2016

In this paper, the grinding characteristics in thrust internal grinding have been studied using vitreous CBN wheels with a machining center. Grinding experiments have been performed according to grinding conditions such as wheel feed speed, cut depth, workpiece speed, rate of grinding width and number of grinding passes. The machining error, shape of machined surfaces, grinding force, and surface roughness have been investigated though these experiments. Based on the experimental results, the grinding characteristics on the machined surface in the internal thrust grinding are discussed.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.19-27
• /
• 2006

To survive in the current shipbuilding industry it is of vital importance for shipyards to achieve an optimal utilization of resources, make an achievable planning and ensure that this planning is kept. Possible problems should be eliminated before production starts and if unexpected disturbances occur in the actual production the right measures should be taken. Due to the dynamic nature of the production process, the continuous variation in products and the complexity of both, all this can hardly be achieved with conventional static planning and analysis systems. Simulation provides a solution here, since this enables the modelling and evaluation of the dynamic relations between product and production process. After a global introduction to production simulation in general and the application of simulation at the Flensburger shipyard, this paper presents a tool that has been developed to simulate the various complex assembly processes taking place at shipyards. Subsequently the simulation model for the subassembly production at Flensburger, in which this tool is applied, will be discussed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.217-222
• /
• 2007

This paper describes a static gait generation process and a mechanical design process of leg mechanisms for quadruped robots. Actually robot walking is realized with the joint motion of leg mechanisms. In order to calculate the time-angle trajectories for each joint of leg mechanisms, we generate end-tip trajectories with time for each leg in the global inertial coordinate system intuitively, followed by coordinate transformations of the trajectories into the local coordinates system fixed in each leg, finally the angle-time trajectories of each joint of leg mechanisms are obtained with inverse kinematics. The stability of the gait generated in this paper was verified by a multi-body dynamic analysis using the commercial software $ADAMS^{(R)}$. Additionally the mechanical specifications such as gear reduction ratio, electrical specifications of motor and electrical power consumption during walking have been confirmed by the multi-body dynamic analysis. Finally we constructed a small quadruped robot and confirmed the gait.

• Journal of Information Processing Systems
• /
• v.18 no.5
• /
• pp.711-718
• /
• 2022

In this paper, an accurate segmentation algorithm of video dynamic background image (VDBI) based on improved wavelet transform is proposed. Based on the smooth processing of VDBI, the traditional wavelet transform process is improved, and the two-layer decomposition of dynamic image is realized by using two-dimensional wavelet transform. On the basis of decomposition results and information enhancement processing, image features are detected, feature points are extracted, and quantum ant colony algorithm is adopted to complete accurate segmentation of the image. The maximum SNR of the output results of the proposed algorithm can reach 73.67 dB, the maximum time of the segmentation process is only 7 seconds, the segmentation accuracy shows a trend of decreasing first and then increasing, and the global maximum value can reach 97%, indicating that the proposed algorithm effectively achieves the design expectation.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.145-150
• /
• 2013

As a recent global trend, the majority of mega-size plant projects are delivered through EPC (Engineering, Procurement and Construction) contracts, where a single contract is awarded for engineering, procurement, and construction. Under this contracting mechanism, it is challenging for contractors to carry out the projects under traditional project management processes used in design-bid-build projects. A new EPC Plant, the POSCO Special Steel Plant in Changwon, was built successfully at the beginning of 2012 and it is currently in full-scale production. The project has encountered a number of major difficulties however, with some technical and managerial issues through its development process. As summarized in this paper, the authors (as project participants with the contractor) investigated it as a post construction analysis and recorded the Lessons-learned for future project management improvement.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.91-103
• /
• 2015

To increase the competitiveness of domestic manufacturers products, CAE system, process and fast delivery of development information and implementation of retrieval system introduced for manufacturers is necessary situation For this purpose, this study analysed instance to build integrated design simulation system that provide design automation, modular design, design standards, automation of quality verification and design knowledge. Also, we discuss that improve design of the new product and increasing the satisfaction of our customers. Completed development of simulation systems are the basic steps, and pilot operation about new product. During pilot operation, the systems is improved. Through this process, the experimental data accumulated to increase the effectiveness of the simulation, and improve the utilization. Therefore, this study have many theoretical, practical value for growing global company.

