• Economic and Environmental Geology
• /
• v.44 no.6
• /
• pp.513-523
• /
• 2011

We estimated geothermal power generation potential in Korea through Enhanced Geothermal System (EGS) technology following the recently proposed protocol which was endorsed by international organizations. Input thermal and physical data for estimation are density, specific heat and thermal conductivity measurements from 1,516 outcrop samples, 180 heat production, 352 heat flow, and 52 mean surface temperature data. Inland area was digitized into 34,742 grids of $1'{\times}1'$ size and temperature distribution and available heat were calculated for 1 km depth interval from 3 km down to 10 km. Thus estimated theoretical potential reached 6,975 GW which is 92 times total generation capacity of Korea in 2010. Technical potential down to 6.5 km and considering land accessibility, thermal recovery ratio of 0.14 and temperature drawdown factor of $10^{\circ}C$ was 19.6 GW. If we disregard temperature drawdown factor, which can be considered in estimating economic potential, the technical potential increases up to 56 GW.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.470-475
• /
• 2003

KIGAM (Korea Institute of Geoscience and Mineral Resources) launched a new project to develop the low-enthalpy geothermal water in the area showing high geothermal anomaly, north of Pohang city, for large-scale space heating from KORP (Korea Research Council of Public Science & Technology) funding. Surface geologic and geophysical surveys including Landsat TM image analysis, gravity, magnetic, Magnetotelluric (MT) and controlled-source audio-frequency MT (CSAMT) and self-potential (SP) methods have been conducted and the possible fracture zone was found that would serve as deeply connected geothermal water conduit. By the end of 2003, two test wells of 1 km depth will be drilled and various kinds of borehole survey along with additional MT measurements and sample analysis will follow and then the detailed subsurface condition is to be characterized. Next step would be drilling the production well of 2 km depth and all further steps remain to be determined depending upon the results of the test well studies.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.360-363
• /
• 2006

Regester & Larkin(2005) suggest the issue and risk lifecycle analysis method in risk management, made up of the potential, emerging, current, crisis, and dormant stages. Investment on New & Renewable Energy is meaningful in effect ive risk management for diminishing or reducing the shock of a energy current, at the potential stage. In this study, we survey the risk of traditional fossil fuel projects and develop the risk analysis model for new & renewable energy projects specially geothermal energy resources and gas-hydrate resources.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.209-214
• /
• 2006

In this study, application of groundwater thermal energy by use of riverbank filtration(RBF) system is reviewed and checked as an energy resources. Also, the cooling and heating system using RBF was developed in Chang-Won Waterwork site to examine the feasibility in real operation of the system. We estimates the roughly overall energy obtained from RBF system if the system is used in cooling and heating. The water temperature and room temperature have been monitored to evaluate the efficiency of the system and the preliminary results show that the geothermal energy obtained by RBF could be adopted in cooling and heating energy source efficiently.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.654-664
• /
• 2011

A field campaign of magnetotelluric (MT) and audio-frequency MT (AMT) survey was done at 36 measurement points as a complementary for the previous 44 MT measurements completed during the period of 2005-2006. The purpose of additional MT survey is to investigate the possible fracture system in Seokmo Island, which is conceived to be crucial in accumulation and migration of geothermal hot spring in this area. We have done 2D and 3D inversions of overall MT and AMT data distributed on a grid to interpret subsurface of extended area. The inversion results reveal that at least two major faults are imaged in the inversion results, one of which is in NNE-SWW with steep dip, and another is in E-W direction.

• Analytical Science and Technology
• /
• v.17 no.4
• /
• pp.308-314
• /
• 2004

When the polymer was used for the guard raw materials of electronic device, the content of U, Th and their daughter nuclides were known as a factor of soft error. Because emitted alpha ray could be caused of mis-operation. And ionic impurities such as Cl, Fe, Na could shorten the device life-time. For the analysis of trace impurities in the polymer, neutron activation analysis(NAA) and ICP/AES have been studied. To improve the accuracy and sensitivity of the trace and ultratrace metallic impurities in the epoxy and phenol polymer, sample pretreatment method and optimum analytical condition of NAA were developed. Using the above method, U, Th and other 23 trace impurity elements were analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.693-696
• /
• 2005

