• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.293-296
• /
• 2007

루프 공진기 구조를 가지는 비침습식 혈당 센서 구조를 제작하여 혈당 측정을 위한 민감도 측정을 하였다. 0%와 20%의 글루코스 용액의 전기적 특성을 확인하고, 25mm${\sim}$170mm의 지름을 가지는 링 구조를 이용하여 식염수 중 글루코스 농도에 따른 반사 손실의 차이를 측정하였다. 링 형태 프로브가 혈액과 같은 인체 내부의 물질을 측정하는데 종단 개방 프로브에 비해 유리한 특성을 가지며, 측정 주파수 중 가장 낮은 285MHz에서 S11이 0.94의 차이를 보여, 저주파일수록 민감도가 향상됨을 알 수 있었다.

• 한국인터넷방송통신학회논문지
• /
• 제12권4호
• /
• pp.103-109
• /
• 2012

본 논문은 현재 급격히 증가하는 전력을 효율적으로 관리하고 낭비를 최소화하기 위한 전력 관리 시스템을 제안한다. 기업, 공장, 관공서, 학교 등의 환경에 최적화된 USN(Ubiquitous Sensor Network)을 기반으로 한 산업용 전력관리시스템을 구현하였다. 콘센트에 직접 부착하여 전력량 측정 및 전력제어가 가능하다. 전력센서를 PLC(Power Line Communication)와 TCP/IP 통신을 통하여 하나의 네트워크로 구성하고 전력을 감시 및 제어한다. 수집된 데이터를 기반으로 전력을 효율적으로 유지관리 할 수 있으며, 또한 안드로이드 기반 앱을 통하여 언제 어디서나 서버에 접속하여 전력량을 관리하고 낭비되는 전력을 효율적으로 관리할 수 있는 시스템을 구현하였다.

• Animal cells and systems
• /
• 제13권2호
• /
• pp.119-125
• /
• 2009

Mammalian hibernation is a type of natural adaptation that allows organisms to avoid harsh environment and to increase the possibility of survival. To investigate the molecular link between circadian and hibernating rhythms in the greater tube-nosed bats, Murina leucogaster, we set out to identify circadian genes that are expressed in bats, with specific focus on the PAS domain by using PCR-based screens. We could isolate a eDNA clone, designated as LPAS1, that encodes a protein of 521 amino acid residues. LPAS1 is closely related with CLOCK family with the highest homology to human CLOCK. Based on RT-PCR analyses, LPAS1 transcripts are ubiquitously present in tissues from both summer active and winter dormant periods. Given that LPAS1 is a member of the bHLH-PAS protein superfamily but lacks polyglutamine transactivation domains, it is likely to function as a repressor for endogenous CLOCK to hinder its roles in promoting transcription. Our result will open a new avenue to further examine the functional interconnection between the circadian clock and the circannual clock such as mammalian hibernation.

• 한국정보과학회 언어공학연구회:학술대회논문집(한글 및 한국어 정보처리)
• /
• 한국정보과학회언어공학연구회 2001년도 제13회 한글 및 한국어 정보처리 학술대회
• /
• pp.57-62
• /
• 2001

인터넷의 급속한 양적 증가로 인해 색인어 기반의 검색 방식만으로는 원하는 정보를 찾아 내기가 쉽지 않다. 색인어 기반의 검색 방식에서는 색인어로 나타나지 않는 특징을 이용할 수 없으며, 질적으로 균등한 검색 결과를 제시하지 못하기 때문이다. 따라서 사이트의 여러 가지 특성에 따라 계층적으로 분류해놓은 웹 디렉토리를 이용하거나, 관련 전문가들의 추천 리스트를 이용하여 검객하기도 한다. 본 연구에서는 기존의 색인어 기반의 검색 모델에 웹 디렉토리와 추천 문서 같은 문서간의 링크 정보를 결합할 수 있는 정보 검색 모델을 제시한다. 특정 질의어의 검색 결과로 얻어낸 문서와 그 문서와 연결된 문서 집합을 이용하여 네트워크를 구성한다. 이 네트워크에 검색기가 제시하는 순위와 유사도, 그리고 문서간의 링크 정도를 이용해서 확률값을 정해준다. 그리고 Ergodic Markov Model의 특성을 이용하여 색인어 정보와 링크 정보를 결합한다. 본 연구에서는 특정 문서가 질의어에 부합되는 정도를 사용자가 그 문서로 이동할 확률값으로 계산하는 방식을 보인다.

