• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.2
• /
• pp.1-11
• /
• 2008

Increasing demand for improved reliability and survivability of mission-critical systems is driving the development of health monitoring and Automated Contingency Management (ACM) systems. An ACM system is expected to adapt autonomously to fault conditions with the goal of still achieving mission objectives by allowing some degradation in system performance within permissible limits. ACM performance depends on supporting technologies like sensors and anomaly detection, diagnostic/prognostic and reasoning algorithms. This paper presents the development of a generic prototype test bench software framework for developing and validating ACM systems for advanced propulsion systems called the Propulsion ACM (PACM) Test Bench. The architecture has been implemented for a Monopropellant Propulsion System (MPS) to demonstrate the validity of the approach. A Simulink model of the MPS has been developed along with a fault injection module. It has been shown that the ACM system is capable of mitigating the failures by searching for an optimal strategy. Furthermore, the concepts of Validation and Verification (V&V) of such systems are introduced with relevant examples.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.1
• /
• pp.1-11
• /
• 1999

In this paper, we proposed a design method of parameterized viterbi decoder, which automatically synthsizes the diverse viterbi deciders used in the digital mobile communication systems. It is designed to synthesize a viterbi decoder specified by user-provided parameters. Those parameters are constraint length, code rate generator polynomials of teh convolutional encoder, data rate and bits/frame of the data transmission, and soft decision bits of viterbi decoder. For the design of the parameterized viterbi decoder, we designed a user interface module C-language, and a viterbi decoder module in a hierarchical atructure using VHDL language and its generic statement. For the verification of the parameterized viterbi decoder, we compared our synthesized viterbi decoder with the conventional viterbi decoder which is designed for the IS-95 CDMA system. The proposed design method of the viterbi decoder will be a new method to obtain a required viterbi decoder in a very short time only by supplying the design parameters.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.214-220
• /
• 2005

Initial Risk assessments using physicochemical properties and acute toxicity are conducted to provide information for managers to decide the potential adverse effects and played as a tool for decision-making in development of new substances. In this study, we built initial risk assessment framework and carried out human and ecology initial risk assessment for three different pesticides of captan, glyphosate, and paraquat dichloride to confirm our framework. Two water estimation models of GENEEC (GENeric Estimated Environmental Concentration) and FOCUS (FOrum for the Co-ordination of pesticide models and their USe) were employed for pesticides exposure assessment. Application for paraquat dichloride and glyphosate uses shows very low human and ecology risk. On the other hand, high acute ecological risk was observed from the application for captan. These results showed good agreements with the U.S. EPA RED (Reregistration Eligibility Decision) reports verifying the framework of this study.

• Journal of information and communication convergence engineering
• /
• v.11 no.3
• /
• pp.207-215
• /
• 2013

In this paper, we address the challenging computer vision problem of obtaining a reliable facial expression analysis from a naturally interacting person. We propose a system that combines a 3D generic face model, 3D head tracking, and 2D tracker to track facial landmarks and recognize expressions. First, we extract facial landmarks from a neutral frontal face, and then we deform a 3D generic face to fit the input face. Next, we use our real-time 3D head tracking module to track a person's head in 3D and predict facial landmark positions in 2D using the projection from the updated 3D face model. Finally, we use tracked 2D landmarks to update the 3D landmarks. This integrated tracking loop enables efficient tracking of the non-rigid parts of a face in the presence of large 3D head motion. We conducted experiments for facial expression recognition using both framebased and sequence-based approaches. Our method provides a 75.9% recognition rate in 8 subjects with 7 key expressions. Our approach provides a considerable step forward toward new applications including human-computer interactions, behavioral science, robotics, and game applications.

• International Journal of Quality Innovation
• /
• v.7 no.2
• /
• pp.50-68
• /
• 2006

Innovation fuels organizations evolving them to withstand rapid changes in markets and challenges from competition. While diversified concepts of innovation are examined, a generic framework for managing organizational innovation is established to portray the notion in a methodical approach. Substantiation of the determinants for organizational innovation is carried out in order to examine the framework against the practical situation. Subsequently, expectations and actual accomplishments of the determinants for organizational innovation from the industry are determined so as to understand the industrial view towards the framework. This paper summarizes the empirical findings of a survey of organizational innovation with a sample of 208 electronic and electrical manufacturing companies in the Greater Pearl River Delta (GPRD), China. On one hand, the survey findings confirm the readiness of the generic framework from the practical perspective of the industry. On the other hand, rankings are obtained for the expected importance and company accomplishment of the determinants for organizational innovation, namely in the areas of management leadership and commitment, employee capability and attitude and strategy development for innovation. The improvement area is also verified by the shortcomings of the expectation in comparison to the company accomplishment in each determinant. Meanwhile, it is believed that a directional attitude towards the determinants can facilitate the accomplishment of the determinants of organizational innovation. Further results will be generated from a more in-depth analysis of variables. The confirmed framework will be further developed into an assessment system for organizational innovation with the support of best practices in each determinant.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2708-2730
• /
• 2012

