• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.182-182
• /
• 2003

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.508-510
• /
• 1995

A fiber-optic pressure sensor is fabricated with a photoelastic glass material. To remove the influence of external pertubation along the optical fiber, a new referencing technique is proposed by using two light sources. LED with 870nm wavelength is used as light source for reference signal, and LED with 660nm wavelength is used as light source for modulation signal. The fiber-optic pressure sensor system shows good linearity within the pressure range of 0 to 5 $kg/cm^2$.

• 한국정보전자통신기술학회논문지
• /
• 제3권4호
• /
• pp.70-75
• /
• 2010

이 논문은 광케이블인 optical fiber를 통해 의료용 signal을 전송 할 때 porarization obtain fiber 에서 mono mode fiber로 교체되는 지점에 integrated optic인 wave conductor를 사용하여, optical signal intensity의 maximum를 sensing 하기 위한 Algorithm Brent을 설계하고 이를 검토하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.111-114
• /
• 2003

A new monitoring system has been developed for in-situ and realtime measurement of ozone transport in unsaturated porous media using a fiber optic sensor. The calibration of the fiber optic transflection dip probe (FOTDP) system was successfully carried out at various ozone concentrations using a column with length of 30 cm and diameter of 5 cm packed with glass beads, which don't react with gaseous ozone. The breakthrough curves (BTCs) of ozone was obtained by converting the normalized intensity into ozone concentration. The FOTDP system reflected the ideal transport phenomena of gas phase ozone at various flow rates. The FOTDP system worked well for in-situ monitoring of gas phase ozone at various water saturations and in presence of SOM. However, the FOTDP system did not measure the ozone concentration at more than 70% water saturation.

• Environmental Engineering Research
• /
• 제10권2호
• /
• pp.71-78
• /
• 2005

A series of column experiments was conducted to develop a monitoring system for in-situ and realtime measurement of ozone transport in unsaturated porous media using a fiber optic sensor. The calibration of the fiber optic transflection dip probe (FOTDP) system was successfully carried out at various ozone concentrations using a column with length of 30 cm and diameter of 5 cm packed with glass beads, which don't react with gaseous ozone. The breakthrough curves (BTCs) of ozone were obtained by converting the normalized intensity into ozone concentration. The FOTDP system worked well for in-situ monitoring of gas phase ozone at various water saturations and in presence of soil organic matter (SOM). However, the FOTDP system did not measure the ozone concentration at more than 70% water saturation.

• 대한전자공학회논문지
• /
• 제22권3호
• /
• pp.43-47
• /
• 1985

본 논문에서는 SF-4 flint glass를 이용한 fiber-optic 전류센서의 가능성을 처음으로 제시하였고 이를 실현하기 위하여 Jones matr항에 의한 이론적 분석과 실험을 하였다. 전류측정센서의 감도를 결정하는 SF-4 flint glass의 verdet 상수는 측정결과 0.0606[min/G·㎝]로 현재 연구 보고된 전류센서용 파라데이 회전자인 FR-5, SF-6 flint glass 및 YIC보다 비교적 작은 간으로 나타났다. 그리고 이론모델을 토대로 전류측정 시스템을 구성하여 100∼600(A)의 상용전류 및 100∼500(C)의 자계를 변화 시킴에 따라 검출기 출력을 측정한 결과 선형적으로 나타났다. 이는 이론적 결과와도 일치함 이 분석 되므로써 본 논문에서는 SF-4 flint 멍ass가 전류센서로서의 응용 가능성을 제시 하였다.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.978-982
• /
• 2010

For mass information transfer, the optical communication using optic fiber has been widely used. Especially, in the field of medical image, the large data is digitalized based on the standard image and it is used for telemedicine with this method. Therefore, to transfer the large amount of data fast and effectively POF (Plastic Optical Fiber) can be used and the development of optic connector for connection between POFs is very important. In this study, for stable optical coupling of POF optic fiber Ferrule and Sleeve were designed and produced by considering the bond stability and the insertion loss according to the physical contact and roughness profile was evaluated. As a result of examining the insertion loss by physical contact method of two optic fibers, it showed the loss was about 1.895dB. According to the results from studying the condition of grinding section for POF mass production, the mass production condition was established as POF profile roughness of 6nm and the loss of 0.2dB or lower by controlling the film size and time step by step.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.919-921
• /
• 2007

A laser thermal printing system was developed to fabricate OLED. A single mode fiber laser beam was diffracted by an acousto-optic modulator. The diffracted beam was sent to a galvanometer to print organic film on ITO glass with resolution of $30\;{\mu}m$.

• 한국광학회지
• /
• 제2권3호
• /
• pp.139-148
• /
• 1991

광섬유를 사용하여 미소 교류자기장 (200Hz-2kHz) 감지를 위한 광섬유 간섭계 자기센서시스템을 구성하였다. 자왜효과(magnetostriction effect)가 큰 비정질 metallic glass(2605SC)를 광섬유에 부착하여 자기장 감지부를 제작하고 방향성 결합기 metallic glass(2605SC)를 광섬유에 부착하여 자기장 감지부를 제작하고 방향성 결합기(directional coupler)를 사용한 광섬유 일체식(all-fiber type)으로 Mach-Zehnder 간섭계를 구성하여 외부 자기장의 변화를 간섭계의 위상변화로 변환시켜 그 크기를 측정하였다. 온도변화, 진동 등 주위환경에서 오는 불규칙한 신호에 의한 간섭계의 신호소멸(signal fading) 문제는 능동 위상추적방법(active phase tracking method)으로 간섭계의 기준 광통로(reference arm)에 위치한 위상 변조기에 보상신호를 되먹임으로써, 직각조건(quadrature condition)을 이루어 안정시켰다. 측정 결과 metallic glass의 주파수 반응특성은 900Hz-2kHz 대역에서 거의 비슷한 경향을 보였으며 최대 감도를 나타내는 직류 바이어스 자기장은 3.5 Oe 였다. 미소 교류자기장에 대한 간섭계의 출력은 $\pm$0.5 Oe 범위 안에서 좋은 선형성을 보였다. 1 kHz 교류자기장에 대한 scale factor S는 8.0 rad/Oe 이었으며 최소감지자기장은 $3X10^{-6} Oe/\sqrt{Hz}$(1Hz detection bandwidth)이었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.40.2-40.2
• /
• 2010

The Solar Daylighting Technology is considered with the plan that will be able to embody the energy technology which is possible to continue. Daylighting has an considerable advantage of the high effectiveness and the various use because daylighting can use the infrared ray, the visible ray and the ultraviolet rays without energy transformation. In this study, the experiment is tried of making the shape and an arrangement of the reflector different After establishing the reflector in the height(10m) which is fixed. It's also researched on the shape of the efficient reflector using the program(Trace Pro) at the time of the autumnal equinox and the winter solstice at fixed hours.