• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.185-190
• /
• 2000

The sound absorption coefficient of glass wool (bulk density of 48 kg/$m^3$ and 32 kg/$m^3$) was measured by reverberation room method as varying their cross-sectional area. The results show that the absorption is larger for smaller samples because of edge effect. The absorption coefficient with two different kinds of sources, 1/3-octave band and white noise, gives similar values.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.333-336
• /
• 2012

ISO 13784-1 sandwich panel tests were conducted by FILK, KICT in Korea, SP in Sweden and CSIRO in Australia. Sandwich panels composed of steel sheets, EPS and glass wool supplied by FILK were tested. Mainly heat release rate was compared and equlity of distribution also analyzed on the point of statistical view based on ISO.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2011년도 추계학술논문발표회 논문집
• /
• pp.201-204
• /
• 2011

ISO 13784-1 sandwich panel tests were conducted by FILK, KICT in Korea, SP in Sweden and CSIRO in Australia. Sandwich panels composed of steel sheets, EPS and glass wool supplied by FILK were tested. Mainly heat release rate was compared and equality of distribution also analyzed on the point of statistical view based on ISO.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.272-277
• /
• 1997

The object of this paper is to analyze the surface temperature of RC structures caused by fire. The experimental analysis is undertaken by using following two methods. 1) Simulation to analyze the relationship between the temperature and the condition change for glass wool caused by fire. 2) Temperature-analysis (TG/DTA tests) of RC structures. From the results of the two experimental analysis, it was possible to estimate the temperature of RC concrete structures caused by fire.

• 한국화재소방학회논문지
• /
• 제34권2호
• /
• pp.14-21
• /
• 2020

본 논문은 ISO 9705 2/5축소모델 2개를 실내 공간구획에 사용되는 경량칸막이를 이용하여 구획 한 후 ISO 9705 시험을 재현하여 이면부로의 화재위험성에 관한 연구이다. 실험 시료는 시공 시 가장 많이 사용되고 있는 SGP 칸막이, 스터드 칸막이, 그라스울 패널, 우레탄폼 패널, 샌드위치 패널, 유리 칸막이를 선정 하였고, ISO 9705시험 기준에 따라 버너에 점화 전 측정 장치와 데이터의 기록을 시작하여 120 s간 유지시켜 안정화를 취하고, 점화 후 600 s 동안 100 kW, 이후 600 s 동안 300 kW까지 증가하였다가 종료 후 180 s동안 관찰하여 이면부로의 화재 위험성 및 벽체의 화재 패턴을 분석하였다. 점화원에서 발생된 열량으로 인한 최대 이면온도는 SGP 칸막이 67.7 ℃, 스터드 칸막이 55.1 ℃, 그라스울 패널 52.4 ℃, 샌드위치 패널 727.4 ℃, 우레탄폼 패널 561 ℃, 유리 칸막이 630.5 ℃로 측정되었다. 샌드위치 패널과 우레탄폼 패널의 경우 내장재에 용융으로 인한 가연성 가스의 폭발 현상이 발생하였고 강화유리는 수열부와 비수열부의 온도차이로 인하여 유리가 파열되며 인접구획실로의 화재 위험성이 높은 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.65-69
• /
• 1991

소음제어대책 수립시, 흡음구조는 공조용소음기, 공업용소음기, Enclosure, 실 내 흡음판등에 폭넓게 이용되고 있다. 흡음구조의 재료중 글라스울은 뛰어난 흡음성능과 고온에서의 내구성 및 난연성등으로 인하여 여러 흡음재료중에 서 가장 많이 이용되고 있으나 글라스율 미립자의 비산 및 강도문제로 글라 스율에 글라스 클로스(Glass Cloth), P.E.Film등과 같은 글라스울 비산방지막 과 유공함석판을 붙인 흡음구조체로 제작하여 이용하는 것이 일반적이다. 국 내외적으로 글라스울만의 흡음율 데이타는 각종 문헌등에 많이 발표되어 있 으나 글라스울에 글라스울 비산방지막과 유공함석판을 붙인 흡음구조체의 흡음율데이타는 거의 없는 실정이다. 본 연구에서는 이러한 글라스울 흡음구 조체의 글라스울의 밀도, 글라스울 비산방지막의 종류, 유공함석판의 유공치 수 등에 따른 흡음특성을 잔향실법 흡음율측정방법에 의해 측정 평가하고 이들을 상호 비교검토하여 각종 소음 제어대책의 기초 설계자료로 제시하고 자 한다.

