• Journal of the Korean Professional Engineers Association
• /
• v.34 no.5
• /
• pp.40-43
• /
• 2001

In order for the World cup football game to be operated stably with duplicate service electric power supply, It is done, emergency generator and the U.P.S it establishes. the electric power system power control, lighting control, integrated monitoring. rue fighting. obstruction light, the searchlight, snow melting, electric erosion shield. grounding, the lightening protection and viewable lighting, stadium floodlight and an electric bulletin board it composed of the back which it sells.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.521-526
• /
• 1997

The Spin Tester(High Speed Balancing and Overspeed Test Facility), which is designed for the quality control of turbine, generator, and rotors was supposed to be constructed with the use of Steel Fiber Reinforced Concrete(SERC) for reducing the risk of accident while operation. However, it was very existence of fiber concrete due to there are two major concern in the SFRC work: one is existence of fiber ball due to inhomogeneous mixing, the other is the segregation of the concrete materials. To avoid these possible problems, the S/a was controlled about 55% to reduce the segregation and the high range AE water reducing agent was used to maintain the slump over the value of 18cm. With these careful consideratons, the SFRC work was done successfully by only using regular equipments like pump car and vibrator.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.335-337
• /
• 2003

The protection against transient instability and consequent out-of-step condition is a major concern for the utility. The unstable system may cause serious damage to system elements such as generators and transmission lines. Therefore, out-of-step detection is essential to operate a system safely. This paper presents the Out-of-Step detection algorithm using voltage frequency variation. The digital filters based on Discrete Fourier Transforms (DFT) to calculate the frequency of a sinusoid voltage are used, and the generator angle is estimated using the variation of the calculated voltage frequency. The proposed out-of-step algorithm is based on the assessment of a transient stability using equal area criterion. The proposed out-of-step algorithm is verified and tested by using EMTP MODELS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.490-493
• /
• 1999

Due to the miniaturization of electrical components and assembles on signal and telecommunication circuits, transient overvoltages caused by switching operation or lightning surge has become more interesting concern to the field of electrical engineering. This paper describes the development of transient voltage blocking devices (TBDs) that can protect sensitive signal and telecommunication devices from overvoltages. Two kinds of TBDs are designed and tested by using a combination surge generator which can produce the standard impulse current of 8/20${\mu}$s 2.1kA according to the IEC 1000-4-5 standard. From the simulation and experimental reults, it is confirmed that the proposed TBD has an enough protection performance in low insertion loss and tight clamping voltage.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.82-84
• /
• 2003

This paper presented a method to develop a relay model by the user-written model function of PSS/E. As for the voltage instability, although generator current limiters, transformer's tap-changers and dynamic loads have been considered as the dominant components, the protection system is also very important because it may influence the system's dynamic behaviour. Hence a distance relay model implemented with the suggested method was added, and then the operating characteristics of the distance relay under the voltage instability condition were investigated.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.1
• /
• pp.28-35
• /
• 2010

This paper presents new Adaptive Linear Combination Structure (ADALINE) for tracking/estimating voltage-current phasor and frequency of power system. To estimate the phasors and frequency from sampled data, the algorithm assumes that orthogonal coefficients and speed of angular frequency of power system are unknown parameters. With adequate sampled data, the estimation problem can be considered as a linear weighted least squares (LMS) problem. In addition to determining the phasors (orthogonal coefficients), the procedure estimates the power system frequency. The main algorithm is verified through a computer simulation and data from field. The proposed algorithm is tested with transient and dynamic behaviors during power swing, a step change of frequency upon islanding of small generators and disconnection of load. The algorithm shows a very high accuracy, robustness, fast response time and adaptive performance over a wide range of frequency, from 10 to 2000 Hz.

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.116-118
• /
• 2004

In the power industry after restructuring of Power industry will be appeared on-site type business, power retail sales business, and power wholesales business, power dealing business, customer inclination business ＆ delivery of power facilities. Among them, power trade business, customer inclination business and on-site type business will be rapidly increased and occupied attention. In addition, it is forecasted to advent the broker, provider, market place, power marketer, system operator and generator as a main player. Meanwhile, it needs protection of existing power industry and activation of new energy market for accomplishment of restructuring of power industry.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.253-256
• /
• 2005

In this paper, doubly-fed induction-type wind power generation system simulation model for grid connection is developed. The simulation model is based on PSCAD/EMTDC and consists of rotor-blade, generator, power converter and controller. Simulation results are shown for the variable wind speed conditions. The simulation model can be utilized for study of actual interaction between wind turbine and grid for reliable operation and protection of power system.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.4
• /
• pp.289-296
• /
• 2001

Ni-P electroformed layers were investigated for developing a steam generator tube repair technology in PWRs. The effects of an additive, RPP (Reagent over Pitting Protection) and agitation on mechanical properties and microstructure of the layer were evaluated. The addition of the RPP showed to inhibit the formation of pores, to refine the grain size, and to increase the residual stress in the layer. However, the agitation of the solution during electroforming was observed to increase pores in local regions of the electroformed layer, resulting in decreasing its mechanical properties. The heat treatment of the layer at $343^{\circ}C$ for 1 hr. precipitated the very fine particles of Ni3P in the layer, which inhibited grain growth and increased microhardness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.581-583
• /
• 2017

Elliptic curve cyptography is relatively a current cryptography based on point arithmetic on elliptic curves and the Elliptic Curve Discrete Logarithm Problem (ECDLP). This discrete logarithm problems enables perfect forward secrecy which helps to easily generate key and almost impossible to revert the generation which is a great feature for privacy and protection. In this paper, we provide a lightweight Elliptic Curve Diffie-Hellman (ECDH) Key exchange generator that creates a 163 bit long shared key that can be used in an Elliptic Curve Integrated Encryption Scheme (ECIES) as well as for key agreement. The algorithm uses a fast multiplication algorithm that is small in size and also implements the extended euclidean algorithm. This proposed architecture was designed using verilog HDL, synthesized with the vivado ISE 2016.3 and was implemented on the virtex-7 FPGA board.