• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.950-953
• /
• 1999

Spin tunneling giant magnetoresistance effect was studied to utilize in the application of random access memory. Ferromagnetic/Insulator/Ferromagnetic films were sputtered on glass substrates and perpendicular current was applied. Measurements of magneto- resistance of the junction showed 8.6% of MR ratio. Voltage output depends on the magnetization directions of the write line and read line, thus enabling the system to be used as a random access memory

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.462-464
• /
• 1990

We report the development of a surface discharge preionized KrF discharge Laser with a new type of high-brightness Corona preionizer using a segmented columnar $BaTiO_3$ dielectric. This Laser characteristic was higher value than that obtained with the conventional corona preionizer using a glass, $Al_2O_3ceramic$, Kapton film, or a Teflon insulator.

• 전기의세계
• /
• v.31 no.3
• /
• pp.218-225
• /
• 1982

Metal-Oxide-Metal thin film diodes have been fabricated on the glass substrates by conventional vacuum evaporation method, and the electrical properties, primarily current-voltage characteristics of diodes, have been discussed in the light of various conduction theories presented so far. The experimental results were ploted in the different figures according to the assumed theory, and the characteristic coefficients peculior to these theories were estimated from the function dependence of current (I) upon voltage (V), temperature (T) and oxide film thickness (d).

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.97-102
• /
• 2010

Propagation modes of symmetric metal-insulator-metal SPP waveguides are analyzed. Main characteristics of these waveguides such as mode effective index, propagation length, and penetration depths are calculated at the telecom wavelength for different layer thickness. We adopt Au, Al as a metal material and air, glass as a dielectric material and obtain different optical characteristics. The surface plasmon characteristics in this paper provide a numerical insight for designing nanostructure metal plasmon waveguide.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.198-200
• /
• 2003

In this paper, electrical characteristics of EP(engineering plastic) studies for the purpose of electrical insulation materials. A base resin of the EP are Polyamide and Polyphthalamide. And filler is Glass Fibre. Electrical characteristics of EP represents volume resistivity, arc resistance and breakdown voltage according to glass fiber contents. We compare before water immersion and after water immersion. As the results of experiments, Polyphthalamide has good characteristics of insulation material rather than Polyamide as an insulator for electrical power system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.206-206
• /
• 2003

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, glass surface was treated by plasma to examine the effect of dry interface treatment without coupling agent. It was identified that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.5
• /
• pp.206-212
• /
• 2003

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, glass surface was treated by plasma to examine the effect of dry interface treatment without coupling agent. It was identified that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.235-238
• /
• 2003

Thermo-plastic has generally bad electrical characteristics at high temperature comparing to thermoset-plastics when the plastic apply to electrical power apparatus as an electrical insulator. To solve the problem, we study engineering plastics such as Polyamide and Polyphthalamide as a base resin. And filler of the engineering plastics is glass fiber. Electrical characteristics studied are permittivity, loss factor and breakdown strength according to temperature and frequency of measuring signal. Electrical characteristics of Polyphthalamide has good temperature and frequency dependency comparing to those of Polyamide.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.327-332
• /
• 2011

Plasma polymerized styrene (ppS) thin films were prepared on ITO coated glass substrates for a MIM (metal-insulator-metal) structure with thermally evaporated Au thin film as metal contact. Also the ppS thin films were applied as organic insulator to a MIS (metal-insulatorsemiconductor) device with thermally evaporated pentacene thin film as organic semiconductor layer. After the I-V and C-V measurements with MIM and MIS structures, the ppS revealed relatively higher dielectric constant of k=3.7 than those of the conventional poly styrene and very low leakage current density of $1{\times}10^{-8}Acm^{-2}$ at electric field strength of $1MVcm^{-1}$. The MIS structure with the ppS dielectric layer showed negligible hysteresis in C-V characteristics. It would be therefore expected that the proposed ppS could be applied as a promising dielectric/insulator to organic thin film transistors, organic memory devices, and flexible organic electronic devices.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.99-104
• /
• 2006

The Langmuir-Blodgett(LB) technique has attracted considerable interest in the fabrication of electrical and electronic devices. Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A linear relationship between the monolayer compression speed u and the molecular area Am. Compression speed a was about 30, 40, 50mm/min. Langmuir-Blodgett(LB)layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 9$\sim$21. Also, we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V. The I-V characteristics of the device are measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.