• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.83-88
• /
• 2000

multi-beam optical drive is a method to improve the data transfer rate for the optical disc systems by parallel recording and reading on neighboring multi-tracks. In this paper, the beam rotating actuator, which is necessary for the multi-bean optical disc drive to from beam spots on multi-tracks simultaneously, has been developed. The Voice Coil Motor is used as a drive mechanism for high resolution and small size of the actuator. And rotating guide based on link structure is designed for frictionless and axisless rotation of rotating part including dove prism and for rotating in axis of geometric center of dove prism. The characteristics of the actuator are experimented by laser vibrometer, Polytec OFV1102 and a dynamic analyzer, HP35670A. It shows that the actuator has good linearity, rotating range $\pm0.34^\circ$, minimum rotating angle $0.0066^\circ$and natural frequency 113.9Hz. Therefore the actuator can be applied in a multi-beam optical disc system.

• 소성∙가공
• /
• 제32권6호
• /
• pp.360-366
• /
• 2023

This study is concerned with the surface quality of products according to the material and coating condition of the forming tool in incremental sheet forming. Three forming tools, SKD11 with and without diamond-like-coating (DLC) and polymer tool tip, were used to form conical and pyramidal geometries to take into account the influence of friction between the forming tool and the sheet on the surface quality including geometric accuracy of deformed samples. Each test was performed using SUS304 with a thickness of 0.4 mm according to different incremental depths per lap of 0.5 mm, 1.0 mm, and 1.5 mm for the contour tool path, considering the increase in normal force which is associated with the frictional behavior during local deformation. The surface quality was then investigated through surface roughness measured with KEYENCE VR-6000 and relative strain distribution including deformed shape analyzed with ARGUS which is a non-contact optical strain measurement system. Differences between 3D CAD surfaces and captured geometry from experiments were evaluated to compare the effect of friction on geometric accuracy. From comparisons of experimental results, it was revealed that the polymer-based tool tip can improve surface quality and geometric accuracy by reducing the undesired material flow due to local friction in the increment sheet forming process.

• 한국광학회지
• /
• 제33권6호
• /
• pp.317-323
• /
• 2022

본 논문에서는 투명한 물질의 두께를 측정하기 위한 방법으로 기하 위상 렌즈 기반의 색공초점 센서를 개발하고, 성능 개선을 위한 보정 방법을 제시한다. 일반적인 색공초점 센서의 복잡한 설계로 인한 한계를 극복하기 위해, 기하 위상 렌즈를 이용하여 전체 시스템의 크기를 줄이고, 시스템 오차를 보상하기 위한 파장 첨두 위치 추출 방법과 계통 오차 제거 방법을 설명한다. 색공초점 센서를 이용하여 투명한 물질의 두께를 측정하기 위한 이론을 설명하고, 이를 사파이어 및 BK7 물질의 두께를 측정함으로써 실험적으로 검증한다. 색공초점 센서를 이용한 두께 측정 방법은 기존의 간섭계 및 공초점 센서의 방법들에 비해 측정 속도가 빠르고, 분산 등에 의한 두께 측정 영역 제한이 없기 때문에 많은 응용이 가능하다.

• 한국광학회지
• /
• 제5권1호
• /
• pp.25-30
• /
• 1994

투명한 비등방성 매질의 편광투과특성을 나타내는 유니타리 존즈행렬과 뽀앙카레공의 표면에서의 회전변환이 일대일 대응되는 것을 보여주는 공식을 끌어내었다. 이 공식들을 쓰면 유니타리 존즈행렬의 세 매개변수로부터 이에 대응되는 회전변환의 회전축 방향과 회전각을 보여주는 벡터표현을 얻을 수 있고, 또 거꾸로 회전변환의 벡터표현으로부터 이에 대응디는 유니타리 존즈행렬의 매개변수를 결정할 수 있다. 빛이 투명한 비등방성 선형매질을 지날 때 편광상태의 변화를 살펴보려면 먼저 매질전체의 편광투과특성을 나타내는 존즈행렬을 계산하고, 이로부터 뽀앙카레공에서의 회전변환을 결정하여 뽀앙 카레공 위의 점들이 어떻게 회전이동하는가 보면 된다.