KIGAM (Korea Institute of Geoscience and Mineral Resources) launched a new project to develop the low-temperature geothermal water in the area showing high geothermal anomaly, north of Pohang city, for large-scale space heating. Surface geologic and geophysical surveys including Landsat 1M image analysis, gravity, magnetic, Magnetotelluric (MT) and controlled-source audio-frequency MT (CSAMT), and self-potential (SP) methods have been conducted and the possible fracture zone was found that would serve as deeply connected geothermal water conduit. In 2004, two test wells of 1.1km and 1.5km depths have been drilled and various kinds of borehole survey including geophysical logging, pumping test, SP monitoring, core logging and sample analysis have followed. Temperature of geothermal water at the bottom of 1.5km borehole reached over $70^{\circ}C$ and the pumping test showed that the reservoir contained huge amount of geothermal water. Drilling for the production well of 2 km depth is on going. After test utilization and the feasibility study, geothermal water developed from the production well is going to be provided to nearby apartments.

• Journal of Microbiology
• /
• v.41 no.2
• /
• pp.152-156
• /
• 2003

Through enrichment on two nutrient agars, 57 Thermus isolates were recovered from 15 hot spring samples taken from the Rehai geothermal area, Tengchong, China. Unique growth characteristics were observed when the strains were transferred from YIM14 medium to Thermus medium. Phylogenetic analysis showed that the 16S rDNA sequences of the isolates and clones from the Rehai geothermal area farmed a monophyletic group on the phylogenetic tree. A secondary structure comparison showed that their 16S rRNAs have unique secondary structure characteristics.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.2
• /
• pp.25-37
• /
• 2014

The volcanic type of geothermal water is linked intimately to active or potentially active volcanoes and takes place near the plate boundaries. In contrast to the volcanic type, the geothermal water in Korea has a non-volcanic origin. Korea's geothermal water is classified into the residual magma (RM) type and deep groundwater (DG) type according to the criterion of $35^{\circ}C$. This study reviewed the relationship between the physical and chemical features of the 281 geothermal water sources in South Korea in terms of the specific capacity, water temperature, and chemical compositions of two different basements (igneous rock and metamorphic rock) as well as the geological structures. According to the spatial relationship between the geothermal holes and geological faults, the length of the major fault is considered a key parameter determining the movement to a deeper place and the temperature of geothermal water. A negligible relationship between the specific capacity (Q/s) and temperature was found for both the RM type and DG type with the greater specific capacities of the RM- and DG-igneous types than the RM- and DG-metamorphic types. No relationship was observed between Q/s and the chemical constituents ($K^+$, $Na^+$, $Ca^{2+}$, $Mg^{2+}$, $Zn^{2+}$, $Cl^-$, $SO_4{^{2-}}$, $HCO_3{^-}$, and $SiO_2$) in the DG-igneous and DG-metamorphic types. Furthermore, weak relationship between temperature and chemical constituents was found for both the RM type and DG type.

• Economic and Environmental Geology
• /
• v.38 no.1
• /
• pp.79-89
• /
• 2005

Groundwater level changes in coastal aquifers occur due to oceanic tides, where the properties of oceanic tides can be applied to estimate hyadraulic parameters. Hydraulic parameters of coastal aquifers located in eastern part of Jeju island were estimated using the tidal response technique. Groundwater level data from a saltwater intrusion monitoring well system was used which showed tidal effects from 3 to 5 km. The hydraulic gradient was assessed by utilizing the filtering method from 71 consecutive hourly water-level observations. Calculated hydraulic diffusivity ranged from 2.94${\times}10^7m^2d^{-1}$ to 4.36${\times}10^7m^2d^{-1}$ . The hydraulic gradient of the coastal aquifer area was found to be ~$10^{-4}$, whereas the gradient of the area between wells Handong-1 and 2 was found to be ~$10^{-6}$, which is very low comparatively. Analysis of groundwater monitoring data showed that groundwater levels are periodically higher near coastal areas compared to that of inner land areas due to oceanic tide influences. When assessing groundwater flow direction in coastal aquifers it is important to consider tidal fluctuation.