• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.217-222
• /
• 2010

The geoid is the level surface that closely approximates mean sea level and usually used for the origin of vertical datum. For the computation of geoid, various sources of gravity measurements are used in South Korea and, as a consequence, the geoid models may show different results. however, a limited analysis has been performed due to a lack of controlled data, namely the GPS/Leveling data. Therefore, in this study, the gravimetric geoids are compared with the geodetic geoid which is obtained through the GPS/Leveling procedures. The gravimetric geoids are categorized into geoid from airborne gravimetry, geoid from the terrestrial gravimetry, NGII geoid(geoids published by National Geographic Information Institute) and NORI geoid(geoi published by National Oceanographic Research Institute), respectively. For the analysis, the geometric geoid is obtained at each unified national control point and the difference between geodetic and gravimetric geoid is computed. Also, the geoid height data is gridded on a regular $10{\times}10-km$ grid so that the FFT method can be applied to analyze the geoid height differences in frequency domain. The results show that no significant differences in standard deviation are observed when the geoids from the airborne and terrestrial gravimetry are compared with the geomertric geoid while relatively large difference are shown when NGII geoid and NORI geoid are compared with geometric geoid. Also, NGII geoid and NORI geoid are analyzed in frequency domain and the deviations occurs in long-wavelength domain.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.269-274
• /
• 2005

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. And like this, produce EDM measurement using this GPS observation results and compare the whole boundary point error when set digital topographic map and nautical chart by these boundary.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.275-281
• /
• 2004

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. This study compare the whole boundary point error When producing EDM measurement using this GPS observation results and setting digital topographic map and nautical chart by these boundary.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1197-1199
• /
• 2003

ROCSAT-2 mission is to daily image over Taiwan and the surrounding area for disaster monitoring, land use, and ocean surveillance during the 5-year mission lifetime. The satellite will be launched in December 2003 into its mission orbit, which is selected as a 14 rev/day repetitive Sun-synchronous orbit descending over (120 deg E, 24 deg N) and 9:45 a.m. over the equator with the minimum eccentricity. National Space Program Office (NSPO) is developing a ROCSAT-2 Image Processing System (IPS), which aims to provide real-time high quality image data for ROCSAT-2 mission. A simulated ROCSAT-2 image, based on Level 1B QuickBird Data, is generated for IPS verification. The test image is comprised of one panchromatic data and four multispectral data. The qualification process consists of four procedures: (a) QuickBird image processing, (b) generation of simulated ROCSAT-2 image in Generic Raw Level Data (GERALD) format, (c) ROCSAT-2 image processing, and (d) geometric error analysis. QuickBird standard photogrammetric parameters of a camera that models the imaging and optical system is used to calculate the latitude and longitude of each line and sample. The backward (inverse model) approach is applied to find the relationship between geodetic coordinate system (latitude, longitude) and image coordinate system (line, sample). The bilinear resampling method is used to generate the test image. Ground control points are used to evaluate the error for data processing. The data processing contains various coordinate system transformations using attitude quaternion and orbit elements. Through the qualification test process, it is verified that the IPS is capable of handling high-resolution image data with the accuracy of Level 2 processing within 500 m.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1942-1948
• /
• 2021

The cadastre in Korea was established with the outdated technology of the Japanese colonial period, and thus currently 15% of the Korea domestic land does not match the cadastral map. Accordingly, the government has been establishing the Korean cadastre under the name of 'Cadastral Re-investigation Project' and is changing the origin of the survey to the world geodetic system. Assuming that the project is completed, we propose a drone boundary survey method that can be used to easily survey using the exact digital cadastral information. The developed mobile GCS application can control the drone and acquire the boundary point coordinates recorded in the cadastre, and the drone automatically flies to mark the boundary points. The developed prototype of drone made a tour along the 6 boundary points in 2 minutes.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1049-1057
• /
• 2020

This study aimed to develop a flow measurement method using drone in flood season. Measuring flow in all branches is difficult to conduct annually due to budget and labor limitation, safety and river works. Especially when heavy rain like storm comes, changes in stage-discharge relationship should be reviewed; however, it is usually impeded by the aforementioned issues. To solve the problem, it developed a simple measuring method with a minimum of labor and time. A numeric map and numeric orthophoto coordinate of South Korea are mostly based on Transverse Mercator Projection (TM) in accordance with rectangular coordinate system and use World Geodetic Reference System 1980 (GRS80) oval figure for conversion. Applying a concept of aerial photogrammetry, it located four visible Ground Control Points (GCP) near the river at Uijeongbu-si (Singok Bridge) and Yeongdong-gun (Youngdong 2nd Bridge) station and measured the coordinates using VRS DGPS. Hovering at a same level, drones took orthophoto of water surface at an interval of 3 seconds. It defined the pictures with GRS80 TM coordinate system, a rectangular coordinate system and then conducted an orthometric correction using GCP coordinates. According to X and Y coordinate analysis, it estimated the distance between the floating positions at 3 seconds-intervals and calculated the flow through the flow area according to the flow path. This study attested applicability of the flow measurement method using drone in flood season by applying the rectangular coordinate system based on the concept of aerial photogrammetry.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.1
• /
• pp.69-77
• /
• 2000

