• 한국세라믹학회지
• /
• 제25권1호
• /
• pp.1-6
• /
• 1988

The IR edge absorption of the important pure components of ZrF4-based glasses, including two previously uncharacterized components(ZrF4 and AlF3), has been measured. Values of the glass IR edge absorption coefficients have been calculated from these results, assuming additivity, and are compared with experimental glass absorption coefficients. The calculated ${\alpha}$ values are about a factor of two lower than the experimental values for ZrF4-based glasses, and the ZrF4 makes the largest contribution to the calculated ${\alpha}$ value.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.1-6
• /
• 2017

In these days, due to generalization of using smart mobile phone and wearable device such as smart watch, demand of Cover-glass and touch screen panel for protecting display increases. With increasing the demand of Cover-glass, slimming technique is promising for weight lightening, zero bezel. Cover-glass produced by this technique is required to decreasing thickness with increase strength. In the Cover-glass manufacturing process, mechanical processing and chemical processing has improve in the strength. Generally, Diamond electrodeposition wheel is used in mechanical process. Reinforced glass with the characteristics of the brittle and high hardness was manufactured by using a diamond electrodeposition wheel. At this time, Because of surface of the tool present non-uniform distribution of diamond particle, it has generate Loading of wheel and it has been decrease life of grinding tool, efficiency of grinding, quality and shape accuracy of workpiece. Thus Research is needed to controling particle distribution of diamond electrodeposition wheel uniformly. And it is necessary to study micro hole machining such as proximity senser hole, speaker hole positioned Cover-glass. Reinforced glass with the characteristics of the brittle and high hardness is difficult to machining. Processing of reinforced glass have generated wear of tool, micro cracks. Also, it is decreasing shape accuracy. In this paper, We conducted a study on how to control particle distribution uniformly about the diamond tool manufactured using elecetodeposition processing. It analyzed the factors that affect the arrangement of the particles in the electrodeposition process by design of experiment. And There is produced the grinding tool, which derives an optimum deposition conditions, for processing Cover-glass edge and the machinability was evaluated.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1819-1824
• /
• 2014

건축물 에너지 효율등급제도, 건축물 에너지 소비증명제 등 건축물 에너지 관련 법 제도가 지속적으로 강화되면서, 이에 대응하기 위한 고성능 단열재, 기능성 유리를 적용한 창호의 개발이 활발히 진행되고 있다. 에너지 절약을 위한 기능성 유리의 중요성이 크게 부각되고 있음에 따라 진공유리에 대한 관심이 높아지고 있다. 진공유리의 핵심공정 중 모서리 접합공정은 진공유리의 기밀성, 강도, 형상에 있어 매우 중요한 공정이다. 본 논문에서는 수소혼합가스를 이용하여 전기로 내부에서 두 장의 유리를 접합하였다. 공정변수에 따른 접합유리의 강도와 형상을 측정 및 분석 하였으며, 다구치 실험계획법을 이용하여 접합유리의 강도를 예측하였다. 추가실험을 통해 예측 값과의 오차율을 확인함으로서 실험의 타당성을 검증하였다.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.511-516
• /
• 2013

유리 모서리 접합은 디스플레이 및 건축, 가전 등 산업계의 다양한 분야에 활용되고 있으며, 패널 접합부의 두께 및 형상은 단열성능 및 강도 등 패널의 주요 성능에 큰 영향을 미치는 요인으로 작용한다. 이런 모서리 접합부의 단면은 수소혼합가스토치를 이용하여 모서리를 용융 접합 할 경우 공정변수에 의해 형상이 결정된다. 따라서 본 논문에서는 가스토치를 이용하여 모서리 접합 시 접합부에 영향을 미치는 공정변수를 설정하고, 접합단면의 형상변수를 설정하여 두 변수간의 상관관계를 분석하기 위한 회귀식을 도출하고자 하였다. 회귀식 도출을 위해 공정변수가 형상변수에 미치는 주효과 및 교호작용을 분석하였으며, 변수간의 교호작용을 고려한 다항회귀식을 도출하였다. 도출된 다항회귀식을 통해 각 공정변수 변화에 따라 모서리 접합 두께 예측 및 처짐량 예측이 가능하다.

