• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2048-2053
• /
• 2005

The aim of this paper is to compensate hysteresis phenomena in Shape Memory Alloy (SMA) actuators by using numerical inverse Preisach model. This is used to design a controller that correct hysteresis effects and improve accuracy for the displacement of SMA actuators. Firstly, hysteresis is identified by numerical Preisach model implementation. The geometrical interpretation from first order transition curves is used for hysteresis modeling. Secondly, the inverse Preisach model is formulated and incorporated in open-loop control system in order to obtain desired input-output relationship with hysteresis reducing. The experimental results for hysteresis compensation by using this method are also shown in this paper.

• Fibers and Polymers
• /
• 제5권3호
• /
• pp.177-181
• /
• 2004

Current efforts to establish links between geometrical features and mechanical performance of nonwoven fabrics in general, and of point-bonded (spot-bonded) nonwovens in particular has been made using the measurements of Fiber Orientation Distribution Function (ODF) and tensile modulus which occurs during controlled-deformation experiments. Image analysis technique (using the Fast Fourier Transform) was used to quantify the fiber orientation distribution. The results suggest that, within a typical window of processing conditions, the fiber orientation has a significant influence on the anisotropical behavior of nonwoven. The data also suggest that mechanical anisotropy of thermally point-bonded nonwovens is likely to be governed by different load transfer mechanism according to the applied macroscopic tensile direction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.400-404
• /
• 1997

This paper presents spatial relationshaps and engineering features for the feature based modeling of Sheet Metal Weld Assemblies (SMWA) that are made of sheet metal components through are welding processes. Spatial relationships in ProMod-S, a sheet metal product modeler,are further extended for the SMWA modeling. Some spatial relationships for special weld joint types are newly introduced. The geometrical and topological relations between spatial reationship, mating features, and assembly features are defined. Finally, assembly data stucturess for the product modeling of SMWA are proposed. They are an engineering relation to represent the constraints between component features, and a mating bond to integrate component design information.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.769-776
• /
• 2000

RP(Rapid Prototyping) technology is gaining its popularity in building a prototype in all industries. SLS(Slective Laser Sintering) is one of RP technologies, which is focused on tooling processes as well as three dimension solid model. There are several factors, the length and the cross-sectional area of a part, that have an effect on build setup in SLS process. In this paper, the computation on geometrical relationship is used to slice STL file and to estimate these factors. Based on these values, the build setup parameters such as the heating temperature, the laser power, and the powder cartridge feed rate are determined by neural network approaches. The test results show that the computation time is saved and the neural network approach is able to apply to get the optimal parameters of build process within an acceptable error rate.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.35-40
• /
• 2009

This paper presents the geometrical analysis of an inclined ultra-precision grinding technology using simulations about grinding point locus for micro lens manufacturing. Simulation results show the relationship between radius ratios ($R_1/R_2$) and wheel center locus. Furthermore, the critical grinding wheel radius ($R_1$) can be calculated from work-piece radius ($R_2$) and inclined angle ($\theta=-45^{\circ}$). These achievements could be applied to calculate CNC data in ultra-precision grinding and give insight for wheel wear and compensation grinding.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.83-86
• /
• 2003

This paper suggests user's interface with computer by means of detecting gaze under HMD, head mounted display, environment. System is derived as follows; firstly, calibrate a camera in HMD, which determines geometrical relationship between monitor and captured image. Second, detect the center of pupil using algorithm of the center of mass and represent a gazing position on the computer screen. If user blinks or stares at a certain position for a while, message is sent to computer. Experimental results show the center of mass is robust against glint effects, and detecting error was 7.1%. and 4.85% in vertical and horizontal direction, respectively. To adjust detailed movement of a mouse takes 0.8 sec more. The 98% of blinking is detected successfully and 94% of clicking detection is resulted.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.634-642
• /
• 2006

The aim of this paper is to increase the performance of hysteresis compensation for Shape Memory Alloy (SMA) actuators by using inverse Preisach model in closed-loop control system. This is used to reduce hysteresis effects and improve accuracy for the displacement of SMA actuators. Firstly, hysteresis is identified by numerical Preisach model implementation. The geometrical interpretation from first order transition curves is used for hysteresis modeling. Secondly, the inverse Preisach model is formulated and incorporated in closed-loop PID control system in order to obtain desired current-to-displacement relationship with hysteresis reducing. The experimental results for hysteresis compensation by using this method are also shown in this paper.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.67-70
• /
• 2009

This paper proposes an algorithm for creating stereoscopic video from a monoscopic video. A viewer uses depth perception clues called a vanishing point which is the farthest from a viewer's viewpoint in order to perceive depth information from objects and surroundings thereof to the viewer. The viewer estimates the vanishing point with geometrical features in monoscopic images, and can perceive the depth information with the relationship between the position of the vanishing point and the viewer's viewpoint. In this paper, we propose a method to estimate a vanishing point with edge direction histogram in a general monoscopic image and to create a depth map depending on the position of the vanishing point. With the conversion method proposed through the experiment results, it is seen that stable stereoscopic conversion of a given monoscopic video is achieved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.17-17
• /
• 2000

In this paper, we design a hybrid controller for a safe lane change maneuver in automated highway systems(AHS). The proposed hybrid controller consists of a supervisor which controls the behaviors of discrete-event dynamic systems, and a regulator which controls the operations of continuous-variable dynamic systems. The supervisor determines whether the system starts a maneuver or not, via a condition for a safety, and gives orders to the regulator for performing the maneuvers. And the regulator tracks the planned path generated in the supervisor. The conditions for a safe lane change maneuver are proposed using the velocity, the acceleration, and geometrical relationship of vehicles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.301-302
• /
• 2006

In this paper, the possibilities of the Infra-red sensor in sensing and control of the bead geometry in the automated welding process are presented. Infra-red sensor is a well-known method to deal with the problems with a high degree of fuzziness so that the sensor is employed to build the relationship between process variables and the quality characteristic the proposed above respectively. Based on several neural networks, the mathematical models are derived from extensive experiments with different welding parameters and complex geometrical features. The developed system enables to select the optimal welding parameters and control the desired weld dimensions during arc welding process.