In retrieving and analyzing digital map information using mouse or key strokes, it needs several times of repeated mouse operation for designating the range of study area. In this study, we proposed a voice activated map information retrieval system for eliminating such repetitions and we realized the system on the personal computer. The system was constructed in two ways - traditional OLE(object linking embedding) method and MFC(Microsoft fundamental class) method in controlling of window display for practical use. In the system performance evaluation, the retrieval data for digital map were consisted of 68 words uttered by 3 male persons which include attribute words and control words for Susung-gu area of Taegu city in a 1:5,000 map. As the results, we obtained the average 98.02% of recognition rate through on-line tests in the office environment and the operating speed of 5.39 seconds by OLE, 10.38 seconds by MFC. These results showed the possibility for practical use of information retrieval system using speech recognition in digital map.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.53-64
• /
• 2015

Several countries have built National Spatial Data Infrastructure (NSDI) for information sharing among various fields. One of the important factors of NSDI is framework data, which is the most commonly used geospatial data across various fields. Previous studies on the framework data suggest components based on frequency survey and case study. However, such research methods do not have objectivity in setting the components of the framework data. This research uses factor analysis with 104 medium-level layers from the most widely used National Base Map and 5 layers from the other sources including cadastre and aerial image. Each layer is scaled with usage level as four different patterns of 1) background data, 2) reference data, 3) base data, and 4) other data, respectively. The analysis results show that the layers are grouped into 5 to 7 factors according to the patterns. ANOVA reveals that the mean differences between the factors with high values and the other factors with low values under each pattern are statistically significant. Such high value factors under each pattern consist of similar layers, close to identical, with those under the other categories. This research proposes framework data system, including transportation, building, hydrography, elevation, administrative district, digital orthoimagery, geodetic control, and cadastral based on the analysis results. Proposed framework in this research will be a basis of establishing spatial data sharing system. For sharing proposed framework data in various fields, these data must be established and distributed as actual standard and also related future researches should be performed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.699-710
• /
• 2009

If a country has her geoid model, it could be determine accurate orthometric height because the geoid model could provide continuous equi-gravity potential surface. And it is possible to improve the coordinates accuracy of national control points through geodetic network adjustment considering geoidal heights. This study aims to find the best way to develop geoid model in Philippines which have similar topographic conditions as like Malaysia and Indonesia in Eastsouth asia. So, in this study, it is surveyed the general theories of geoid determination and development cases of geoid model in Asia and it is computed that the geoidal heights and gravity anomalies by spherical harmonic analysis using EGM2008, the latest earth geopotential model. The results show that first, the development of gravimetric geoid model based on airborne gravimetry is needed and second, about 200 GPS surveying data at national benchmark is needed. It is concluded that it is the most reasonable way to develop the hybrid geoid model through fitting geometric geoid by GPS/leveling data to gravimetric geoid. Also, it is proposed that four band spherical Fast fourier transformation(FFT) method for evaluation of Stokes integration and remove and restore technique using EGM2008 and SRTM for calculation of gravimetric geoid model and least square collocation algorithm for calculation of hybrid geoid model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.231-244
• /
• 2015

The accuracy of reference point of VLBI antenna is mandatory to perform collocation of different space geodetic techniques. In this study, we evaluated the optimal methods for the 3D circle fitting to enhance the accuracy of the reference point of VLBI antenna. Two kinds of methodologies for the orthonormal coordinate system with translation of planar observation point and the unitary coordinate transforamation were suggested and their fitting accuracies were evaluated where the orthogonal distance was calculated by residual between observation point and fitting model and the recursive calculation was performed to improve the accuracy of 3D circle fitting. Finally, we found that the methodology for the unitary coordinate transformation is highly appropriate to determine the optimal equation for azimuth-axis and elevation-axis of VLBI antenna. Therefore, the reference point of VLBI antenna with high accuracy can be determined by the intersection of the above two axises (azimuth-axis and elevation-axis). This result is expected to be utilized for a variety of researches for connection between VLBI observation results and the national control point.