• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.64-69
• /
• 2009

This paper aims at enhancing the electric production efficiency of photovoltaic(PV) system. The electrical power of PV system is proportional to light intensity on a PV module surface. In this paper, we apply two types of systems to enhance power generation efficiency. First, of all, concentring sunlight using specular surface and one-axis tracking system which traces the sun with vertical direction are applied in this project. From this, we analyze the fixed type method and power generation efficiency.

• 환경위생공학
• /
• 제13권3호
• /
• pp.148-157
• /
• 1998

Leachate is a result of the percolation of precipitation, uncontrolled runoff, and irrigation water into the landfill and can also include water initially contained in the waste as well as infiltrating groundwater. Behaviour of leachate by rainfall was studied to evaluate the variation of leachate generation and contaminants by rainfall in Sudokwon Landfill from January 1998 to October 1998. The quantity of leachate generated was measured with a flow meter, and the concentrations $BOD_5$, CODcr, T-N, $NE_3-N$, SS of leachate were also measured. Principal outcome obtained in this study are as follows : the quantity of leachate generated was the highest on August, the highest leachate generation volume in this period was 11,913㎥ and the lowest was $6,261m^3$. Although the similar amount of precipitation of 80mm applied to the two samples, there were difference in leachate generation due to precipitation duration, precipitation frequency, wet condition of solid wastes. As the result of regression analysis, the correlation coefficients(r) between the quantity of leachate generated and precipitation were 0.823, 0.976 between $BOD_5$ and CODcr, 0.992 between T-N and $NE_3-N$. As the quantity of leachate generated increased 48%, the concentration of $BOD_5$ and CODcr decreased 51% and 50% respectively. Therefore it was showed that the pollutant concentrations in leachate were diluted by precipitation. The concentrations of $BOD_5$ and COBcr in the rainy season were 2000~4000mg/1, 4000~6000mg/1 respectively, and 1000~3000 mg/1, 3000~5000 mg/l in the dry season. The loading of SS, $BOD_5$, CODcr(kg/month) on July was increased by 2.9 times, 2.8 times, 2.2 times with a basis on March. Therefore countermeasure of treatment facilities according to increase of loading by rainfall in summer is necessary.

• 한국건설관리학회논문집
• /
• 제5권4호
• /
• pp.107-114
• /
• 2004

4D 모델은 프로젝트 수행 이전에 다양한 공정대안을 비교 검토해볼 수 있는 기능을 제공하나 아직 그 활용이 미비한 실정이다. 이는 4D 모델의 구현에 수반되는 기술적, 경제적 문제에 기인하는 바 크다. 본 논문에서는 3D모델 정보의 활용을 통해 이러한 문제의 해결방안을 제시하였다. 즉, 기 생성된 3D 모델 정보를 가공하여 동일한 3D 모델에 대해 여러 가지 공정대안을 신속하게 생성해내는 공정 자동생성 기능을 이용함으로써 기존 4D시스템 연구에서 문제점으로 지적되었던 정보 변경에 따른 4D 모델 재구현 문제를 상당부분 개선하였다. 또한, 특정 작업기간에 따른 소요물량을 간편하게 산출해내는 물량정보 검색 기능을 통해 4D 모델의 대안검토 기능을 보완하였다. 특히 공정 자동생성 기능에서는 수평 및 수직적 우선순위의 조정을 통해 부재간, 층간 우선순위를 결정할 수 있도록 함으로써 공정순서를 신속하게 생성해낼 수 있는 환경을 제공하였다. 이것은 3D 모델이 변경되지 않은 상태에서 다양한 공정대안의 신속한 생성을 통한 비교 검토에 효과적으로 활용할 수 있으며, 3D 모델이 변경된 경우에도 4D 모델 생성을 위한 이후의 작업과정을 손쉽게 진행시켜 나갈 수 있는 장점이 있다. 아울러 3D 모델로부터 생성되는 물량정보와 공정계획 결과로부터 생성되는 일정정보를 연계시킴으로써 간편하게 일정별 소요물량 정보를 검색할 수 있게 하였다.

• 기술사
• /
• 제19권1호
• /
• pp.25-32
• /
• 1986

The number of visiters to Bukhan Mt. national park, generation quantity of solid waste and collection system were researched to consider a counterplan for the pollution control of the national park and study for developing the effective treatment of solid waste was tried through the proximate analysis of each component containing. Results obtained in this study were summerized as follows; The great part of visitors go on an excursion to the Bukhan Mt. national park during July and August and also, the solid waste was generated nearly a half of the total amount at the same period. The major collection facilities in the national park were waste basket and incineration box. But the incineration box was too large in volume and very far in distance, and its collection period was irregular, so it was cause to the congestion of solid waste and bad smell and dirty. Therefore, to complete collection of solid waste, we must set up the waste basket which able to find within 40～50m from the origination place of solid waste and induce the visitors to throw the solid waste. It was obtained as moisture content: 48.5 wt%, volatile solid: 28.4wt％, fixed solid: 23.1 wt％, lower heating value: 1,320kca1/kg from experimental analysis of solid waste. According to this analysis, the incineration operation is possible, but the generation quantity of solid waste was too small to construct incineration plant for heat recovery. It was found that it is suitable for the aerobic composting by mixing with the night soil which generate in the national park after the recovery of resources such as metals, glasses and plastics.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.579-585
• /
• 2003

