• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2015

This study is to analyze the heavy snowfall vulnerable area of snow load design criteria for greenhouse, cattle shed and building using ground measured snow depth data and Terra MODIS snow cover area(SCA). To analyze the heavy snowfall vulnerable area, Terra MODIS satellite images for 12 years(2001-2012) were used to obtain the characteristics of snow depth and snow cover areas respectively. By comparing the snow load design criteria for greenhouse(cm), cattle shed($kg/m^2$), and building structure($kN/m^2$) with the snow depth distribution results by Terra MODIS satellite images, the facilities located in Jeolla-do, Chungcheong-do, and Gangwon-do areas were more vulnerable to exceed the current design criteria.

• Journal of Environmental Health Sciences
• /
• v.30 no.3
• /
• pp.293-299
• /
• 2004

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence, numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristics of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends is towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a model of vehicle emission calculation by using real-time traffic data was studied. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It is possible that characteristics of hourly air pollutants emission rates is obtained from hourly traffic volume and speed. An emission rates model is allocated with a high resolution space by using geographic information system (GIS). Vehicle emission model was developed with a high resolution spatial, gridded and hourly emission rates.

• Journal of Environmental Impact Assessment
• /
• v.23 no.1
• /
• pp.39-50
• /
• 2014

In recent years, the frequency and scale of the natural disasters are growing rapidly due to the global climate change. In case of the urban flooding, high-density of population and infrastructure has caused the more intensive damages. In this study, we analyzed the spatial characteristics of urban flooding damage factors using GWR(Geographically Weighted Regression) for effective disaster prevention and then, classified the causes of the flood damage by spatial characteristics. The damage factors applied consists of natural variables such as the poor drainage area, the distance from the river, elevation and slope, and anthropogenic variables such as the impervious surface area, urbanized area, and infrastructure area, which are selected by literature review. This study carried out the comparative analysis between OLS(Ordinary Least Square) and GWR model for identifying spatial non-stationarity and spatial autocorrelation, and in the results, GWR model has higher explanation power than OLS model. As a result, it appears that there are some differences between each of the flood damage areas depending on the variables. We conclude that the establishment of disaster prevention plan for urban flooding area should reflect the spatial characteristics of the damaged areas. This study provides an improved understandings of the causes of urban flood damages, which can be diverse according to their own spatial characteristics.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.81-90
• /
• 2005

Based on the landslide hazard scoring system of Korea Forest Research Institute, a GIS model for predicting landslide hazards was developed. The risk of landslide hazards was analyzed as the function of 7 environmental site factors for the terrain, vegetation, and geological characteristics of the corresponding forest stand sites. Among the environmental factors, slope distance, relative height and shapes of slopes were interpreted using the forestland slope interpretation module developed by Chung et al. (2002). The program consists of three modules for managing spatial data, analyzing landslide hazard and report-writing, A performance test of the model showed that 72% of the total landslides in Youngin-Ansung landslides area took place in the highly vulnerable zones of grade 1 or 2 of the landslide hazard scoring map.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.77-81
• /
• 2015

The unit price contracting is the standard contracting method for highway projects in the U.S. As a result, state highway agencies have collected a large amount of historical bid data that they can use to determine engineer's estimates for future projects. The estimator must carefully consider various characteristics of a new project such as its location to determine an engineer's estimate as accurate as possible before bid letting. Higher cost estimates can result in the loss of the available budget and lower cost estimates may lead to deferral and delay of projects. The study uses the historical bid data obtained from Iowa Department of Transportation and develops a Geographic Information System (GIS) tool to visually show the variation of unit prices over the map using a spatial interpolation technique. The interpolation map can be used to estimate the unit price of the item at any location across Iowa. This noble method allows the estimator to effectively and fully utilize the historical bid data in a very time efficient manner and determine more accurate cost estimation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.75-88
• /
• 2017

This study analyzed wind flows based on spatial and geomorphological characteristics of Daegu Metropolitan City. A three-stage analysis was performed, starting with a comparison of meteorological relationships between local wind direction (synoptic wind) and local wind flow. In the second stage the study area was subdivided into districts and suburban districts to analyze the relative change of local wind flow. In stage three, the formation of wind corridor for local wind flow, wind flow for the entire urban space, and spatial relationships between flows were verified comparatively using KLAM_21. Three results are notable, the first of which is a low correlation between synoptic wind of a region, and local wind, flow in terms of meteorology. Secondly, observations of local wind flow at five downtown districts and two suburban districts showed that there were diverse wind directions at each measurement point. This indicates that the spatial and geomorphological characteristics of areas neighboring the measurement points could affect the local wind flow. Thirdly, verifying the results analyzed using KLAM_21, compared to Atomatic Weather System(AWS) measurement data, confirmed the reliability of the numerical modelling analysis. It was determined that local wind flow in a city performs a spatial function and role in ameliorating the urban heat island phenomena. This indicates that, when an urban planning project is designed, the urban heat island phenomena could be ameliorated effectively and sustainably if local wind flow caused by immediate spatial and geomorphological characteristics is confirmed systematically and techniques are intentionally applied to connect the flows spatially within areas where urban heat islands occur.

• Journal of Wetlands Research
• /
• v.6 no.3
• /
• pp.47-54
• /
• 2004

A hydraulically and hydrologically based estimation method of pollutant delivery load for water quality modeling is proposed. The proposed method works on grid basis and routes overland flows from one cell to the next following the maximum downslope directions. The method is able to consider spatially-varied data of source pollutant, topography, land slopes, soil characteristics, land use and aspects, which can be extracted from geographic information systems (GIS) and from digital elevation models (DEMs). Because of this feature, the proposed method can be expected to be used for evaluating the impacts of various practices on watershed management for water quality.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.67-73
• /
• 1991

To define a small river in Korea. hydrologic- and geographic-characteristics. such as watershed area, channel slope, channel length and time of concentration are investigated and their limits are presented. The current equations of design-width-determination of the small rivers are examined and two equations for the design-width-determination of the small rivers have been suggested in this paper. A small river in Korea can be defined that watershed area is less than $10km^2$, channel length less than 6 km, channel slope over 0.02. time of concentration less than 30 minutes. As Band Q are defined as a design width and a design flood, respectively, the suggested equation to determine the design width is $B=1.235Q^{064}$ for less than $300m^3/sec$ of design flood. and when B and A are defined as a design width and a watershed area, respectively. the recommended equation is $B=8.794A^{0.56}$ for less than $10km^2$ of watershed area.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.1-12
• /
• 2008

This study was to develop the analyzing system for watershed characteristics data. The developed system has laid the foundation for preparing the input data in various hydrological models. The algorithms and items included in the system were derived from benchmarking of the GIS WEASEL, which used to prepare the input data of PRMS (Precipitation-Runoff Modeling System). The system was designed to develop and maintain the organized system using both object-oriented UML (Unified Modeling Language) and GIS component-based ArcObjects.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.487-496
• /
• 2014

Much research has been actively done so far on the inconvenience of each urban railway station; however, Research is on importance factor analysis on transfer facilities by considering characteristics of railway stations is relatively insufficient. In this study, a novel method of finding causality between transfer facilities(movement, information, comfortability, etc,) in terms of demands and platform types is provided by using SEM(Structural Equation Model). The results of SEM analysis show that a large demand transfer station if combined with island and segregate platform types, has a higher importance factor with respect to information facility, movement facility position and comfortability. In addition, a medium demand transfer station if combined with separate and separate platform types has a higher importance factor with respect to information facility, movement facility and comfortability.