• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.423-434
• /
• 2009

In recent years, the urban thermal environment has become worse, such as days on which the temperature goes above $30^{\circ}C$, sultry nights and heat stroke increase, due to the changes in terrestrial cover such as concrete and asphalt and increased anthropogenic heat emission accompanied by artificial structure. The land use type is an important determinant to near-surface air temperature. Due to these reasons we need to understand and improve the urban thermal environment. In this study, the fifth-generation Pennsylvania State University-National Center for Atmospheric Research Mesoscale Model(MMS) was applied to the metropolitan of Daegu area in order to investigate the influence of land cover changes and urban modifications increase of Albedo to the surface energy budget on the simulated near-surface air temperature and wind speed. The single urban category in existing 24-category U.S. Geological survey land cover classification used in MM5 was divided into 6 classes to account for heterogeneity of urban land cover. As a result of the numerical simulation intended for the metropolitan of Daegu assumed the increase of Albedo of roofs, buildings, or roads, the increase of Albedo (Cool scenario)can make decrease radiation effect of surface, so that it caused drops in ambient air temperature from 0.2 to 0.3 on the average during the daylight hours and smaller (or near-zero) decrease during the night. The Sensible heat flux and Wind velocity is decreased. Modeling studies suggest that increased surface albedo in urban area can reduce surface and air temperatures near the ground and affect related meteorological parameters such as winds, surface air temperature and sensible heat flux.

• Atmosphere
• /
• v.19 no.2
• /
• pp.169-182
• /
• 2009

To improve the performance of climate and numerical models, concerns on the land-atmosphere schemes are steadily increased in recent years. For the realistic calculation of land-atmosphere interaction, a land surface information of high quality is strongly required. In this study, a new land cover map over the Korean peninsula was developed using MODIS (MODerate resolution Imaging Spectroradiometer) data. The seven phenological data set (maximum, minimum, amplitude, average, growing period, growing and shedding rate) derived from 15-day normalized difference vegetation index (NDVI) were used as a basic input data. The ISOData (Iterative Self-Organizing Data Analysis), a kind of unsupervised non-hierarchical clustering method, was applied to the seven phenological data set. After the clustering, assignment of land cover type to the each cluster was performed according to the phenological characteristics of each land cover defined by USGS (US. Geological Survey). Most of the Korean peninsula are occupied by deciduous broadleaf forest (46.5%), mixed forest (15.6%), and dryland crop (13%). Whereas, the dominant land cover types are very diverse in South-Korea: evergreen needleleaf forest (29.9%), mixed forest (26.6%), deciduous broadleaf forest (16.2%), irrigated crop (12.6%), and dryland crop (10.7%). The 38 in-situ observation data-base over South-Korea, Environment Geographic Information System and Google-earth are used in the validation of the new land cover map. In general, the new land cover map over the Korean peninsula seems to be better classified compared to the USGS land cover map, especially for the Savanna in the USGS land cover map.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.265-277
• /
• 2015

Automatic dependent surveillance-broadcast (ADS-B) is the core technology of communication, navigation and surveillance/air traffic management (CNS/ATM), automatically broadcasts its own position information using GNSS and has an advantage of lower geological constraints and faster update speed compared with legacy radar systems. EUROCONTROL defined all purpose structured eurocontrol surveillance information exchange (ASTERIX) CAT.021. ASTERIX CAT.021 is modified several times, but it has compatibility issues with previous version of it. In this paper, we have designed an efficient message processing module regardless of the version of ASTERIX CAT.021. This implemented module generates patterns to collect messages received from the network, after that, received messages are processed in the routine that is defined in accordance with the patterns.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.4
• /
• pp.78-88
• /
• 2003

The land use changes from non-urban areas to urban areas lead to the increased impervious areas, consequently increased direct runoff and higher peak runoff. Urban areas have also been recognized as significant sources of Nonpoint Source (NPS) pollution, while agricultural activities have been known as the primary sources of NPS pollution. Many features of the L-THIA/NPS GIS, L-THIA/NPS WWW system have been enhanced to provide easy-to-use system. The L-THIA model was applied to the Little Eagle Creek (LEC) watershed in Indiana to evaluate the accuracy of the model. The L-THIA/NPS GIS estimated yearly direct runoff values match the direct runoff separated from U.S. Geological Survey stream flow data reasonably. The $R^2$ and Nash-Sutcliffe values are 0.67 and 0.60, respectively. The L-THIA estimated runoff volume and total nitrogen loading for each land use classification in the LEC watershed were computed. The estimated runoff volume and total nitrogen loading in the LEC watershed increased by 180% and 270% for the 20 years. Urbanized areas -"Commercial", "High Density Residential", and "Low Density Residential"- of the LEC watershed made up around 68% of the 1991 total land areas, however contributed more than 92% of average annual runoff and 86% of total nitrogen loading. Therefore, it is essential to consider the impacts of land use change on hydrology and water quality in land use planning of urbanizing watershed.nning of urbanizing watershed.

