• 수산해양교육연구
• /
• 제12권2호
• /
• pp.164-175
• /
• 2000

Port facilities and marine structures used in marine environment were encountered to corrosion damages because of the influence of Cl-. Generally, to protect these accidents, anti-corrosion paint and epoxy coating have been used. But they were still remained erosion-corrosion damage like impingement erosion, cavitation erosion and deposit attack. It is necessary to develope the new composite lining material in order to protective those corrosion damages. In this paper, polyester glass flake, vinylester glass flake lining and epoxy coating for SS400 were investigated by the electrochemical polarization test and the impingement-cavitation erosion test for corrosion behaviour under the sea water. The main results obtained are as follows ; 1) Epoxy coating appear potentiodynamic polarization behaviour, but polyester glass flake and vinylester glass flake lining do not appear potentiodynamic polarization behaviour. 2) Open circuit potential of polyester glass flake lining is more noble than that of epoxy coating and corrosion current density of polyester glass flake lining is less drained than that of epoxy coating in sea water. 3) Open circuit potential of vinylester glass flake lining is more noble than that of polyester glass flake lining and corrosion current density of vinylester glass flake lining is less drained than that of polyester glass flake lining in the sea water.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.359-365
• /
• 2000

Port facilities and marine structures used in marine environment were encountered to corrosion damages because of the influence of $Cl^-$. Generally, to protect these accidents, mainly applied anti-corrosion paint and epoxy coating. But it was still remained erosion-corrosion damage such as impingement erosion, cavitation erosion, deposit attack. There was needs to develope the new coating materials to protective those corrosion damages. This paper, polyester glass flake, vinylester glass flake lining and epoxy coating for SS were investigated electrochemical tests and cavitation erosion test for corrosion behaviour under sea water. The main results obtained are as follows, 1) Surface of epoxy coating appear erosion pin hole but surface of polyester glass flake and vinylester glass flake lining do not appear erosion pin hole after impingement-cavitation erosion test in sea water. 2) Weight loss of polyester glass flake and vinylester glass flake lining do not occur after impingement-cavitation erosion test in sea water. 3) Corrosion current density of polyester glass flake lining less drained than epoxy coating and substrate under corrosion potential.. 4) Corrosion current density of vinylester glass flake lining with three coating less drained than that of polyester glass flake lining with two coating.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.145-151
• /
• 2016

유체의 흐름에 의한 부분적 진공현상인 캐비테이션이 재료 표면에 충격을 주어 철강류 표면이 마모되는 현상에 대응하기 위해 판상형 glass-flake를 적용한 내캐비테이션용 도료를 개발하였다. 특히, 가소성이 좋고 내수성이 뛰어난 특성의 NBR (Acrylonitrile-butadiene rubber) 변성 에폭시 수지에 판상형 glass-flake를 필러로 상용하여 유 무기 복합 세라믹 코팅도료를 개발하였다. 특히 glass-flake는 두께는 100~200 nm 정도로 박막형이며, 길이는 $20{\sim}30{\mu}m$ 정도의 판상으로 종횡비가 약 200~300배에 달해 마모 및 내식성에 우수한 성능을 나타낸다. 본 도료로 도막형성 후 접착강도, 인장강도, 연신률, 내캐비테이션 성능을 평가한 결과, 인장강도 $4.8{\sim}6N/mm^2$ 이상, 파단연신률 30%이상, 마식속도 $10mm^2/h$이하, 복합사이클 내식성시험에서 모두 우수한 성능을 보였다. 특히 내 캐비테이션 성능 평가에서 기존 선진 외국 제품대비 2배 이상의 우수한 성능을 나타내었다.

• 수산해양기술연구
• /
• 제43권4호
• /
• pp.362-369
• /
• 2007

This paper was studied on the characteristics of acid resistance and thermal shock for epoxy coatings in the strong acidic environment. The exhaust gas system, such as a air preheater, desulfurization equipment, for industrial boiler is damaged by dew point corrosion. To protect the acid corrosion, the coating using nonmetal was applied. The electrochemical polarization test, acid resistance and thermal shock test for epoxy coatings were carried out. And the acid resistance and thermal shock characteristics, aspect, and electrochemical anti-corrosion characteristics for epoxy coatings in the strong acidic environment were considered. The main results are as followings: As the epoxy glass flake coating by acidic thermal shock was damaged to the crack, blistering and elution etc., the current density of epoxy glass flake coating is high. But the damage of epoxy metal complex coating by acidic thermal shock was not occurred. Therefore the characteristics of acid resistance and thermal shock for epoxy metal complex coating is better than those for epoxy glass flake coating.