Recently the utilization of the ozone dissolved de-ionized water(DI-O3 water) in semiconductor wet cleaning process to replace the conventional RCA methods has been studied. In this paper, we propose the water-electrode type ozone generator which has the ozone gas characteristics of the high concentration and high purity to produce the high concentration DI-O3 water for the silicon wafer surface cleaning process. The ozone generator has the dual dielectric tube structure of silent discharge type and the water is both used to electrode and cooling water. We investigate the performance of the proposed ozone generator which has the design goal of the concentration of 7[wt%] and ozone generation quantity of 6[g/hr] at flow rate of 1[$\ell$/min). The experiment results show that the water electrode type ozone generator has the characteristics of 8.48[wt%] of concentration, 8.08[g/hr] of generation quantity and 76.2[g/kWh] of yield and it's possible to use the proposed ozone generator for the DI-O3 water cleaning process of silicon wafer surface.

• 신재생에너지
• /
• 제8권1호
• /
• pp.8-17
• /
• 2012

The Korean government pushed ahead various policies to disseminate photovoltaic (PV), wind power, small hydro, bio-fuel, etc. Renewable energy system (RES) budget of the Korean government increased from 118 billion won of 2003 to 876.6 billion won of 2010. The R&D budgetary supports for RES increased by 6.8 times in the period 2003-2010. It is necessary to confirm RES budget expenditure that renewable energy promotion policy makes good performance evaluated in quantity level. This paper made Input-Output Table 2009 contains photovoltaic power generation equipment industry as a dependent sector and analyzed induced production effect by demand of photovoltaic power generation equipment industry. From the empirical analysis result, additional demand in photovoltaic power generation equipment induced 1.932 times of induced production in Korea. Each of industry sector has positive induced production from the additional demand in photovoltaic power generation equipment. Renewable energy promotion in photovoltaic power generation is considered together with industry policy as the option to sustain economic growth.

• 비파괴검사학회지
• /
• 제29권1호
• /
• pp.10-14
• /
• 2009

초음파 적외선 비파괴 열화상 검사기술의 발열 메커니즘은 정확히 규명되지 않았으나, 열-기계 연성효과와 결함 계면 사이의 마찰효과가 주요한 원인인 것으로 추정되고 있다. 본 논문에서는 피로균열을 갖는 알루미늄 합금 시험편에서 결함을 검출하고, 실험조건으로부터 각각의 메커니즘에 따라 온도 변화를 수치 예측하였다. 시험결과와 수치예측 결과로부터 발열의 주요한 원인이 마찰이라는 것을 밝혔다.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.181-187
• /
• 2013

Performance of DI diesel engine with high fuel injection method is directly related to its emission characteristics and fuel consumption. In this study, numerical model of 3rd generation piezo-driven injector was designed to analyze the hydraulic performance. Also the injection response characteristics was investigated by using the AMESim simulation code. From this study, it was shown that 3rd generation piezo-driven injector had a faster response and had better control capability due to its hydraulic bypass-circuit that has potential to higher hydraulic characteristics and improved accuracy of injected fuel quantity.

• 에너지공학
• /
• 제13권2호
• /
• pp.128-132
• /
• 2004

본 연구에서는 급전계획의 파레토최적해를 구하는 새로운 방법을 제시하였다. 이를 위하여, 고찰기간에 대해 총 오염물질배출량을 고려하여 최적경제부하배분을 할 수 있는 동적계획법을 도입하였으며, 최적급전계획의 결과를 군으로 얻을 수 있는 파레토최적해를 얻는 방법을 개발하였다. 이 결과, 의사결정자는 파레토최적해를 얻을 수 있으며, 이중에서 하나의 해를 선택하여 사용할 수 있게 되었다. 제안한 방법을 시험계통에 적용하여 유용성을 검증하였다.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1496-1503
• /
• 2009

The United Nations Framework Convention on Climate Change (UNFCCC) is an international environmental treaty to stabilize greenhouse gas concentrations in the atmosphere. In order to fulfil the commitments of the countries in an economically efficient way, the UNFCCC adapted the emission trading scheme in the Kyoto Protocol. If the UNFCCC's scheme is enforced in the country, considerable changes in electric power industry are expected due to the imposed greenhouse gas emission reduction. This paper proposes a game theoretic model of the case when generation companies participate in both competitive electricity market and emission market simultaneously. The model is designed such that generation companies select strategically between power quantity and greenhouse gas reduction to maximize their profits in both markets. Demand function and Environmental Welfare of emission trading market is proposed in this model. From the simulation results using the proposed model the impact of the emission trading on generation companies seems very severe in case that the emission prices are significantly high.