• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.94-98
• /
• 2002

Sputtering conditions and various underlayer such as Al, Cu, Ni, Cr, Ag, Mg, Fe, Co, Pd, Au, Pt, Mo and Hf were investigated for coercivity enhancement of 20 nm Ti/CoCrPt thin films in order to increase the coercivity of the films thinner than 20 nm. Among them, Ag and Mg were effective to increase the coercivity. Particularly 2 nm Ag was very effective to increase the coercivity and nucleation field as well as to reduce ${\alpha}$ value in CoCrPt thin film such that the coercivity of 2 nm Ag/18 nm Ti/10 nm CoCrPt film was 2200 Oe. However, it seemed that other coercivity enhancement mechanism operated in CoCrPt films because Ti (002) preferred texture was not developed with Ag underlayer contrary to a general expectation. And the coercivity and nucleation field were decreased when glass substrate with rougher surface was used.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.38-45
• /
• 2009

First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30％ of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.43-48
• /
• 1982

Quality of meaty textured fish protein concentrate (MT-FPC) prepared from filefish. Navodon modestus, and sandfish. Arctoscopus japonicus, was investigated. The stability of the product during storage under various conditions was evaluated with rehydration capacity, thiobarbituric acid (TBA) value and browning colour density. MT-FPC packed in glass bottle with air and stored at room temperature showed no significant differences in TBA value, rehydration capacity and browning colour density during the storage period of 90 days. The jelly strength of product prepared from filefish was weaker than that of sandfish: and beef meat could be substituted with MT-FPC up to 50% in making hamburger and fried meat balls without a significant loss in taste, odor and texture.

• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.18-23
• /
• 2012

This study was conducted to survey the perception of domestic consumers about traditional pork dishes, and to utilize the survey result as a basis for the development of processed pork products. A survey was conducted on 218 domestic consumers regarding the following: general questions, propensity and preference to consume pork dishes, pork dishes feasible for export, and the types and problems of processed products feasible for export. The results of the survey showed that the respondents consumed pork dishes 3-4 times a month on average and they appeared to consume the pork dishes most frequently in specialized restaurants. The highest preference was shown in Samgyeopasal gui (grilled pork belly) and Galbi gui (grilled pork rib) among the pork dishes, whereas the lowest preference was shown in Kkubdegi gui (grilled pork skin) and Gookbob (boiled rice and pork served in soup). When the type of processed pork products available according to pork dishes were analyzed, the result showed that Samgyeopasal gui (grilled pork belly) and Nirbiani (slices of roast, seasoned pork in width) could be developed as a frozen product, Geyook Bokeum (stir-fried spicy pork), Bulgogi (Korean-style barbecued pork), and Galbi jjim (braised short ribs) could be developed as a retort product, and that Bossam (boiled pork eaten with a salty sauce and wrapped in greens), Pyeonyuk (slices of boiled pork), Jokbal (pork trotters), and Sundae (kneading together seasoned mixture of vegetables and glass noodles stuffing it into casings made of hog intestines, which are then tied off at the ends and boiled) could be developed as a vacuum-packed product. When the survey concerning the problems expected in the development of processed products using pork dishes was conducted, the result showed that there could be a texture change issue for Galbi gui, Samgyeopasal gui and Nirbiani; a preservation issue for Bossam, Pyeonyuk; a safety issue for Bulgogi and Geyook Bokeum; a taste and flavor change issue for Geyook Bokeum and Sundae; and a packaging issue for Gookbob.