• 대한화장품학회지
• /
• 제34권3호
• /
• pp.167-173
• /
• 2008

화장품 분야에서 펄 안료는 다양하게 적용되어져 왔다. 지금까지 가장 대중적으로 사용된 펄 안료는 마이카 기재에 산화철이 코팅된 것이었지만, 최종 제품에 이와 같은 펄을 사용하게 될 경우 천연 마이카에 함유된 불순물로 인해 약간의 불투명한 노란 색상이 띄게 된다[1,2]. 본 연구는 눈과 같은 반짝임을 제공하는 펄 안료 개발에 초점을 맞췄고, 눈과 같은 효과는 펄 안료의 구조와 순도 등의 영향 때문인 것을 알게 되었다. 특히, 이번 펄 안료 개발은 유리 기재와 산화철을 코팅시켜 눈의 광학적인 값(refractive index)과 입자 크기(particle size)를 눈과 유사하게 개발하였고 이는 눈과 같이 화려한 반짝임(glittering) 효과를 구현할 수 있게 되었다. 그리고 메이크업 제품에 본 펄 안료를 적용하여 화려한 제품을 개발하게 되었다.

• 자원리싸이클링
• /
• 제9권4호
• /
• pp.50-55
• /
• 2000

알루미늄 호일 스크랩의 건식 및 습식 볼밀링에 의하여 알루미늄 플레이크 분말을 체조하는 재활용 기술에 대해 여 연구하였다. 볼밀링시 알루미늄 호일 스크랩들은 볼에 의한 미소 단조에 의하여 서로 층상으로 겹쳐지고 연산되면서 작은 호일로 쪼개진 후 플레이크 분말로 변하였다. 이러한 스크랩중에 $60\mu\textrm{m}$ 이하의 호일 스크랩은 볼밀링에 의하여 알루미늄 페이스트로 재활용이 가능하였고 초기 호일의 두께가 작을수록 쉽게 플레이크 분말화가 가능 하였다. 알루미늄 호일 스크랩의 봉밀링에 의하여 얻은 풀레이크 분말을 함유하는 알루미늄 페이스트와 가스 분사된 분말을 초기원료로 사용하여 불밀링한 플레이크 분말을 함유하는 페]이스트를 유리관위에 폐인팅한 후 외관 및 광택도를 비교한 결과, 그 특성은 유사하였다.

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.107-113
• /
• 2022

The effects of fillers [talc, calcium carbonate, glass fiber, and EBR (ethylene-butene rubber)] on the shrinkage and mechanical properties of injection-molded polypropylene composites were investigated. The shrinkage correlated with the shape of the filler particles: at the same amount added, glass fibers with a large aspect ratio had the greatest effect on the shrinkage of polypropylene composites, followed by flake-shaped talc and granular calcium carbonate. It was confirmed that the addition of EBR rubber as an impact strength modifier reduced shrinkage proportionally to the added content. In addition, the addition of glass fiber resulted in the greatest increases in tensile and flexural strengths.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2001년도 춘계 수산관련학회 공동학술대회발표요지집
• /
• pp.59-60
• /
• 2001

산업의 발전과 함께 해양환경 중에서 사용되는 항만시설과 해양구조물 등을 비롯하여 철강재로 제작되는 각종 구조물, 공업용수배관, 열교환기, 선박 등의 기계장치나 각종설비는 그 사용 환경이 다양해지고 오염되면서 부식손상이 발생되어 지고있다. 더욱이 강전해질의 해양환경 중에서 기계적인 충격 침식과 더불어 전기화학적인 부식이 중첩하여 발생하는 경우에는 침식과 부식 이 상호간에 가속하는 상승효과 때문에 각종 기계장치 및 설비의 수명에 대한 안정성 확보가 어렵다. (중략)

• 한국재료학회지
• /
• 제20권2호
• /
• pp.72-77
• /
• 2010

Glass-ceramics were fabricated by heat-treatment of glass obtained by melting a coal bottom ash with $Li_2O$ addition. The main crystal grown in the glass-ceramics, containing 10 wt% $Li_2O$, was $\beta$-spodumene solid solution, while in $Li_2O$ 20 wt% specimen was mullite, identified using XRD. The activation energy and Avrami constant for crystallization were calculated and showed that bulk crystallization behavior will be predominant, and this expectation agreed with the microstructural observations. The crystal phase grown in $Li_2O$ 10 wt% glass-ceramics had a dendrite-like shaped whereas the shape was flake-like in the 20 wt% case. The thermal expansion coefficient of the $Li_2O$ 10 wt% glass-ceramics was lower than that of the glass having the same composition, owing to the formation of a $\beta$-spodumene phase. For example, the thermal expansion coefficient of $Li_2O$ 10 wt% glass-ceramics was $20\times10^{-7}$, which is enough for application in various heat-resistance fields. But above 20 wt% $Li_2O$, the thermal coefficient expansion of glass-ceramics, on the contrary, was higher than that of the same composition glass, due to formation of mullite.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.330-331
• /
• 2006

Fabrication of a nano-laminar ceramic composite by sintering thin ceramic plates was examined. Silver-coated glass flakes with a thickness of less than $1{\mu}m$ were consolidated by pulsed current sintering or hotpressing to obtain model composites. The samples sintered at the optimum conditions were fairly dense, and the flakes were aligned by uniaxial press. The metal coating remained on the flakes through the sintering process, and became an interface layer between the flakes. No crack propagation through the transverse direction of the lamellar was observed in the indentation test. The possibilities of high resistance against crack propagation was suggested.