• Atmosphere
• /
• v.16 no.3
• /
• pp.203-213
• /
• 2006

The objective of this paper is to investigate the effects of physical parameterization on the simulation of a snowfall event over Korea caused by air-mass transformation by using the PSU/NCAR MM5. A heavy snowfall event over Korea during 3-5 January 2003 is selected. In addition to the control experiments employing simple-ice microphysics scheme, MRF PBL scheme, and original surface layer process, three consequent physics sensitivity experiments are performed. Each experiment exchanges microphysics (Reisner Graupel), boundary layer (YSU PBL) schemes, and revised surface layer process with a reduced thermal roughness length for the control run. The control run reproduces an overall pattern of snowfall over Korea, but with a high bias by a factor of about 2. As revealed in the previous studies, the cloud microphysics and PBL parameterizations do not show a significant sensitivity for the case of snowfall. A more sophisticated cloud processes does not reveal a discernible effect on the simulated snowfall. Further, high bias in snowfall is exaggerated when a more realistic PBL scheme is employed. On the other hand, it is found that the revised surface layer process plays a role in improving the prediction of snowfall by reducing it. Thus, it is found that a realistic design of surface layer physics in mesoscale models is an important factor to the reduction of systematic bias of the snowfall over Korea that is caused by air-mass transformation over the Yellow sea.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.701-714
• /
• 2009

In the enterprises the data integration based on service requires integrated data management as the change in the environment of enterprises accelerates. Cooperation among enterprises is accomplished through accessing distributed database using business process. As this approach is performed based on the global query, problems such as data heterogeneity, schema heterogeneity, and verification of validity have to be solved in advance for the interoperability among the heterogeneous system. Thus, cooperation requires dynamic and reliable construction. In this paper, we propose XMDR-DSM (eXtended MetaData Registry-Data Service Mediator) system for cooperation. XMDR-DSM, which is comprised of XMDR-DS, XMDR-DQP, and XMDR-DAI, supports the mapping between global schema and local schema and provides data access and integration service. Therefore, XMDR-DSM enables the mutual support of business operations among heterogeneous database. In addition, it can secure information as reusable asset and the standardization of interchange. Also it can manage unified information since it provides business process based on workflow; therefore, it will be able to increase the life span of information and reduce the cost.

• The Journal of Society for e-Business Studies
• /
• v.4 no.3
• /
• pp.25-42
• /
• 1999

As todays manufacturers and business organizations are struggling to compete in the global marketplace, they are concentrating on the efficient use of numerous information on design, development production, testing, distribution, and maintenance of products throughout their whole life cycles. To meet these organizations demands on information integration, the CALS has been recently focused as a dominant philosophy. In this paper, we introduce the computer supports for engineering CALS in which the engineering process at an initial phase of product development is simultaneously and collaboratively peformed. The proposed system supports the following functions: a virtual prototyping, a distributed collaborative design, and engineering information management. We have conformed to CORBA (Common Object Request Broker Architecture) standard to support interoperability between distributed objects and have used JAVA to support cross-platform and distributed user access to the system on the Web. Under this system, multidisciplinary design teams in engineering CALS environment can collaboratively perform their tasks, share design information and communicate with each other on the Web.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.83-92
• /
• 2013

Software globalization is the supporting process of adapting computer software to different country and culture. Most efforts for software globalization have been focused on the development of software implementation techniques or tools. However, global software sold worldwide has different requirements implied by different contexts, and the difference of requirements may derive different architectural design. In this paper, we define such architectural design knowledge as knowledge models and propose a method for developing and using the knowledge models for software globalization. Also we use set-top box middleware systems for digital data broadcast to validate the applicability of the proposed models and methods.