• Journal of the Korean Geosynthetics Society
• /
• v.5 no.2
• /
• pp.39-44
• /
• 2006

The resistance of flexible PVC geomembranes to leachate chemicals is an important factor when PVC geomembranes are being considered as a barrier layer in a composite liner system. This paper describes laboratory test results that evaluate the chemical compatibility of a 0.76 mm (30 mil) thick flexible PVC geomembrane exposed to a synthetic municipal solid waste (MSW) leachate. Changes in dimensional, physical, and mechanical properties were measured after exposure to the synthetic MSW leachate at $23^{\circ}C$ and $50^{\circ}C$ for 30, 60, 90, and 120 days. Although some variability of the test results is observed due to experimental factors and product variability, the synthetic MSW leachate did not significantly degrade the physical or mechanical properties of the flexible PVC geomembrane. As a result, this paper will conclude the PVC geomembranes are not adversely affected by the synthetic MSW leachate.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.10a
• /
• pp.307-314
• /
• 1997

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.11a
• /
• pp.117-126
• /
• 1997

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.1-25
• /
• 2003

geosynthetles -A manufacturerl synthetic product used with soil, rock or other materials to enhance the performance of geotechnical works geotentiles - A permeable textile product used in contact with a soil for separation, filtration, reinforcement and drainage geemembranes - A synthetic low permeability material used as liner in geotechnical applications. (omitted)

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.131-149
• /
• 1999

It was found that surface roughness has a first-order effect on the interface shear strength and accordingly it should be accurately quantified if its role is to be properly understood. To quantify the surface topography, first of all, a variety of commonly used surface roughness parameters and profiling methods were reviewed in this study. Based on this review, the normalized roughness parameter. $R_n$(Uesugi and Kishida, 1986), the profile roughness parameter, $R_L$, and the surface roughness parameter, $R_n$(Dove and Frost, 1996), were selected to be appropriate candidates of roughness parameters and the digital image analysis based Optical Profile Microscopy(OPM) method(Dove and Frost, 1996) to be an appropriate profiling method for this study. Using a smooth and three textured HDPE geomembranes which encompass the range of textures and texture patterns commonly used, a series of roughness measurements on virgin and previously used geomembranes were performed. The results showed that both $R_L\; and\; R_S$ values appropriately reflect the degree of texturing for the geomembranes used in this study, however, $R_n$ value showed limited ranges of variation which may not be sufficient to permit distinction between roughness values for certain conditions. The results of this study will be extended to the investigation of the influence of surface roughness on interface strength in future study.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.203-209
• /
• 2011

Two smooth and textured surfaced HDPE geomembranes (GMs) were cut into dumbbell shape and notched where depth of the notch produced a ligament thickness of 10% to 90% of the nominal thickness with the specimen at 10% interval. A series of laboratory simulation test for installation damage were carried out at different loading cycles on HDPE GMs in accordance with ISO 10722 test method and the effect of number of loading cycle on installation damage was compared. It was found that yield stress and elongation at yield point decreased gradually as the notch depth was increased. Both installation damaged and notched, GMs were used to understand stress crack behavior and this behavior was observed through NCTL test at $50{\pm}1^{\circ}C$ at different yield stresses immerging in pH 4 and pH 12 buffer solutions. Over 35% tensile load, GMs became vulnerable to stress cracking. Both damaged and notched GMs showed the same trend. Especially, notched GMs showed less strength than installation damaged GMs at every stress cracking test condition.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.235-238
• /
• 2003

폐기물 매립시스템은 크게 폐기물의 토양으로의 유출에 의한 오염방지를 위한 lining system과 폐기물에서 발생하는 가스의 방출차단과 빗물의 매립시스템으로의 침투방지를 위한 covering system으로 나뉘어진다. Lining system은 폐기물 하부에 차수층, 침출수 배수층, 침출수 차단층과 차수재 보호층 순으로 구성되며, covering system은 폐기물 상부에 집수관을 설치한 후 중간 복토층을 둔 후, 가스 차단층, 봉합층, 배수장치와 보호층 순으로 구성되어진다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.329-332
• /
• 2002

고밀도 폴리에틸렌(HDPE, High Density Polyethylene) 지오멤브레인은 독성 폐기물 처리시설에서 차수재로 광범위하게 이용되고 있으며, 열이나, 자외선, 그리고 산소와 화학약품에 노출되었을 때의 내구성이 장기성능에 커다란 영향을 미친다 어떤 원인에 의해서 지오멤브레인이 산화될 경우에는 지오멤브레인의 파괴가 가속화되어 구조 시스템의 안정성을 저하시키는 심각한 현상이 발생하게 된다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.267-268
• /
• 2007

See Full Text

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.428-431
• /
• 2001

토목합성재료(Geosynthetics) 중 배수용으로 사용되는 재료는 기능상 유체의 흐름을 수평방향으로 유도하는 재료를 의미하며, 일반적으로 저장된 유체를 수직으로 이동시키는 필터기능을 가지는 1,000g/㎡ 미만의 지오텍스타일(geotextiles)과 수평방향의 유도로를 확보한 지오네트(geonets)를 결합시킨 지오네트 복합제품이 사용되고 있다. 이러한 배수용 토목합성재료는 쓰레기 매립장의 건설 시 침출수의 외부유출을 차단하기 위하여 설치하는 차수막인 지오멤브레인(geomembranes)을 매립된 쓰레기 하중 및 외부의 충격으로부터 보호하는 용도로 사용된다. (중략)