• 대한미생물학회지
• /
• 제21권4호
• /
• pp.455-460
• /
• 1986

This study was undertaken to investigate to know whether spleen and lymph node cells from immunized mice can transfer systemically the delayed-type hypersensitivity(DTH) reaction to Salmonella typhimurium and to characterize the lymphoid cells using glass, nylon wool and rabbit anti-mouse thymocyte serum. Mice, C57BL/6 or ICR, were immunized subcutaneously at 11, 8 and 2 days before adoptive systemic transfer with $100{\mu}g$ of protein antigen from S. typhimurium in complete Freund adjuvant. It was found that DTH reaction to S. typhimurium could be transferred to normal recipient systemically by both spleen and lymph node cells($10^8\;cells$, respectively) from immunized mice. The cells responsible for this transfer of DTH reaction were glass nonadherent T lymphocytes.

• KIEAE Journal
• /
• 제1권2호
• /
• pp.47-54
• /
• 2001

Single sound absorbers such as porous materials, panels, and Helmholts resonators have limited performance with some extents of frequency region. For example, porous materials do not attenuate low frequency sounds, while panels do not absorb high frequency sounds. Composite absorption structure with coverings, porous materials, and air gaps are an alternative for wide band sound absorption. Slits, panels, perforated panels are those materials for coverings, glass wool, mineral wool, polyester, and polyurethane are frequently used porous materials. Air gap between the porous material and background surface is one of major factors which governs the absorption characteristics of composite absorption structures, especially in the low frequency area. Calculations and measurements show that the absorption coefficients of composite absorption structure, in mid and low frequency bands, are getting higher with increased air gaps. Perforated panels rather than slits and panels are good coverings with higher number as far as absorption coefficient is concerned. Perforated panels with porous materials and 37 cm of air gaps in background have high absorption coefficients for all frequency bands, above 0.7 to 1.0. All measurements are performed in reverberation chamber, Mokpo National University, according to ISO 354 and ISO 3382.

• KIEAE Journal
• /
• 제11권1호
• /
• pp.3-8
• /
• 2011

Sound absorbing materials used for lightweight panels and interior material are mainly made of fibroid material such as glass wool or rock wool. However these fiber type sound absorbing materials have some problems such that sound absorption could be decreased as time goes by because of durability. In addition, dust scattering from fiber type material can cause another problem in health. In this point of view, this study aims to develop environment friendly sound absorbing material using Hwangto(so called loess or yellow soil), a traditional housing material. Hwangto is natural housing material in Korea and generally known for improving indoor air quality. Hwangto panel is made to construct on the floor, wall and ceiling, and expected that there is not enough absorption. Present study tried to develop environment friendly sound absorbing material that has high sound absorption performance with good environment performance in terms of air quality. Pore rate was designed to maximize the absorption in the specific frequency bands, and two kinds of backing space were applied in order to see the effect of backing space. As a result peak frequency that has maximum absorption is going high as the pore rate is increased. The backing space provides more absorption and makes the peak frequency down to low.

• 품질경영학회지
• /
• 제47권3호
• /
• pp.425-435
• /
• 2019

Purpose: The purpose of this study was to resolve the Naval ship's Local Operation Panel(LOP) malfunction problems which caused by overheating in summer season and dispatching to equatorial regions. Methods: Instead of using dual type heat insulation materials(consist with ceramic wool and glass wool), aerogel heat insulation materials were used for decreasing heat emissions from gas-turbine heat waste steam pipes passing water-jet- room. Experiment and Computational analysis of heat flow were conducted to analyze the internal room temperature changes. Results: The results of this study are as follows; The aerogel heat insulation materials suppress heat emission more efficiently than dual type insulation materials. The cold surface temperature of insulation was far more decreased and internal room, LOP surface temperature also showed significant results too. Conclusion: The substituted heat insulation materials appeared remarkable performance in decreasing room temperature that it could be used for suppressing the LOP overheatings and malfunctions.