• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1679-1683
• /
• 2007

Stainless steel sheets are widely used as the structure material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding. For fatigue design of gas welded joints such as fillet and plug and ring type joint, it is important to obtain optimum design parameter information on gas welded joints. In this paper, analysis approach for fatigue test using experimental design are evaluated optimum factor in gas welded joint type and geometrical parameters of materials. Using these results, that factors applied to fundamental information for fatigue design.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.245-250
• /
• 1999

In this study, the development of graphic user interface(GUI) program for optimum design of RC continuous beam is dealt. Optimum design problem that satisfies strength, serviceability, durability and geometrical conditions is formulated as a non-linear programming problem(NLP) in which the objective function as well as the constraints are highly non-linear on design variables such as cross sectional dimensions and steel ratio. Optimum design problem is solved by NLP techniques namely, sequential linear programming(SLP), sequential convex programming(SCP). Numerical examples of R.C. continuous beam using GUI system are given to show usefulness of GUI system for practical design work and efficiency of algorithm for the NLP techniques.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.434-440
• /
• 2000

This study is focused on the performance prediction and design of the centrifugal pump with optimum shape. Design and analysis of centrifugal pump rely on experience of designer due to many fluid mechanical and geometrical variables. In this study, a design method was developed with experimental factors and analysed the method by comparition with 2nd-order vortex panel method. Impeller is the most important component affecting the performance of the centrifugal pump. The predicted total head for three cases, of which designs were determined by this method, agrees well with a particular commercial pump. This study shows that satisfactory performance of an optimal pump shape can be obtained through the automatic design routine.

• Journal of Welding and Joining
• /
• v.28 no.4
• /
• pp.49-54
• /
• 2010

Stainless steel sheets are widely used as the structural material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the GMAW (gas metal arc welding). For fatigue design of GMA welded joints such as fillet and plug, ring type joint, it is important to obtain optimum design factor information on GMA welded joints. in this paper, analysis approach for fatigue test using design of experiment are evaluated optimum factor in GMA welded joint type and geometrical parameters of materials. Using these results, that factors applied to fundamental information for fatigue design.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.151-155
• /
• 2010

This paper describe the optimal design of geodetic network by analytical technique based on the quality criteria of network. We described an example of geodetic network design taking into account the precision, reliability and strength that are the main criteria of network design. The main goal of this paper is to evaluate the criteria to design the geodetic network coinciding with the criteria of geometrical strength and high reliability. From this study, the result shows relatively weaker strength in marginal part than the center of network. This indicated that the precision of observation in marginal part is relatively lower than the center.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.125-127
• /
• 2001

Switched reluctance motor (SRM) has some advantages such as low cost, high torque density etc. However SRM has inevitably high torque ripple due to the double salient structure. To apply SRM to industrial field, we have to minimize torque ripple, which is the weak-Point of SRM. This paper presents optimal design process of SRM using numerical method such as 2D finite element method (FEM) and 3D equivalent magnetic circuit network method (EMCNM). The electrical and geometrical design parameters have been adopted as 2D design variables. The overhang structure of rotor has been also adopted as 3D design variable. From this work, we can obtain the optimal design, which minimize the torque ripple and maximize energy conversion loop.

• Korean Journal of Human Ecology
• /
• v.10 no.4
• /
• pp.399-409
• /
• 2001

The purpose of this study was to evaluate the preference of image for modern application of Korean traditional patterns. A survey was conducted using the random selection among female undergraduate students in Daegu city. The degree of interest and preference in Korean traditional style or something like that measured by 5 scale method. And then they were classified into two groups which were interest/non-interest group, and preference/non-preference group. The image of Korean traditional patterns consisted of semantic differential scales. Frequency, percentage and mean were analyzed, for difference of groups t-test was analyzed. The results were as fellows; 1. For the degree of interest for Korean traditional patterns, it was showed that 53.8% of total respondents took interest and about 40.4% of them had preference for traditional patterns. the correlation coefficient of the degree of interest and preference was 0.782(p<0.01) and showed that the positive correlation was high. 2. Among 20 kinds of Korean traditional patterns, the degree of preference for the patterns of plants and nature was quite high whereas that for the patterns of geometrical things was low relatively. 3. It was evaluated that pattern of nature was fresh, refined and womanly image generally. It was evaluated that pattern of plants was womanly, fresh, weak, light and soft image and that of animals was heavy, splendid, high-class, manly, strong and positive image. It was evaluated that pattern of geometrical things was the most refined image and high-class, rigid and strong. 4. The statistical significance of mean between interest/non-interest group was showed statistically in the patterns of clouds, mountains, lotus, apricot, orchid, dragon, phoenix and bogey. In case of pattern of orchids, the degree of preference was most different between interest/non-interest group. 5. The pattern of plants showed the most different evaluation for images between interest/non-interest group. For refined/old-fashioned polar adjective images, the interest group evaluated the pattern of plants more refined. 6. For pattern of orchids, the difference of degree of preference between preference/non-preference group was most remarkable in Korean traditional patterns. 7. The pattern of geometrical things showed the most different evaluation for images between preference/non-preference group. For warm/cool polar adjective images, the preference group evaluated the pattern of geometrical things cooler.

• Structural Engineering and Mechanics
• /
• v.58 no.3
• /
• pp.555-576
• /
• 2016

In this paper an efficient approach is introduced for design and analysis of double-layer grids including both geometrical and material nonlinearities, while the results are compared with those considering material nonlinearity. Optimum design procedure based on Enhanced Colliding Bodies Optimization method (ECBO) is applied to optimal design of two commonly used configurations of double-layer grids. Two ranges of spans as small and big sizes with certain bays of equal length in two directions are considered for each type of square grids. ECBO algorithm obtains minimum weight grid through appropriate selection of tube sections available in AISC Load and Resistance Factor Design (LRFD). Strength constraints of AISC-LRFD specifications and displacement constraints are imposed on these grids.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1601-1611
• /
• 2007

In this paper, we presented geometric CAD watermarking scheme for Architectural design drawings using line, arc, and circle components to prevent infringement of copyright from unlawfulness reproductions and distribution. The conventional CAD watermarking scheme can be applied to both line and arc components. But the proposed scheme consists of line, arc and circle watermarking schemes for three basic components of CAD design. After extracting line, arc and circle components from designed drawing, the watermark is embedded into the length of Line component, the angle of arc component, and the radius of circle component considering the robustness against various geometric transformations. The embedding strengths in each component are determined to be preserving the transparency of the watermark. By experimental result, we confirmed the robustness and the invisibility of embedded watermarks in several conversions of architectural design drawing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.57-60
• /
• 2003

An axisymmetric compressible flow solver accounting for chemical equilibrium has been developed as an analysis tool exclusively suitable for performance prediction and optimum contour design of LRE thrust chamber. By virtue of several features focusing on user-friendliness and effectiveness including automatical grid generation and iterative calculations with changes in design parameters prescribed through only one keyword-type input file, a design engineer can evaluate very fast and easily the influences of various design inputs such as geometrical parameters and operating conditions on propulsive performance. Validations have been carried out for various aspects by detailed comparisons with the result of CEA code, experimental data of JPL nozzle, actual data for two historical engines, and ReTF data for KSR-III.