• Composites Research
• /
• 제18권2호
• /
• pp.1-12
• /
• 2005

본 연구에서는 음향방출법을 이용하여 편측노치를 갖는 단일 Al판재 및 유리섬유/알루미늄 적층판에 대해 인장하중하의 파괴거동을 살펴보았다 단일 알루미늄의 AE신호는 2가지 형태로 분류될 수 있었다. 유리섬유i알루미늄 적층판의 경우에는, 고진폭의 긴 유지시간의 신호를 대상으로 한 FFT 주파수 해석 결과 이러한 신호들은 거시적인 균열진전 및 층간분리에 해당하는 신호임을 알았다. 또한 도달시간차를 이용한 위치표정은 균열의 개시 및 진전과정의 특징을 보여주었다. 위와 같은 AE해석과 파괴관찰을 토대로, 편측노치를 갖는 섬유/알루미늄 적층판의 파괴특성을 해명하였으며 이는 섬유층 배향 및 섬유/알루미늄층 구성비에 의존하여 변화하였다.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1353-1364
• /
• 1996

Recently semiconductor doped glasses have attracted attention as nonlinear optical materials because of their large third order nonlinear optical properties. The transparent and homogeneous CdS-doped SiO2 glass thin films were obtained by the dip=coating process of the sol-gel method. Thin films were consisted of glasses containing CdS microcrystallites which were formed by dissolved Cd2+ and S2- ions in a SiO2 matrix solutions. A subsequent thermal treatment of this samples led the formation of colloidal agglomerates and finally of microcrystallites. The size of CdS microcrystallites was about 4 to 15 nm after thermal treatments at various heating conditions. From the optical absorption spectra of the CdS-doped SiO2 glass films it was found that the absorption edge was blue-shifted compared with that of the bulk CdS crystal(~2, 4 eV) and that the amount of energy shift was inversely proportional to the crystal size. And the band gap energy increased with the decrease in crystallite size indicating that the quantum size effects occured.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.15-21
• /
• 2009

The anisotropic mechanical properties were measured for the three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate. In tensile and flexural tests, axial and edge type specimens failed by pull-out of warp and fill yarns, respectively. In contrast, the thickness type specimens failed by adhesive failure process. Longitudinal cracking occurred in several of the edge type specimens during tensile test. That cracking caused pop-in in the stress-strain curve. Defects induced by improper coupon machining caused that cracking.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1189-1190
• /
• 2013

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.772-779
• /
• 2006

Window is a critical component in the design of energy-efficient buildings. To minimize the heat loss, insulation performance of the glazing has to be improved. Manufacturing of vacuum glazing has been motivated by the possibility of making windows of very good thermal insulation properties for such applications. It is made by maintaining vacuum in the gap between two glass panes. Pillars are placed between them to withstand the atmospheric pressure. Edge covers are applied to reduce conduction through the edge. Accurate measurements have been made of the radiative heat transfer, the pillar conduction and the gas conduction using a guarded hot plate apparatus. Vacuum glazing is found to have low thermal conductance roughly below $1W/m^2K$. Among the heat transfer modes of residual gas conduction, conduction through support pillar and the radiative heat transfer between the glass panes, the last one is the most dominant to the overall thermal conductance. Vacuum glazing using very low emittance AI-coated glass has an overall thermal conductance of about $0.7W/m^2K$.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.201-205
• /
• 1994

Glasses being prepared, measurements and investigations of glass transition temperature and IR edge optical absorption have been performed for the compositions of 56ZrF4-14BaF2-6LaF3-4AlF3-(20-x)NaF-xLiF. Values for transition temperature of these glasses decrease in proportion to increasing LiF mol%(x) in the range of 0