• Journal of Environmental Impact Assessment
• /
• v.5 no.2
• /
• pp.33-47
• /
• 1996

To select the criteria, literature review was made in the quantitative case of conservation biology, foreign country's EIA and domestic ecology. Among them, a few factors was extracted. To applicate the criteria to domestic forest ecosystem, expert opinion survey was executed to the ecologist. The results were summarized as follows; 1. Classification of sites was made of land use system which is related to forest ecosystem or forest conservation. Sites are divided into 3 categories which are nature preservation area, seminature preservation area and urbanized area. Evaluation criteria is consisted of rarity and naturalness. 2. Each area had different criteria composition according to the site characteristics. Criteria of nature preservation area is rarity in the broad sense (distribution pattern of vegetation), vegetation size, successional stage and depth of organic matters. Those of seminature preservation area are rarity in the broad sense (distribution area of vegetation), vegetation size, successional stage, diameter at breath height and depth of organic matters. And those of urbanized area are vegetation distribution in area, successional stage, age of forest and diameter of breath height. The basic data of criterion was gathered by field survey. 3. Evaluation index and total naturalness index was obtained by adding the each criterion. It is made up of two categories-rarity and naturalness. TNi is divided into 3 grades. Grade I is more than 70% for TNi, grade IT is 50~70%, and grade III is below 50%. According to the each grade, permitted action and facilities were suggested.. This research just focuses on the evaluation of vegetation quality and the assessment results do not directly judge conservation or development. To make better evaluation criteria, various fields of forest ecosystem-geological or physical nature environment and fauna ecosystem etc. -will be added wholly to this research.

• Geotechnical Engineering
• /
• v.10 no.3
• /
• pp.79-96
• /
• 1994

A tunnel design expert system entitled NESTED is developed using the artificial neural network. The expert system includes three neural network computer models designed for the stability assessment of underground openings and the estimation of correlation between the RMR and Q systems. The expert system consists of the three models and the computerized rock mass classification programs that could be driven under the same user interface. As the structure of the neural network, a multi -layer neural network which adopts an or ror back-propagation learning algorithm is used. To set up its knowledge base from the prior case histories, an engineering database which can control the incomplete and erroneous information by learning process is developed. A series of experiments comparing the results of the neural network with the actual field observations have demonstrated the inferring capabilities of the neural network to identify the possible failure modes and the support timing. The neural network expert system thus complements the incomplete geological data and provides suitable support recommendations for preliminary design of tunnels in rock masses.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.893-906
• /
• 2017

Automatic large scale soil model generation is very critical stage for earthquake hazard simulation of urban areas. Manual model development may cause some data losses and may not be effective when there are too many data from different soil observations in a wide area. Geographic information systems (GIS) for storing and analyzing spatial data help scientists to generate better models automatically. Although the original soil observations were limited to soil profile data, the recent developments in mapping technology, interpolation methods, and remote sensing have provided advanced soil model developments. Together with advanced computational technology, it is possible to handle much larger volumes of data. The scientists may solve difficult problems of describing the spatial variation of soil. In this study, an algorithm is proposed for automatic three dimensional soil and velocity model development of southern part of the European side of Istanbul next to Sea of Marmara based on GIS data. In the proposed algorithm, firstly bedrock surface is generated from integration of geological and geophysical measurements. Then, layer surface contacts are integrated with data gathered in vertical borings, and interpolations are interpreted on sections between the borings automatically. Three dimensional underground geology model is prepared using boring data, geologic cross sections and formation base contours drawn in the light of these data. During the preparation of the model, classification studies are made based on formation models. Then, 3D velocity models are developed by using geophysical measurements such as refraction-microtremor, array microtremor and PS logging. The soil and velocity models are integrated and final soil model is obtained. All stages of this algorithm are carried out automatically in the selected urban area. The system directly reads the GIS soil data in the selected part of urban area and 3D soil model is automatically developed for large scale earthquake hazard simulation studies.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.4
• /
• pp.27-41
• /
• 2017

In this study, geomorphological and geological research has been carried out to estimate the possibility of ancient port location near Hwaseong Dangseong. Geomorphological characteristics around Eunsupo were analyzed through comparison of past and present topographic maps and field survey. Grain size, age dating, and geochemical analysis on surface sediments and borehole sediments were performed. Through the geomorphological characteristics analysis, it was interpreted that Eunsupo area was submerged in seawater especially at high tide in the past, and that ships could approach to the inside of the area through the tidal channel which were developed in the area. It is also assumed that ships were anchored at a low elevation point in the area. The paleo-environmental change in the area was analyzed based on the classification of sedimentary environment using grain size distribution of surface and borehole sediments and geochemical analysis. It was confirmed that the geomorphological interpretation for the possibility of ancient port location coincided well with the paleo-environmental change interpreted through sediment analysis. This study is a basic study for estimating ancient port location, and it is expected that more accurate paleo-environmental changes will be restored through detailed geomorphological survey and additional borehole analysis in the future research.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.149-158
• /
• 2011

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.269-282
• /
• 2016

Watershed area can be submerged due to constructions and management of dams, and these change can impact not only on ecosystem and environment of river basin area but also on local climate. This study is conducted to construct and classify climate zones of Andong Dam watershed where the area is submerged due to the construction of the dam. By applying Principal Components Analysis (PCA) and Getis-Ord $Gi^*$ statistics, three climate zones were classified for the result. Each zone was then analyzed and validated with climatic and geological features including topography, land cover, and forest type map. As a result of the analysis, there was a difference in temperature, elevation, precipitation and tree species distribution among the zones. Also, an analysis of land cover map showed that there were more agricultural land near Andong Reservoir. This study on the climatic classification is considered to be useful as the basis for decision-making or policy enforcement regarding ecosystem, environmental management or climate change response.