• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.74-79
• /
• 2011

The pore generation technology using GHM (Glass Hollow Microsphere) was studied in order to reduce the weights of porcelain. In this study, we verify the property of modified slurry by adding GHM. The modified slurry was prepared by adding 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37) of GHM to the slurry for porcelain. The slurry viscosity were stable inside a content range of 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37). However, the viscosity of modified slurry increased more than 3.0 wt%(K1) and 6.5 wt%(K37). The formed specimen by slip casting was fired at $1229^{\circ}C$, $1254^{\circ}C$. As the amount of GHM content increased, the weight decreased and the addition of 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37) of GHM resulted in a weight drop of 30%(K1) and 25(K37). However, when the GHM content increased, the strength decreases over 70%. This is caused by the presence of a large volume of surface defects (pores) and defects from the agglomeration of GHM.

• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.79-83
• /
• 2021

본 연구에서는 기존의 silicon alkoxide(tetraethyl orthosilicate, TEOS)에 비해 단가가 저렴하여 상업화에 유리한 물유리를 전구체로 사용하여 계면활성제의 농도에 따라 형성되는 다양한 크기의 실리카 중공 미세구(hollow silica microsphere, HSM)를 합성하였다. 계면활성제의 농도에 따른 실리카 중공 미세구의 형성에 대한 물성을 퓨리에 분광기(Fourier transform infrared spectrometer), 접촉각 측정기(contact angle measurement), Brunauer-Emmett-Teller 및 Barrett-Joyner-Halenda 분석기와 전계방사형 주사전자현미경(field emission scanning electron microscopy)를 이용하여 분석하였다. 계면활성제를 적정량의 농도로 투입하여 porou s한 물유리 기반 실리카 중공 미세구를 제조할 경우 비표면적은 169 m²/g, 평균 입자 크기 25.3 ㎛ 및 표준편차는 6.25로 우수한 실리카 중공 미세구가 형성됨을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.258-259
• /
• 2014

Modern concrete high safety, constructability and economy due to advantages such as buildings used for more than about 70%, but due to the low thermal performance is essential, such as installation of additional insulation is required, and therefore increase the cost of construction, as well as the construction period and condensation Symptoms such as a domestic environment, such as to inhibit the problem by generating such an improvement has been desired. In this study, we want to present the base line data for the development of improved insulation performance concrete with analyzing and evaluating the Durable Properties of the concrete combination of hollow glass microsphere and lightweight aggregate.

• 한국분말재료학회지
• /
• 제29권6호
• /
• pp.505-510
• /
• 2022

The thermal shock resistance of cement composites with hollow glass microspheres (HGM) is investigated. Cement composites containing various concentrations of HGM are prepared and their properties studied. The density, thermal conductivity, and coefficient of thermal expansion of the composites decrease with increasing HGM concentration. A thermal shock test is performed by cycling between -60 and 50℃. After the thermal shock test, the compressive strength of the cement composite without HGM decreases by 28.4%, whereas the compressive strength of the cement composite with 30 wt% HGM decreases by 5.7%. This confirms that the thermal shock resistance of cement is improved by the incorporation of HGM. This effect is attributed to the reduction of the thermal conductivity and coefficient of thermal expansion of the cement composite because of the incorporation of HGM, thereby reducing the occurrence of defects due to external temperature changes.

• 대한토목학회논문집
• /
• 제42권4호
• /
• pp.449-455
• /
• 2022

콘크리트는 가장 많이 사용되는 건설재료이다. 콘크리트의 비교적 높은 자중은 압축강도 발현과 수축저항성에서 이점을 갖지만, 초장대교량이나 초고층빌딩에 적용되기에는 구조물 자체의 무게가 큰 폭으로 증가하게 되어 거대 구조물의 형상을 제약하는 조건이 되기도 한다. 이러한 문제를 해결하고자, 경량골재를 사용하는 경량 콘크리트 개발이 많이 진행되어 왔으나, 경량 골재의 경우 다공질 구조로 인해 자체 강도가 작기 때문에, 일반적으로 경량 콘크리트는 일반 콘크리트에 비해서 낮은 강도를 가지게 된다. 본 연구에서는 기존의 경량 콘크리트의 한계점을 극복한 경량을 유지하면서 고강도를 만족시키는 건설재료를 개발하고자 하였다. 중공 유리 마이크로스피어를 낮은 물-시멘비율의 매트릭스에 다량으로 사용하는 방법을 적용해 보았으며, 네 가지 다른 종류의 마이크로스피어를 사용하여 그 적용성을 살펴보았다. 실험결과, 마이크로스피어의 종류와 관계 없이 밀도 1.7 g/cm³를 유지하면서 압축강도 60 MPa와 80 MPa를 각각 상온양생과 고온양생 조건에서 만족하는 것을 확인할 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.28-35
• /
• 2023

Moiré patterns emerge due to the interference between the non-emission area of the LED screen and the grid line in an image sensor of a video recording device when taking a video in the presence of the LED screen. To reduce the moiré intensity, we have fabricated an anti-moiré filter using hollow glass microspheres (HGMs) by slot-die coating. The LED screen has a large non-emission area because of a large pitch (distance between LED chips), causing more severe moiré phenomenon, compared with a display panel having a very narrow black matrix (BM). It is shown that HGMs diffuse light in such a way that the periodicity of the screen is broken and thus the moiré intensity weakens. To quantitatively analyze its moiré suppression capability, we have calculated the spatial frequencies of the moiré fringes using fast Fourier transform. It is addressed that the moiré phenomenon is suppressed and thus the amplitude of each discrete spatial frequency term is reduced as the HGM concentration is increased. Using the filter with the HGM concentration of 9 wt%, the moiré fringes appeared depending sensitively on the distance between the LED screen and the camera are almost completely removed and the visibility of a nature image is enhanced at a sacrifice of luminance.