• 한국안전학회지
• /
• 제33권2호
• /
• pp.28-31
• /
• 2018

In display and semi-conductor manufacturing process, there are numerous unstable factors such as particle concentration, minimal vibration, changes in magnetic field, or electrostatic that becomes an issue to be managed and controlled. In the recent, X-ray ionization is widely used that is neutralized by separating air or gas molecules in the area where the static must be resolved. The mono-type of X-ray ionizer was not capable to be used in $8^{th}$ generation panels manufacturing plant due to its insufficient ionizing coverage since the panel itself is approximately in $2m{\times}3m$. To resolve the current problem, the development of new type called, "Multi-type X-ray ionizer" has resulted in covering enough ionizing space in $8^{th}$ generation panels industry. Comparing mono and multi types with MCNPX code simulation, the multi one indicates more X-ray flux, efficiency, and ionization performance in comparison with either a mono-type or multi-type in array format. In addition, the ionizing efficiency of overlapping area with multi-type showed 30% higher effectiveness rate as to the ordinary mono-type.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.413-421
• /
• 2012

This paper proposes the design and implementation of fluid flow generation system by using polypropylene(PP) water capture, which harvests electric energy from the kinetic energy of tidal current or water flow and drives the desired load, and applies it to the discharge drain of Hadong thermal power plant. This experimental system is composed of water captures, driving wheel, gear trains, 10[kW] synchronous generator, and three phase rectifying circuit which drives lamp load for test. The proposed water capturing system which is composed of water captures, rope and driving wheel, rotates as caterpillar according to water flow. This system is very easy to manufacture and more economical than another type of tidal current turbines such as conventional propeller and helical type. Also, we estimated the available fluid flow energy that can be extracted from the cooling water in discharge drain based on drain's cross-sectional area. Therefore, this paper confirms the validity of proposed fluid flow generation system with water captures and the possibility of its application for renewable energy generation in discharge drain of thermal power plant, from the obtained performance characteristic of this energy conversion system.

• 농촌지도와개발
• /
• 제16권4호
• /
• pp.1021-1048
• /
• 2009

Based on Rural living indicator -2005 survey data, in RDA this study attempted to investigate Rural Residents' real life satisfaction or identity model by the types of leisure consumption depending on each generation and explored the relationship between leisure consumption and the enhancement of self-identity/ interpersonal relationship, and that between leisure consumption satisfaction and real life satisfaction. Based on systematic random sampling with constructed questionnaires, 1,870 data were collected and analyzed. Overall, the results of this study showed that there are statistically significant differences between generation in leisure consumption. In detail, the findings of this study are as follows. The types of Rural Residents' leisure consumption can be divided into three styles including Semi-leisure type, Passive leisure type and Total leisure type consumption. The preferred types of leisure consumption of Rural Residents' were Semi-leisure type, Passive leisure type and Total leisure type in order. Except for times-pending leisure culture consumption, Semi-leisure type and Passive leisure type influenced on the enhancement of self-identity and interpersonal relationship, then the enhancement of self-identity and interpersonal relationship influenced on leisure consumption-satisfaction, and finally leisure consumption satisfaction influenced on real life satisfaction.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.468-476
• /
• 2000

Nowadays, ozone is mainly utilized for water treatment and home equipments. Although the demand for ozone is increasing, the ozone yield of silent discharge type ozonizer is low. Therefore, it is expected to improve the energy efficiency and ozone yield of an ozonizer. In this paper, a new ozone generation system is proposed. The 60[Hz] three-phase voltage is applied to three-phase superposed discharge type ozonizer(3PSDO) which has three electrodes(central, internal and external electrodes). There is no discharge pause time when three-phase voltage is applied due to 120-degree phase difference of applied voltage. The synergy effect of the three-phase superposed discharge type ozonizer is investigated by comparing with the three sort of single-phase discharge type ozonizer(1PDO). So, three-phase superposed discharge type ozonizer is able to obtain high ozone yield, and optimize discharge space, because this can increase the discharge power at low applied voltage.

• 한국태양에너지학회 논문집
• /
• 제33권1호
• /
• pp.96-105
• /
• 2013

This study aims to investigate the energy performance of apartment in respect of complex design, building type and generation house layout and finally to produce the guide line for energy saving design. To grasp the present condition and problem about this subject, apartment building types were examined and representative types were extracted. Considering azimuth angle, private area, and generation number, building type of the subject apartment was classified in detail, energy simulation was conducted, and the effect to energy cost was compared. In the research, using VE energy simulation program, the heating and cooling load were calculated and converted to energy cost. It is expected that this analysed results will be basic data for the more integrated study. Research consequence can be summarized as follow: 1) Energy cost is compared according to several azimuth in plank '一' type apartment. As the results, calculated gas cost is the best in $49^{\circ}$, but total cost is in $-31^{\circ}$. 2) Apartment buildings of tower types are compared, it is resulted that 'Y' type (azimuth $-7^{\circ}$, $-20^{\circ}$) is the best in gas cost, but the total cost is worst because of high cooling load.

