• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.300-305
• /
• 2023

In this paper, we confirmed that an efficient sensor network can be established at a low cost by applying Geofencing technology to a LoRa-based sensor network and verified its effectiveness in disaster management such as forest fires. We detected changes through GPS, gyro sensors, and combustion detection sensors, and defined the validity size of the Geofencing cell accurately. We proposed a LoRa Payload Frame Structure that has a flexible size according to the size of the sensor information.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.211-217
• /
• 2014

In this paper, by using geofencing technology to set the area you want to move tourists. Geofence set of tourists in the region enters the smartphone by sending e-mail or SMS alarm to display a detailed map of the area to visit assistance. When you arrive at the destination of the museum exhibits or exhibits to the NFC tag attached to each corresponding to a web server for a detailed description of the exhibits from the get-down. Multimedia content using an existing exhibits described. Media of exhibition space and the interaction between the visitors tour guide system capable was built.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2023

Geofencing supports unmanned aerial vehicle (UAV) operation by defining stay-in and stay-out regions. National Aeronautics and Space Administration (NASA) has developed a prototype of the geofencing function, SAFEGUARD, which prevents stayout region violation by utilizing position estimates. Thus, SAFEGUARD depends on navigation system performance, and the safety risk associated with the navigation system uncertainty should be considered. This study presents a methodology to compute the safety risk assessment-based along-track position error bound under nominal and Global Navigation Satellite Systems (GNSS) failure conditions. A Kalman filter system using pseudorange measurements as well as pseudorange rate measurements is considered for determining the position uncertainty induced by velocity uncertainty. The worst case pseudorange and pseudorange rate fault-based position error bound under the GNSS failure condition are derived by applying a Receiver Autonomous Integrity Monitor (RAIM). Position error bound simulations are also conducted for different GNSS fault hypotheses and constellation conditions with a GNSS/INS integrated navigation system. The results show that the proposed along-track position error bounds depend on satellite geometries caused by UAV attitude change and are reduced to about 40% of those of the single constellation case when using the dual constellation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.6
• /
• pp.631-636
• /
• 2019

In recently, various kinds of services utilizing the location information of the user's smart phone have appeared. Based on this trend, we designed a new type of learning assistant system that utilizes geofencing technology, which is a field of location information technology. This system identifies the location of the classroom using the location information of learner's the smart phone and automatically provides the necessary learning contents to the learner's smart phone when the learner enters the classroom set as the virtual fence area while carrying the smart phone respectively. Our system provides learning contents in a form similar to the form of a message or a mobile coupon and learners are used to such mobile service environments very much. So the use of learning contents provided by our system is expected to help improve the learning effect of learners.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.496-502
• /
• 2020

The electronic attendance management system is being introduced and operated on a pilot basis by some universities and educational institutions. However, most of the related systems have installed and operated the existing barcode and magnetic card systems. Classroom attendance is managed by introducing RF cards, but it causes problems such as recognition distance (less than 5cm) and the need for a check process in which students have to read the card each time with a reader for attendance. Also, it is not possible to respond in real time to the situation of midterm (early leave, absence from the second lecture time, etc.) because it is used in the lecture time of one subject with the record checked once. In order to solve these problems, the various mobile attendance systems proposed to solve these problems are also unable to fundamentally solve problems such as interim attendance and proxy attendance because they check attendance using only the application of a smartphone. In this paper, we use geofencing technology, which is a positioning-based technology that detects the entry and exit of people, objects, etc. in areas separated by virtual boundaries. The proposed system solves the problem of intermediate attendance and alternate attendance by setting the student to automatically record the access record when entering and leaving the classroom set as a geofence with a smartphone. In addition, it also provides a function to prevent unintentional mistakes that occur through the smartphone by limiting some of the functions of the smartphone such as silence, vibration, and Internet use when entering the classroom.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.508-514
• /
• 2020

Geofence defines the area that UAS should not enter or exit to ensure the safety of their operations, and is considered as one of critical capabilities of the UTM (UAS traffic management) system. In this study, a geofence simplification method using modified perpendicular algorithm is proposed. The performances of the proposed geofence simplification method were evaluated with actual building data, and the evaluation results confirmed that the number of vertices can be effectively reduced while minimizing the spatial size of the geofence.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.381-382
• /
• 2023

Frequent accidents occur when workers at construction sites leave the safety zone, and particularly in the past 5 years, 9 fatal accidents occurred at the Korea Railroad Corporation due to train accidents on other tracks during track work. With the Severe Accident Punishment Act taking effect in January 2022, it is a priority to secure a safe work environment for workers at industrial (construction) sites. Therefore, there is a need to manage workers' departure from the safety zone (construction zone) and to facilitate communication within the construction zone. In this study, a mobile edge computing CCTV system is proposed that uses geofencing to determine whether workers are working in the danger zone, which can judge and respond in real-time to the ever-changing field environment. The proposed system is mobile and flexible, rather than server-based fixed CCTV. However, since it is designed mainly based on images, it has limitations in recognition rate depending on the environment such as distance, viewing angle, and illumination. As a way to compensate for this, it is required to develop more reliable equipment by combining technologies such as LiDAR and Radar.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.169-175
• /
• 2016

Geofence is a virtual perimeter for a real-world geographical area, which could be statically or dynamically established the specified area if necessary. Many geofencing applications incorporate 2D(two-dimensional) map such as the Google map, allowing administrators to define boundaries on top of a satellite view of a specific geographical area. But these applications do not provide 3D(three-dimensional) spatial information as well as 2D location information no matter where indoor or outdoor. Therefore we propose a mechanism to identify indoor or outdoor location for 3D geofence, and implement 3D geofence using smartphone. The proposed mechanism identifies the position information on 3D geofence regardless of indoor or outdoor, inter-floor with only GPS and WiFi. In the near future, 3D geofence as well as LBS are promising applications that become possible when IoT can become organized and connected by location.