• 한국터널지하공간학회 논문집
• /
• 제3권1호
• /
• pp.11-19
• /
• 2001

이 연구는 강관 보강형 다단 그라우팅공법의 설치 및 절단 시 어려움, 부식에 취약한 문제점 등을 개선하는데 목적이 있으며, 강관 대신에 고강도 유리섬유(fiberglass)를 이용한 FRP(Fiberglass Reinforced Plastic)의 적용성에 대한 연구를 수행하였다. 연구결과는 강관에 비하여 FRP 보강재의 가격이 높긴 하지만 시공성 및 내구성 등에서 우수한 것으로 파악되었다. 그리고 FRP 보강재의 형상에 따른 수치해석 결과에서는 국외에서 상용화 된 판상형 보강재 보다 등각곡선형 보강재가 더 구조적 측면에서 효율적임을 알 수 있었고, 그라우트 복합체에 대한 굴곡강도시험 결과에서는 강관과 FRP 보강재의 지보효과가 유사한 것으로 평가되었다.

• Composites Research
• /
• 제12권1호
• /
• pp.47-58
• /
• 1999

다양한 형상 및 경계조건을 갖는 적층 복합재료 및 혼합적층 복합재료 판의 자유진동해석을 위한 실험적 연구결과에 대하여 고찰하였다. 실험에 사용한 판의 재료는 탄소섬유강화(CFRP), 유리섬유강화(GFRP) 복합재료, 알루미늄-GFRP, CFRP-GFRP 혼합적층 복합재료이다. 충격해머와 가속도계를 이용한 충격가진법을 통하여 판의 고유진동수 및 노달패턴을 얻었고, 결과는 무차원화된 진동수매개변수로 제시하였다. 복합재료의 물성, 적층강도, 판의 기하학적 형상과 경계조건 등이 복합재료 판의 진동특성에 미치는 영향에 대하여 평가하였다. 실험결과의 비교/검증을 위하여 유한요소해석을 수행하였고, 서로 잘 일치함을 보였다.

• 공학교육연구
• /
• 제20권1호
• /
• pp.63-68
• /
• 2017

This research is as a case study of innovative engineering education system through idea factory of korea maritime and ocean university and deals with development of temperature-humidity control device (THCD) for fiber storage on composites in viewpoint of problem solving method. Fiber reinforced plastic (FRP) includes many variables on the composite manufacturing process. Above all, the interfacial adhesion between the fiber and the matrix acts as an important thing that decided mechanical property of the FRP, and also it is profoundly linked to external temperature and relative humidity. High void fraction leads to a result in interlaminar fracture. Therefore, in this research, to establish correlation between fiber reinforcement and fiber storage conditions of temperature and relative humidity we developed a THCD for fiber reinforcement. To evaluate performance of the THCD, glass fiber reinforced plastic (GFRP) is made under the extreme conditions each temperature $34^{\circ}C$, relative humidity 98 % and it can be said that there are the change of mechanical properties according to fiber storage conditions. As a result, the THCD showed sufficient possible application for understanding and applied research of composites field in material engineering. Also, we could check that the necessity of introduction of innovative system such as idea factory existed.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.920-925
• /
• 2012

A study of vehicle weight lightening has been progressed to reduce the fuel consumption. In this paper, the body floor in an EV (Electric Vehicle) bus has been applied by composites as CFRP and GFRP. In order to analyse a various reliability and safety, an experiment and FEM analysis was carried out to obtain weight lightening. Especially, the joint. An effective design is obtained through an experiment as well as FEM analysis. Results of stress analysis of GFRP material showed twice as much displacement than those of CFRP material. Among three kinds of joint methods, the bond joint method is occurred to a substantial shape change in the body and floor. It is found that the rivet joints are fairly suitable for stress sustaining capability.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.283-290
• /
• 2019

In global competition manufacturing companies have to produce modern, new constructions from advanced materials in order to increase competitiveness. The aim of my research was to develop a new composite cellular plate structure, which can be primarily used for structural elements of road, rail, water and air transport vehicles (e.g. vehicle bodies, ship floors). The new structure is novel and innovative, because all materials of the components of the newly developed structure are composites (laminated Carbon Fiber Reinforced Plastic (CFRP) deck plates with pultruded Glass Fiber Reinforced Plastic (GFRP) stiffeners), furthermore combines the characteristics of sandwich and cellular plate structures. The material of the structure is much more advantageous than traditional steel materials, due mainly to its low density, resulting in weight savings, causing lower fuel consumption and less environmental damage. In the study the optimal construction of a given geometry of a structural element of a road truck trailer body was defined by single- and multi-objective optimization (minimal cost and weight). During the single-objective optimization the Flexible Tolerance Optimization method, while during the multi-objective optimization the Particle Swarm Optimization method were used. Seven design constraints were considered: maximum deflection of the structure, buckling of the composite plates, buckling of the stiffeners, stress in the composite plates, stress in the stiffeners, eigenfrequency of the structure, size constraint for design variables. It was confirmed that the developed structure can be used principally as structural elements of transport vehicles and unit load devices (containers) and can be applied also in building construction.