• 한국HCI학회논문지
• /
• 제5권1호
• /
• pp.25-35
• /
• 2010

본 논문에서는 한국어 문장 유형을 자동으로 분류하는 방법을 제안하고 한국어-수화 변환과 한국어 음성 합성 분야에서 문장 유형 정보가 자연스러운 수화 표현과 음성 표현을 생성하는데 이용되는 과정을 보인다. 한국어에서 문장 유형은 크게 평서문, 명령문, 청유문, 의문문, 감탄문의 다섯 가지로 분류되는데, 기존의 방법으로는 대화체 문장에서 동일한 문장이 여러 가지 유형으로 해석되는 중의성의 문제가 발생한다. 본 논문에서는 문장 내에서 형태소 및 구문단위의 다양한 단서들을 활용하여 이를 해결하는 방법을 제안하며, 실험 결과 본 논문에서 제시한 문장 유형 분류 시스템이 만족할 만한 성능을 보이는 것을 확인하였다. 이를 이용하여 한국어-수화 변환 시스템에서 문장 유형에 따라 수화의 비수지신호가 다르게 표현되는 현상을 처리하는 과정과 한국어 음성 합성 시스템에서 문장 유형에 따라 문장의 문미 억양이 변하는 현상을 처리하는 과정을 제시한다. 문장 유형 정보를 음성 합성과 수화 자동 생성에 이용하는 것은 기존에는 연구되지 않았던 방법으로, 좀 더 자연스러운 음성과 수화 표현을 생성하는데 중요한 역할을 할 것으로 기대한다.

• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2503-2508
• /
• 2013

최근 20~30년사이 수도권 1인가구의 비율은 크게 증가하였으며, 총 인구의 감소에도 불구하고 1인가구수는 지속적으로 증가할 것으로 예상된다. 그러나 국내 교통분야에서는 1인가구 증가가 교통분야에 미치는 연구가 미흡한 실정이다. 본 연구는 수도권 가구통행실태조사를 활용하여 가구 속성별로 가구규모에 따른 통행발생의 차이를 알아보기로 하였다. 연구방법으로는 수도권 가구통행실태조사 자료에서 가구 속성과 가구원 속성, 통행 속성에 대하여 가구규모별로 통행발생횟수(/일/인)을 산출하였다. 유의성검토를 거쳐 1인가구와 타 규모(2인 이상)가구와의 비교를 통하여 1인가구만의 통행발생 특성을 분석하였다. 연구 결과로는 전체적으로 1인가구의 통행발생은 타 규모 가구의 통행발생보다 높게 나타났으며, 주택종류, 거주형태, 지역, 통행수단 속성에서도 차별된 통행발생 특성을 보여주었다. 본 연구의 결과가 1인가구의 통행발생 특성을 반영한 통행발생모형 구축 등 교통정책개발에 이바지하길 기대하여본다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.688-692
• /
• 2007

Solar thermal power generation allows additional benefits of cheap thermal storage and easy hybridization with other fossil fuel-driven power generation. KIER has been performing the project for solar thermal chemical reaction hybrid power generation. The project is to build and operate the first solar thermal chemical reaction hybrid power generation system in Korea. For concentrating solar thermal energy $m^2$ dish type concentrator was adapted and a heliostat is installed for reflecting horizontal insolation to the dish concentrator. At the moment building the dish concentrator including mirror and heliostat with sun tracking system was completed and it's performance are being closely evaluated. This paper will introduce some detailed designs and construction procedures which we have experienced so far.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.85-90
• /
• 2012

In this paper, it was investigated experimentally that diameter and polarity variation of corona wire electrode affected to ozone generation of the ozone generator using a wire-to-plate type electrode. The change in the diameter(D) of the corona wire electrode has a great effect upon ozone generation, higher influence appears in the positive corona discharge than the negative corona discharge. In the case of D=0.50[mm], maximum ozone generation and power efficiency could be obtained. However, in the case of smaller D than this, the ozone generation and efficiency decreases slowly and in the case of larger D, the ozone generation decreases rapidly. It means performance decline as an ozone generator. Therefore, ozone generation and power efficiency would increase through simple optimization of the corona electrode specification.

• 유기물자원화
• /
• 제14권3호
• /
• pp.91-100
• /
• 2006

본 연구에서는 돼지 분 뇨 및 폐수의 오염물 부하를 조사 및 분석함으로써 다양한 형태의 돼지 돈사로부터 발생 및 배출되는 오염물 부하 원단위를 산정한 결과는 다음과 같다. 오염물질의 발생부하 원단위는 돼지의 성장단계에 비례하여 증가하였으나, 돈사의 형태에 따른 발생부하 원단위는 각 돈사별 평균값을 고려할 때 큰 차이를 보이지 않았다. 3계절과 생체 중량을 고려한 평균 분뇨 발생량은 분이 1.49kg/head/d, 뇨가 3.08kg/head/d로서 총 4.57kg/head/d가 발생하였다. 돈사의 형태와 계절을 고려한 최종적인 평균 오염물질 발생부하 원단위는 BOD 199.5g/head/d, $COD_{cr}\;413.5g/head/d$, T-N 27.8g/head/d, T-P가 5.3g/head/d로 나타났다. 시멘트 돈사에서 배출되는 폐수의 배출부하 원단위는 BOD 31.3g/head/d, $COD_{cr}\;95.6g/head/d$, T-N 8.9g/head/d, T-P가 3.1g/head/d로 조사되었다. 분의 수거율(80%, 90%)을 고려한 분의 발생부하 원단위와 시멘트 돈사의 폐수발생 원단위의 합을 슬러리 돈사의 배출부하 원단위와 비교 시, 오염물질과 항목별로 다소의 차이는 있으나 거의 유사하였다.