• 한국멀티미디어학회논문지
• /
• 제21권7호
• /
• pp.745-754
• /
• 2018

Language is an essential tool for verbal and emotional communication among human beings, enabling them to engage in social interactions. Although a majority of hearing-impaired people can speak; however, they are unable to receive feedback on their pronunciation most of them can speak. However, they do not receive feedback on their pronunciation. This results in impaired communication owing to incorrect pronunciation, which causes difficulties in their social interactions. If hearing-impaired people could receive continuous feedback on their pronunciation and phonation through lip-reading training, they could communicate more effectively with people without hearing disabilities, anytime and anywhere, without the use of sign language. In this study, the mouth area is detected from videos of learners speaking monosyllabic words. The grayscale information of the detected mouth area is used to estimate a velocity vector using Optical Flow. This information is then quantified as feature values to classify vowels. Subsequently, a system is proposed that classifies monosyllables by algebraic computation of geometric feature values of lips using the characteristics of articulatory phonation. Additionally, the system provides feedback by evaluating the comparison between the information which is obtained from the sample categories and experimental results.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• 한국광학회지
• /
• 제26권1호
• /
• pp.17-22
• /
• 2015

재귀 반사체(Retro Reflector)는 그 반사특성을 살려 베네치안 블라인드 슬랏, 디스플레이, 그리고 교통 안전 분야 등에서 활용 영역이 넓어져 가고 있다. 재귀 반사율 분포를 조절할 수 있는 코너 큐브 재귀 반사체를 정의하고, 입사각도에 따라 그 재귀반사광의 특성을 분석하여 교통 안전 분야에 적용하고자 하였다. 특성 분석 결과를 용이하게 파악할 수 있도록 시각화한 특성 도표를 고안하였으며, 이를 이용하여 다양한 교통 안전 분야의 재귀 반사 시트를 정량적으로 설계할 수 있음을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.454-459
• /
• 2013

For the purpose of rapid development and superior design quality assurance, sophisticated finite element model for SOM(Spatial Optical Modulator) piezo actuator of MOEMS device has been developed and evaluated for the accuracy of dynamics and residual stress analysis. Parametric finite element model is constructed using ANSYS APDL language to increase the design and analysis performance. Geometric dimensions, mechanical material properties for each thin film layer are input parameters of FE model and residual stresses in all thin film layers are simulated by thermal expansion method with psedu process temperature. $6^{th}$ mask design samples are manufactured and $1^{st}$ natural frequency and 10V PZT driving displacement are measured with LDV. The results of experiment are compared with those of the simulation and validate the good agreement in $1^{st}$ natural frequency within 5% error. But large error over 30% occurred in 10V PZT driving displacement because of insufficient PZT constant $d_{31}$ measurement technology.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.494-498
• /
• 2016

In this paper, we proposed the 3-dimenstional (3D) analysis for calculating the optical characteristics of an autostereoscopic display with electric field driven liquid crystal (ELC) lens. From 3D analysis considering the slanting of lens, we calculate the cross-talk of each images and the distortion of viewing zone. Using geometric opics and extended Jones matrix method (EJMM), phase retardation of ELC lens according to position is calcuated and then optical path difference in 3D space considering tilt and azimuth angle of incident light is gotten. Then, intensity distribution is presented in the space. Through camparing the intensity distribution using ideal lens with the ELC lens, we identify the noise and image distortion of ELC lens. As a result, this analysis is expected to provide optimum design conditions for realistic and rigorous 3D display with ELC lens.

• Corrosion Science and Technology
• /
• 제19권5호
• /
• pp.239-249
• /
• 2020

The characteristics of cavitation-erosion damage with changes in the amplitude of 5052-O aluminum alloy for ships were investigated in a seawater environment. In the cavitation-erosion experiment, the cavitation environment was created using a vibration-generating device with a piezo-electric effect. The amplitudes of 5 ㎛, 10 ㎛, and 30 ㎛ were created by changing the geometric shape of the cavitation horn. The resistance characteristics of cavitation-erosion damage were evaluated by weight loss and pitting area. The damaged surface was analyzed using scanning electron microscopy (SEM) and 3D optical microscopy. As the amplitude increased, the amount of damage and the area of the damaged surface increased, and the damage was concentrated at the center and edge of the specimen. The pit was created after the initial incubation period with increasing experimental time, and then the pits were merged to grow and propagate into craters, and eventually, the surface was detached and damaged. The cavitation-erosion damage after 30 minutes with amplitude of 10 ㎛ and 30 ㎛ was 1.48 and 2.21 times compared to 5 ㎛, respectively.