The growing concern for the protection of personal information has made it critical to implement effective technologies for privacy and data management. By observing the limitations of existing approaches, we found that there is an urgent need for a flexible, privacy-aware system that is able to meet the privacy preservation needs at both the role levels and the personal levels. We proposed a conceptual system that considered these two requirements: a graph-based, access control model to safeguard patient privacy. We present a case study of the healthcare field in this paper. While our model was tested in the field of healthcare, it is generic and can be adapted to use in other fields. The proof-of-concept demos were also provided with the aim of valuating the efficacy of our system. In the end, based on the hospital scenarios, we present the experimental results to demonstrate the performance of our system, and we also compared those results to existing privacy-aware systems. As a result, we ensured a high quality of medical care service by preserving patient privacy.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.179-184
• /
• 2023

We propose the modeling methodology of CMOS inverter made of LTPO TFT using a machine learning. LTPO can achieve advantages of LTPS TFT with high electron mobility as a driving TFT and IGZO TFT with low off-current as a switching TFT. However, since the unified model of both LTPS and IGZO TFTs is still lacking, it is necessary to develop a SPICE-compatible compact model to simulate the LTPO current-voltage characteristics. In this work, a generic framework for combining the existing formula of I-V characteristics with artificial neural network is presented. The weight and bias values of ANN for LTPS and IGZO TFTs is obtained and implemented into PSPICE circuit simulator to predict CMOS inverter. This methodology enables efficient modeling for predicting LTPO TFT circuit characteristics.

• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.330-338
• /
• 2012

HACCP is a preventative food safety management system whose application is highly encouraged worldwide. In this study, the workers' demands for the application of HACCP system at the meat retail shops were surveyed. According to a factor analysis on the demands of the application of HACCP system, the results could be classified into three factors: HACCP support, HACCP promotion and education, and generic livestock product safety management. Items on demands showed higher results for HACCP support (3.91 point) than for HACCP promotion and education (3.83 point) or generic livestock product safety management (3.72 point). The application of HACCP system was more demanded by HACCPcertified retailors with 4.11 point than the non-HACCP-certified ones (3.57 point). From the analysis of items on demands, 'governmental promotion of the general public livestock HACCP; (p<0.001) was the highest demand item by the HACCPcertified retailors and 'HACCP certification support for the government's investment' by the non-HACCP-certified ones (p<0.05). The strengthening of governmental support for the application of HACCP at meat retail shops as well as active HACCP promotion and education aiming at general public was demanded. With this, the establishment of HACCP system and the improvement of safety management level at the area of meat retail shops could be achieved, contributing to the increase of consumers' satisfaction.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.430-443
• /
• 2005

A general construction algorithm of the Grassmann space parameters in linear systems - so-called, the Plucker matrix, 'L' in m-input, p-output, n-th order static output feedback systems and the Plucker matrix, $'L^{aug}'$ in augmented (m+d)-input, (p+d)-output, (n+d)-th order static output feedback systems - is presented for numerical checking of necessary conditions of complete static and complete minimum d-th order dynamic output feedback pole-assignments, respectively, and also for discernment of deterministic computation condition of their pole-assignable real solutions. Through the construction of L, it is shown that certain generically pole-assignable strictly proper mp > n system is actually none pole-assignable over any (real and complex) output feedbacks, by intrinsic rank deficiency of some submatrix of L. And it is also concretely illustrated that this none pole-assignable mp > n system by static output feedback can be arbitrary pole-assignable system via minimum d-th order dynamic output feedback, which is constructed by deterministic computation under full­rank of some submatrix of $L^{aug}$.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.42
• /
• pp.31-38
• /
• 1997

The main objective of this research is to develop a model to select the optimal input service level for a distribution center - multi branch inventory distribution system. With the continuous review policy, the distribution center places an order for specific order quantity to an outside supplier, and the order quantity is replenished after a certain lead time. Also, each branch places an order for particular order quantity to the distribution center to satisfy the customer demands, and receives the replenishment after a lead time. When an out of stock condition occurs during an order cycle, a backorder is placed to the upper level to fill the unfilled demands. With these situation, variable demand and variable lead time are used for better industrial practice. Further, actual lead times with a generic lead time distribution are used in developing the control model. Under the actual lead time model, the customer service measures actually attained for the distribution center and each branch are explained as the effective customer service measures. Thus, throughout the optimal control (using computer search procedures), we can select the optimal input service levels for the distribution center and each branch to attain the effective service level for each branch which is consistent with the goal level of service for each branch. At the same time, the entire distribution system keeps minimum inventories.