• Coupled systems mechanics
• /
• 제12권5호
• /
• pp.409-418
• /
• 2023

A coupled algorithm is proposed which first considers the creation of porous structure of the material and then the simulations of response of mechanical components with porous structure to a variable load history. The simulations are carried out by the Prandtl operator approach in the finite element method (FEM) which enables structural simulations of mechanical components subjected to variable thermomechanical loads. Temperature-dependent material properties and multilinear kinematic hardening of the material can be taken into account by this approach. Several simulations are then performed for a tensile-compressive specimen made of a generic porous structure and mechanical properties of Aluminium alloy AlSi9Cu3. Variable mechanical load history has been applied to the specimens under constant temperature conditions. Comparison of the simulation results shows a considerable elastoplastic stress-strain response in the vicinity of pores whilst the surface of the gauge-length of the specimen remains in the elastic region of the material. Moreover, the distribution of the pore sizes seems more influential to the stress-strain field during the loading than their radial position in the gauge-length.

• 인터넷정보학회논문지
• /
• 제11권1호
• /
• pp.35-48
• /
• 2010

차세대 이동통신 시스템에서는3세대 진화망인 LTE(long-Term Evolution), WiMAX/WiBro, 차세대 WLAN등 다양한 무선 접속 기술이 All-IP 기반의 핵심망을 중심으로 통합되는 형태로 발전하고 있다. 이러한 발전에 따라 중첩된 다양한 무선 이종망 환경에서 최적의 조건을 제공하는 망으로의 접속을 제공하거나 단말의 이동에 따라 중첩된 여러 접속망들 중 최적의 조건을 제공하는 망으로 접속하는 수직적 핸드오버가 필요하다. 그러나 현재까지는 각각의 네트워크가 독자적 서비스 제공을 위해 독립적인 무선자원관리 기능을 제공하여 왔으므로, 이종망 환경에서의 다양한 네트워크를 끊김없이 서비스를 제공하기 위해서는 개별 네트워크의 무선자원들을 통합적으로 관리하여 최적의 서비스를 제공할 수 있어야 할 것이다. 최근 이러한 무선 이종망 환경에서의 문제점을 해결하기 위해 적응적 이동성을 위한 범용링크계층(GLL)과 통합무선자원관리(CRRM) 방식의 개념이 도입되고 있다. 본 논문에서는 LTE와WLAN 사이에서의 수직적 핸드오버 지원을 위한 핵심 기술 및 통합망의 구조, 그리고 효율적인 수직적 핸드오버 방안을 제시한다. 우선 수직적 핸드오버 제공을 위한 통합망의 구조와 통합무선자원관리 기능을 정의하고, 효율적인 수직적 핸드오버를 위한 범용링크계층을 기반으로 정책기반과 다기준 의사결정법(MCDM)을 혼합한 수직적 핸드오버 알고리즘을 제안한다. 시뮬레이션 연구 결과 본 논문에서 제안하는 수직적 핸드오버 기법은 수신신호의 세기를 기반으로하는 방법과 다기준 의사결정법 방법에 비해 데이터 처리량, 핸드오버 성공확률, 서비스 사용비용 측면에서 우수한 성능을 보였다.

• 한국주거학회논문집
• /
• 제20권1호
• /
• pp.45-58
• /
• 2009

This research starts from the questioning of current housing development on the hilly site in Korea. It aims to investigate various design techniques of low-rise housing as an alternative housing plan on hilly sites. Several generic solutions of the combination of building type and road pattern are tested for a simulation process, and evaluated in terms of crucial design issues; development density, parking space and open space. As a result, four reasonable models are selected for making full use of geographical features of hilly site, two models each land slope of $18^{\circ}$ and $26^{\circ}$. Several design techniques for each model are also suggested, in ensuring the development feasibility by considering land slope, vehicular access and parking, common open space, and community facilities.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.252-268
• /
• 2009

In the present study, a grid deformation technique has been incorporated into the unsteady compressible and incompressible viscous flow solvers on unstructured hybrid meshes. An algebraic method based on the basis decomposition of normal edge vector was used for the deformation of viscous elements, and a ball-vertex spring analogy was adopted for inviscid elements among several spring analogy methods due to its robustness. The present method was validated by comparing the results obtained from the grid deformation and the rigid motion of entire grids. Fish swimming motion of an NACA0012 airfoil and flapping wing motion of a generic fighter were simulated to demonstrate the robustness of the present grid deformation technique.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.207-210
• /
• 2002