• Design & Manufacturing
• /
• 제1권1호
• /
• pp.1-5
• /
• 2007

Double injection molding process is very efficient molding-method for molding the products which is consist of multi-materials. Fuel-tube holder which is necessary for automobil power train and circulation systems is composed of plastic and rubber materials to minimize the vibration and pulsation noises. In existing process, fuel-tube holder was made by the insert molding process or assembly process after molding. If fuel-tube holder is manufactured by double injection molding process, it may be realize to improve the product quality, efficiency of molding-process and retrenchment of manufacturing cost. In this study, for manufacturing fuel-tube holder by double injection molding process, the analysis of joining characteristics between PA6(polyamide 6) and TPE(thermoplastic elastomer) was executed and the double injectin mold for molding fuel-tube holder with core toggle mechanism was fabricated. Finally, fuel-tube holder was molding using fabricated double injection mold.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2006년도 춘계 학술대회 발표논문집
• /
• pp.37-40
• /
• 2006

In this paper, we propose a VQ codebook design of speech recognition feature parameters in order to improve the performance of a distributed speech recognition system. For the context-dependent HMMs, a VQ codebook should be correlated with phonetic distributions in the training data for HMMs. Thus, we focus on a selection method of training data based on phonetic distribution instead of using all the training data for an efficient VQ codebook design. From the speech recognition experiments using the Aurora 4 database, the distributed speech recognition system employing a VQ codebook designed by the proposed method reduced the word error rate (WER) by 10% when compared with that using a VQ codebook trained with the whole training data.

• 동의생리병리학회지
• /
• 제17권5호
• /
• pp.1235-1242
• /
• 2003

This study was performed for the investigation of vasodilatory effects of Crataegus pinnatifida Bunge and for isolation and structure determination of the constituent from the active fraction. The fruits of this herbal drug were extracted with 80% methanol, then fractioned successively with methylene chloride, ethylacetate and n-butanol. Among the fractions, ethyl acetate fraction exhibited the most effective vascular relaxation against phenylephrine-induced arterial contraction. In order to isolate the active constituent by activity-guided fractionation, this fraction was chromatographed on silica gel to yield seven subfractions. Among the subfractions, the active one showing the most potent vascular relaxation activity was further separated by prep. HPLC with reversed phase Microsorb C-18 column using 1 % acetic acid and methanol gradient solvent system to afford one pure compound, which revealed a potent vasodilatory effect. Instrumental analyses (NMR and mass spectrometry) of the isolated constituent indicated this compound to be (-)-epicatechin. The vasodilatory action mechanism of this compound should be further investigated.

• 한국진공학회지
• /
• 제5권1호
• /
• pp.62-66
• /
• 1996

$(Ba_{1-x}Sr_xTiO_3$ (BST) thin films have been grown on Pt-coated MgO by metal -organic chemical vapor deposition. X-ray diffraction results showed that BST films were grown on a Pt/MgO substrate with (100) preferred orientation perpendicular to the surface. The lineawr relationship of P-E curve obtained form hysteresis loop measurement indicated that the BST films had a Curie transitions below room temperature . Films deposited at $900^{\circ}C$ exhibited a smooth and dense microstructure, a dielectric constant of 202, and a dissipation facotr of 0.02 at 100kHz. The leakage current density of the BST films is about $2\times10^{-10} \;A/\textrm{cm}^2$$ at an applied electric field of 0.2 MV/cm. The electrical behavior on the current-voltage characteristics is well explained by the bulk-limited Pool-Frenkel emission.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.427-430
• /
• 2006

This paper deals with the internal oscillating flaw in air chamber and duct of an OWC-type wave energy converter by numerical analysis using commercial CFD code, FLUENT. Whole oscillating flaw from OWC-type chamber to outlet through duct was solved by unsteady analysis in order that performance of wave energy conversion was made better. Results show that whole oscillating flaw field of this system in unsteady condition. Duct shape at setting place of turbine is curved with elbow, because profile of inlet condition to turbine is important in its efficiency. This paper is found internal flaw in air chamber and duct. Also, this research was found effect of duct shape.

• 산업기술연구
• /
• 제19권
• /
• pp.135-145
• /
• 1999

This thesis is to investigate the sliding behavior of cantilever retaining wall by using the commercially available program of FLAC to simulate its behavior numerically. Cantilever retaining walls with flat base, sloped base and base with shear key, uniform surcharges being applied on the surface of backfill, were investigated to figure out appropriate location of shear key beneath the base of wall and, thus, its applicability to field condition was assessed by comparing the analyzed results to each other. On the other hand, previously performed centrifuge model test results (Eum, 1996) were analyzed numerically with FLAC to compare test results with respect to characteristics of load-settlement of surcharges and load-lateral movement of wall. Based on the failure mechanism observed during centrifuge tests, limit equilibrium method of finding the ultimate load inducing the sliding failure of wall was used to compare with values of the ultimate load obtained from conventional method of limit equilibrium method. Therefore, appropriate location of shear key was determined to mobilize the maximum resistance against sliding failure of wall.