• Journal of the Korean Chemical Society
• /
• v.67 no.5
• /
• pp.339-347
• /
• 2023

In this study, a nanocomposite of multi-walled carbon nanotubes@poly(p-phenylenediamine)-Prussian blue (MWCNTs@PpPD-PB) was synthesized and employed for the electrochemical detection of hydrogen peroxide (H₂O₂). A straightforward approach was utilized to prepare an electrochemical H₂O₂ sensor using a MWCNTs@PpPD-PB modified glassy carbon electrode, and its electrochemical behavior was investigated through techniques such as electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The modified electrode displayed a favorable electrocatalytic response towards the reduction of H₂O₂ in an acidic solution. The developed sensor exhibited linearity in the concentration range of 0.005 mM to 2.225 mM for H₂O₂, with high sensitivity (583.6 ㎂ mM^-1cm^-2) and a low detection limit (0.95 ㎛, S/N = 3) at an applied potential of +0.15 V (vs. Ag/AgCl). Additionally, the sensor demonstrated excellent selectivity, reproducibility, and stability. Moreover, successful detection of H₂O₂ was achieved in real samples.

• Archives of Pharmacal Research
• /
• v.2 no.2
• /
• pp.111-114
• /
• 1979

Diazepam was investigated in aqueous buffer media using pulsed rotation voltammetry. The dependence of half-wave potentials on pH indicated a two proton involvement in a two electron transfer reduction in the pH range 3-10. Dizaepam at micromolar concentration levels may be determined by measurement of the limiting difference current.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.12
• /
• pp.2407-2412
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• v.19 no.8
• /
• pp.825-830
• /
• 1998

The electrocatalytic reduction of dioxygen by Co(TTFP)(Y)2 {Y=H2O or HO-} is investigated by cyclic voltammetry, spectroelectrochemistry, hydrodynamic voltammetry at a glassy carbon electrode in dioxygen-saturated aqueous solutions. Electrocatalytic reduction of dioxygen by CoⅡ(TTFP)(Y)2 establishes a pathway of 2e- reduction to form hydrogen peroxide, and then the generated hydrogen peroxide is reduced to water by CoⅠ(TTFP)(Y)2 at more negative potential. CoⅡ(TTFP)(Y)2 may bind dioxygen to produce the adduct complex [CoⅡ-O2 or CoⅢ-O2] which exhibits a Soret band at 411 nm and Q band at 531 nm.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1683-1688
• /
• 2007

This paper presents a novel simple method for introducing gold nanoparticles in a poly(4-vinylpyridine) (PVP) polymer layer over a glassy carbon (GC) electrode with the aim of forming a tunable electrochemical interface against a cationic ruthenium complex. Initially, AuCl4 ? ions were spontaneously incorporated into a polymer layer containing positively charged pyridine rings in an acidic media by ion exchange. A negative potential was then applied to electrochemically reduce the incorporated AuCl4 ? ions to gold nanoparticles, which was confirmed by the FE-SEM images. The PVP layer with an appropriate thickness over the electrode blocked electron transfer between the electrode and the solution phase for the redox reactions of the cationic Ru(NH3)6 2+ ions. However, the introduction of gold nanoparticles into the polymer layer recovered the electron transfer. In addition, the electron transfer rate between the two phases could be tuned by controlling the number density of gold nanoparticles.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.75-80
• /
• 2009

The effect of polyoxometalate monolayers on the electrodeposition of Au nanoparticles (AuNPs) on glassy carbon (GC) surfaces was examined by electrochemical and scanning electron microscope techniques. The presence of $SiMo_{12}O^{4-}_{40}$-layers resulted in average particle sizes of ca. 60 nm, which is larger than AuNPs deposited on bare GC surfaces. AuNPs electrodeposited on $SiMo_{12}O^{4-}_{40}$-modified GC surfaces for 20 s exhibited the best electrocatalytic activity for oxygen reduction. This system exhibited similar or slightly better efficiency for oxygen reduction than a bare Au electrode. Rotating disk electrode experiments were also performed and revealed that the catalytic reduction of oxygen on AuNPs deposited on $SiMo_{12}O^{4-}_{40}$-modified GC electrodes is a two-electron process.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1054-1058
• /
• 1994