Metal matrix composites(MMCs) are increasingly attractive for high technology components such as aerospace applications and transportations due to their high strength, stiffness, and toughness. Many processes for fabricating MMCs have been developed, and relatively simple Foil-Fiber-Foil method is usually employed in solid state consolidation processes. During the consolidation processes at high temperature, densification occurs by the inelastic flow of the matrix materials, and the process is coupled with the conditions of pressure, temperature and volume fraction of fiber and matrix materials. This is particularly important in titanium matrix composites, and thus a generic model based on micro-mechanical approaches enabling the evolution of density over time to be predicted has been developed. The mode developed is then implemented into FEM so that practical process simulation has been carried out. Further the experimental investigation of the consolidation behavior of SiC/Ti-6Al-4V composites using vacuum hot pressing has been performed, and the results obtained are compared with the model predictions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.249-250
• /
• 2011

국제 전기 위원회(IEC)의 기술 위원회(TC-88)에서는 풍력 시스템과 계통 안정성 분석 그리고 단락회로(LVRT), 발전기와 부하의 손실 해석, 시스템 분리와 같은 전력 시스템의 동적 시뮬레이션에 활용하기 위한 풍력 발전기와 발전 단지의 동적 시뮬레이션 모델 표준화 작업을 수행하고 있다. 본 논문의 목적은 특정한 풍력 터빈 제조사를 알 수 없는 상태에서 계통 연구가 적용될 수 있는 일반적인 모델을 소개하는 것이다. 그와 함께 제조사의 모델이 표준화 된 모델로의 쉬운 교환을 가능하게 하는 블록도가 적용되어야 한다. 본 작업의 1단계 작업은 2011년 마무리 될 계획이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.240-241
• /
• 2011

국제 전기 위원회(IEC)의 기술 위원회(TC-88)에서는 풍력시스템과 계통 안정성 분석 그리고 단락회로(LVRT), 발전기와 부하의 손실 해석, 시스템 분리와 같은 전력 시스템의 동적 시뮬레이션에 활용하기 위한 풍력 발전기와 발전 단지의 동적 시뮬레이션 모델 표준화 작업을 수행하고 있다. 본 논문의 목적은 특정한 풍력 터빈 제조사를 알 수 없는 상태에서 계통 연구가 적용될 수 있는 일반적인 모델을 소개하는 것이다. 그와 함께 제조사의 모델이 표준화 된 모델로의 쉬운 교환을 가능하게 하는 블록도가 적용되어야 한다. 본 작업의 1단계 작업은 2011년 마무리 될 계획이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.586-588
• /
• 2011

Adaptive feedforward control(AFC) is largely aimed for improving control performance of dynamic systems particularly involving periodic disturbance signals in engineering fields. This paper presents a novel hybrid AFC approach for specific systems with multiple disturbances in control input and state variables. The proposed AFC mechanism is hierarchically composed of the conventional AFC and a PID typed auxiliary control law in parallel. The former is generic to decrease periodic disturbance in control actuators and the latter is additionally constructed to overcome control deterioration due to time-varying uncertainty of given systems. We carry out numerical simulation to test reliability of the hybrid AFC system and compare its control performance with a well-known conventional AFC method in terms of time and frequency domains for proving of its superiority.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권1호
• /
• pp.75-86
• /
• 1999

An air-data estimator for generic air-breathing hypersonic vehicles (AHSVs) is developed and demonstrated with an example vehicle configuration. The AHSV air-data estimation strategy emphasized improvement of the angle of attack estimate accuracy to a degree necessitated by the stringent operational requirements of the air-breathing propulsion. the resulting estimation problem involves highly nonlinear diffusion process (propagation); consequently, significant distortion of a posteriori conditional density is suspected. A simulation based statistical analysis tool is developed to characterize the nonlinear diffusion process. The statistical analysis results indicate that the diffusion process preserves the symmetry and unimodality of initial probability density shape state variables, and provide the basis for applicability of an Extended Kalman Filter (EKF). An EKF is designed for the AHSV air-data system and the air data estimation capabilities are demonstrated.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.977-983
• /
• 2014

A repeat-back jamming signal is an intentionally re-broadcasted GNSS (Global Navigation Satellite System) interference. In this paper, a novel repeat-back jamming detection scheme is proposed. The proposed scheme uses a combined pseudo random noise signal (C-PRN) and is available for a generic GNSS receiver with a single antenna. The C-PRN signal is made by combining several received pseudo random noise signals that had been transmitted from the visible GNSS satellites. Through a Monte-Carlo simulation, the detection probability of a repeat-back jamming signal detected with the proposed scheme is presented.