• Korean Journal of Crystallography
• /
• v.8 no.2
• /
• pp.105-110
• /
• 1997

1μm-CdS films for a window layer of CdS/CuInSe2 solar cell have been prepared by vacuum of 1x10-3 mTorr. Source and substrate temperature ranges were used 800-1100'C and 50-200℃ respectively. Structural, electircal and optical properties of CdS films have been investigated by X-ray diffractometer (XRD), scanning electron microscopy (SSEM), electrical resistivity, the Hall measurement and optical transmission spectra. Electrical resistivity and optical transmission of the CdS films decreased with the increase in CdS source temperature without substrate heating. All the films had hexagonal structure and strong texture with (002) orientation of grain normal to the substrate glass. CdS films evaporated at 1000℃ were the highest electrical conductivity of 0.9(S/cm). Electrical resistivity and optical transmission at the substrate temperature of 100℃ were 40(Ω,cm) and 80% respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.49-55
• /
• 1986

To obtain basic information required for improving grain yield of the two modified opaque-2 synthetics, which have been developed at College of Agr., Chungnam National Univ. in 1980 and named as Puyo No.2 and No.3, physical kernel characteristics of the two synthetics were fully investigated and results obtained are as follows: Puyo No.2 synthetics had a smaller kernel size with lighter weight than the Puyo No.3. The Puyo No.2 synthetics had higher kernel density than the Puyo No.3 with large Kernel size. The Puyo No.2 had kernels with heterogenous endosperm phenotypes. Some kernels had mottled patches on endosperm, while other kernels 1/2 and 1/2 phenotypes. All the modified opaque-2 synthetics had somewhat lighter endosperm weight than the normal check hybrid. The Puyo No.2 synthetics with smaller kernel size had more germ portion compared with large kernel, Puyo No.3. The Puyo No.2 had shown also typical endosperm texture when observed under microscope after cutting by glass knife. The lysine content of the Puyo No.2 was higher than those of other varieties studied. Breeding schemes to improve the yield capacity of the two modified opaue-2 synthetics were discussed.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.131-139
• /
• 2016

Detailed knowledge on maskelynite, a glassy phase of plagioclase found in shocked meteorites and impact craters, is essential to understand a shock metamorphism. Here, we explore an inhomogeneous shock metamorphism in the lunar meteorite Mount DeWitt (DEW) 12007 with an aim to understand the formation mechanism of maskelynite. Most plagioclase grains in the DEW 12007 partially amorphized into maskelynite with a unidirectional orientation. Back-scattered electron (BSE) images of maskelynite show a remnant of planar deformation fracture possibly indicating that the maskelynite would be formed by solid-state transformation(i.e., diaplectic glass). Plagioclase with flow texture is also observed along the rim of maskelynite, which would be a result of recrystallization of melted plagioclase. Results of Raman experiments suggest that shock pressure for plagioclase and maskelynite in the DEW 12007 is approximately 5-32 GPa and 26-45 GPa, respectively. The difference in shock pressures between plagioclase and maskelynite can be originated from 1) external factors such as inhomogeneous shock pressure and/or 2) internal factors such as chemical composition and porosity of rock. Unfortunately, Raman spectroscopy has a limitation in revealing the detailed atomic structure of maskelynite such as development of six- or five-coordinated aluminum atom upon various shock pressure. Further studies using nuclear magnetic resonance spectroscopy are necessary to understand the formation mechanism of maskelynite under high pressure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.501-513
• /
• 2004