Different behavior on the formation of soluble intermediate was observed depending on the substrate employed during the nucleation of lead dioxide from plumbous ion using a rotating ring-disk electrode. It was found that no soluble intermediate was formed at glassy carbon electrode, while the presence of soluble intermediate could be detected at platinum substrate. From the different anodic behavior of two substrates, the formation of a probable Pb(Ⅲ) soluble intermediate was suggested. A most probable nucleation mechanism at the platinum substrate involving a second order chemical reaction was derived on the basis of rotating disk electrode experiments.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.571-576
• /
• 2000

Electrocatalytic effects for the reduction of thionyl chloride in $LiAICI_4/SOCl_2$ electrolyte solution containing Schiff base M(II) (M; Co and Fe) complexes are evaluated by determining kinetic parameters with cyclic voltammetry and chronoamperometry at a glassy carbon electrode. The charge transfer process during the reduction of thionyl chloride is affected by the concentration of the catalyst. The catalytic effects are demonstrated from both a shift of the reduction potential for the thionyl chloride toward a more positive direction and an increase in peak currents. Catalytic effects are larger in thionyl chloride solutions containing the binuclear [M(II) $_2$ (TSBP)] complex rather than mononuclear [M(II)(BSDT)] complexes. Significant improvements in the cell performance have been noted in terms of both thermodynamics and activation energy for the thionyl chloride reduction. The activation energy calculated from the Arrhenius plots is 4.5-5.9 kcal/mole at bare glassy carbon electrodes. The activation energy calculated for the catalyst containing solution is 3.3-4.9 kcalmole, depending on whether the temperature is lowered or rasied.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.817-821
• /
• 2016

Levodopa or L-3,4-dihydroxyphenylalanine (L-DOPA) is the direct precursor of the neurotransmitter dopamine. L-DOPA is a well-known neuroprotective agent for the treatment of Parkinson's disease symptoms. L-DOPA was synthesized using the enzyme, tyrosinase, as a biocatalyst for the conversion of L-tyrosine to L-DOPA and an electrochemical method for reducing L-DOPAquinone, the product resulting from enzymatic synthesis, to L-DOPA. In this study, three electrode systems were used: A glassy carbon electrode (GCE) as working electrode, a platinum, and a Ag/AgCl electrode as auxiliary and reference electrodes, respectively. GCE has been modified using electropolymerization of pyrrole to facilitate the electron transfer process and immobilize tyrosinase. Optimum conditions for the electropolymerization modified electrode were a temperature of $30^{\circ}C$ and a pH of 7 producing L-DOPA concentration 0.315 mM. After 40 days, the relative activity of an enzyme for electropolymerization remained 38.6%, respectively.

• Journal of Sensor Science and Technology
• /
• v.33 no.5
• /
• pp.366-372
• /
• 2024

In this study, we present a novel approach to improve electrochemical heavy metal ion (HMI) sensing responses via post-synthetic modification of carbon nanotube-based metal-organic framework (MOF) nanocomposites with a Schiff base. UiO66-NH₂ was employed as the MOF and incorporated with multi-walled carbon nanotubes (MWCNT) through in-situ growth, enhancing the electrical conductivity of the MWCNT-UiO66-NH₂ composite. Subsequently, the Schiff base, which has been proven to be an excellent ligand for metal ion detection, was functionalized onto MWCNT-UiO66-NH₂ via post-synthetic modification to improve its HMI absorption capacity. To evaluate the effect of the Schiff base on HMI detection capacity, electrochemical sensing of Cd²⁺, Pb²⁺, Cu²⁺, and Hg²⁺ was performed in an aqueous solution utilizing the MWCNT-UiO66-Schiff modified electrode as well as the bare electrode. Individual differential pulse anodic stripping voltammetry results revealed that the modified electrode with MWCNT-UiO66-Schiff exhibited increased HMI sensing properties, especially with 1.82-fold improvement in average oxidation currents toward 10 µM of Cu²⁺ compared to that for a bare glassy carbon electrode. The selective Cu²⁺-sensing properties of MWCNT-UiO66-Schiff were reflected in the highly selective Cu²-binding affinity of the Schiff base-containing model molecules compared to those of Cd²⁺, Hg²⁺, and Pb²⁺. Our work provides a new strategy for improving the sensing properties of electrochemical HMI sensors by the post-synthetic modification of MWCNT-UiO66 with a Schiff base.