• 한국염색가공학회지
• /
• 제27권3호
• /
• pp.165-174
• /
• 2015

To develop automobile parts, the unsaturated polyester based matrix resin(PR)/reinforcement(randomly oriented chopped E-glass fiber, GF) composites were prepared using sheet molding compound(SMC) compression molding. The effects of GF length(0.5, 1.0 1.5 and 2.0inch)/content (15, 20, 25, 30wt%) and number of ply(3, 4 and 5) on the specific gravity and mechanical properties of PR/GF composites were investigated in this study. The optimum length of GF was found to be about 1.0inch for achieving improved mechanical properties(tensile strength and initial modulus). The tensile strength and initial modulus of composites increased with increasing GF content up to 30wt%, which is favorable content range for SMC. The specific gravity, tensile strength/initial modulus, compressive strength/modulus, flexural strength/modulus and shear strength increased with increasing the number of ply up to 5, which is the maximum number of ply range for SMC. The effectiveness of ply number increased in the flexural strength > shear strength > compressive strength > tensile strength.

• Steel and Composite Structures
• /
• 제3권6호
• /
• pp.421-438
• /
• 2003

Aging and deterioration of existing steel structures necessitate the development of simple and efficient rehabilitation techniques. The current study investigates a methodology to enhance the flexural capacity of steel beams by bonding Glass Fibre Reinforced Plastic (GFRP) sheets to their flanges. A heavy duty adhesive, tested in a previous study is used to bond the steel and the GFRP sheet. In addition to its ease of application, the GFRP sheet provides a protective layer that prevents future corrosion of the steel section. The study reports the results of bending tests conducted on a W-shaped steel beam before and after rehabilitation using GFRP sheets. Enhancement in the moment capacity of the beam due to bonding GFRP sheet is determined from the test results. A closed form analytical model that can predict the yield moment as well as the stresses induced in the adhesive and the GFRP sheets of rehabilitated steel beam is developed. A detailed finite element analysis for the tested specimens is also conducted in this paper. The steel web and flanges as well as the GFRP sheets are simulated using three-dimensional brick elements. The shear and peel stiffness of the adhesive are modeled as equivalent linear spring systems. The analytical and experimental results indicate that a significant enhancement in the ultimate capacity of the steel beam is achieved using the proposed technique. The finite element analysis is employed to describe in detail the profile of stresses and strains that develop in the rehabilitated steel beam.

• 한국지반신소재학회논문집
• /
• 제13권1호
• /
• pp.33-40
• /
• 2014

보통 지중에 매설되는 관은 강성관과 연성관으로 구분된다. 연성관 중 유리섬유강화플라스틱(Glass fiber reinforced thermosetting polymer plastic, GFRP)으로 이루어진 GFRP 관은 지중에 매설시 지반과 관의 상호관계를 고려하여 설계되어야 한다. 본 연구에서는 지중에 매설되는 GFRP 관의 장단기의 구조적 거동을 조사하고자 한다. 먼저, 국내에서 생산되는 GFRP 관의 역학적 성질조사를 하고, 현장매설실험과 유한요소해석을 수행하여 장기거동 예측에 대한 기초자료로 활용하였다. GFRP 관의 장기거동을 예측하기 위해 약 5,232시간 동안의 수직 관변형을 조사하였으며, 이를 바탕으로 최대 50년 동안의 관변형에 대하여 Monod-type 방법으로 예측하였다.

• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.281-288
• /
• 2016

복합재는 재료 불균질성에 의해 고속 충돌 시 방호성능 자료가 산포한다. 본 연구에서는 다수의 충돌시험으로 복합판재 잔류속도 산포를 확보하고 수치해석으로 예측하는 방법을 정립하였다. 먼저 10개의 동일 시편으로 인장시험을 수행하여 파단변형률 산포를 얻었다. 같은 재료로 제작된 4ply([0/90]s)와 8ply([0/90/0/90]s) GFRP(Glass Fiber Reinforced Plastic) 복합판재에 FSP(Fragment Simulating Projectile) 고속 충돌시험을 동일 조건에서 다수 수행하여 잔류속도 산포를 얻었다. 인장시험에서 얻어진 파단 변형률 분포를 이용하여 수치해석을 수행하였다. 충돌속도는 4ply와 8ply 각각 411.7m/s와 592.5m/s이다. 시험 결과와 비교하여 적절한 잔류속도의 산포를 예측할 수 있었다. 추가적으로 복합판재의 경우 Solid요소 대비 Layered Solid요소로 모델링하면 계산시간이 감소되었다.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1206-1218
• /
• 2016

This article proposes a highly reliable power and communication system that guarantees the protection of essential instruments in a nuclear power plant under a severe accident. Both power and communication lines are established with not only conventional wired channels, but also the proposed wireless channels for emergency reserve. An inductive power transfer system is selected due to its robust power transfer characteristics under high temperature, high pressure, and highly humid environments with a large amount of scattered debris after a severe accident. A thermal insulation box and a glass-fiber reinforced plastic box are proposed to protect the essential instruments, including vulnerable electronic circuits, from extremely high temperatures of up to $627^{\circ}C$ and pressure of up to 5 bar. The proposed wireless power and communication system is experimentally verified by an inductive power transfer system prototype having a dipole coil structure and prototype Zigbee modules over a 7-m distance, where both the thermal insulation box and the glass-fiber reinforced plastic box are fabricated and tested using a high-temperature chamber. Moreover, an experiment on the effects of a high radiation environment on various electronic devices is conducted based on the radiation test having a maximum accumulated dose of 27 Mrad.