Purpose : The purpose of this study was to evaluate the effects of etching time on shear bond strength of four resin cements to IPS Empress 2 ceramic. Material and Methods: Forty rectangular shape ceramic specimens ($10{\times}15{\times}3.5mm$ size) were used for this study. The ceramic specimens divided into four groups and were etched with 10% hydrofluoric acid for 0, 10, 30, 60, 180, 300, 420, 600, and 900 seconds respectively. Etched surfaces of ceramic specimens were coated with ceramic adhesive system and bonded with four resin cement (Variolink II, Panavia F, Panavia 21, Super-Bond C&B) using acrylic glass tube. All cemented specimens were tested under shear loading untill fracture on universal testing machine at a crosshead speed 1mm/min: the maximum load at fracture (kg) was recored. Shear bond strengh data were analyzed with oneway analysis of variance and Tukey HSD tests (p<.05). Etched ceramic surfaces (0-, 60-, 300-, and 600-seconds etching period) and fracture surfaces after shear testing were examined mophologically using scanning electron microscopy. Results : Ceramic surface treatment with 10% hydrofluoric acid improved the bond strength of three resin cement except for Super-Bond C&B cement. Variolink II (41.0$\pm$2.4 MPa) resin cement at 300-seconds etching time showed statistically higher shear bond strength than the other resin cements (Panavia F: 28.3$\pm$2.3 MPa, Panavia 21: 21.5$\pm$2.2 MPa, Super-Bond C&B: 16.7$\pm$1.6 MPa). Ceramic surface etched with 10% hydrofluoric acid for 300 seconds showed more retentive surface texture. Conclusion: Within the limitation of this study, Variolink II resin cement are suitable for cementation of Empress 2 all-ceramic restorations and etching with 10% hydrofluoric acid for 180 to 300 seconds is required to enhance the bond strength.

• Archives of design research
• /
• v.14 no.3
• /
• pp.197-210
• /
• 2001

There are symbolicity and special meaning in the materials which are supposed to be used metalcraft from ancient to present. These are basical resources of hermeneutics and play a role as moaning elements. Generally, the precious Cold and Silver are mainly to be used with precious stone. But recently, ordinary materials like glass iron aluminum has begun to be used with them. Several artists are intentionally using them, and special skills which could be revealed by only the matherials are developing by them. In these skill, there are original material's texture and character of matter are looking like other matter. Well, special skills are adapted in these matters to magnify the possibility of expression, the originally codified meaning resources are disturbed. For example, The metal craft artist June Schwarcz is using the skills of electroforming, copper foiling, enameling, wire brush patina, fine wires fusing, etc. He is doing abstract forming and making various textures. And his works are very big size, and done by the skills of painting and sculpture. The outer form is very structural, special touches of the artists are heterogeneously mixed with the symbolic abstract expressionism color field. Further, there are mixed with Primitive original life atmosphere, Medieval ornamental aspect, Minimal, and Chaotic aspects. The meaning particles of these aspects are directly/indirectly joined but special skills and basic material languages are mixed together, the originally codified material language are disturbed. These disturbed material languages are becoming optically special effect and be illusion. It is making expressing way of tile metalcraft more fertile and be infinite.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.4
• /
• pp.311-325
• /
• 2017

Peridotite xenoliths in middle Miocene alkaline basalt from the Mt. Baekdu area are mainly anhydrous spinel lherzolites, displaying coarse-grained protogranular texture. These xenoliths have late-stage secondary orthopyroxene replacing olivine as the metasomatic mineral and glass formed along the grain boundaries. The studied xenoliths are characterized by the high $Mg{\sharp}[=100{\times}Mg/(Mg+Fe_{total})$ atomic ratio] of olivine, orthopyroxene and clinopyroxene (89~92) and the $Cr{\sharp}[=100{\times}Cr/(Cr+Al)$ atomic ratio] of spinel (10~29). Based on major-element data, the studied xenoliths are similar to those from the abyssal peridotites. Clinopyroxenes of the xenoliths are mostly enriched in incompatible trace elements, exhibiting two types of REE patterns: (1) LREE-depleted with $(La/Yb)_N$ of 0.1~0.2 and $(La/Ce)_N$ of 0.4~0.8. (2) LREE enriched with $(La/Yb)_N$ of 2.2~3.8 and $(La/Ce)_N$ of 1.2~1.6. The calculated equilibrium temperatures and oxygen fugacities resulted in $920{\sim}1050^{\circ}C$ and ${\Delta}fO_2(QFM)=-0.8{\sim}0.2$, respectively. It is suggested that the Mt. Baekdu peridotite xenoliths represent residues left after variable degrees of melt extraction(less than 15 vol%), which was subsequently subjected to different degrees of modal/cryptic metasomatism by silica- and LREE-enriched fluids (or melts).