• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.53-64
• /
• 1994

Rouge cutting process takes the major portion of machining operation using NC milling machine. Especially, most of the machining time is spent in this process when molds are machined. Therefore, an efficient algorithm for generating the tool path for rough cutting is suggested in this paper. The first step of the procedure is getting the volume to be machined by applying the Boolean operation on the finished model and the workpiece which have been modeling system. Basic principle of determining machining procedure is that a large tool should be used at the portion of the simple shape while a small tool should be used at the complex portion. This principle is realized by representing the volume to be machined by an octree, which is basically a set of hexahedrons, and matching the proper tools with the given octants. When the tools are matched with the octants, the tool path can be derived at the same time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.722-727
• /
• 2004

This paper includes the comparative study between Cr plating and nitriding process with an aim at improving corrosion, wear and maintainability for KNR(Korean Next Generation Rifle) 5.56mm barrel. The endurance test was conducted to compare the performance of standard barrel, Cr plating barrel and nitriding barrel. Main activities are described as follows; optimal Cr plating and nitriding process set-up for KNR 5.56mm barrel; durability test of each barrel(20,000 rounds); salt water immersion test; dispersion, initial velocity, inner diameter data acquisition. According to the results of this firing test, Cr plating barrel is superior to standard barrel and nitriding barrel in view of corrosion, wear and maintainability

• 전자공학회논문지B
• /
• 제28B권10호
• /
• pp.822-830
• /
• 1991

In this paper, we propose a new process for ultrasonic B-mode image considering the sound field effects of a concave circuit focused transducer, and aim to remove the speckle pattern which cause the blurring on boundary in ultrasonic B-mode image. We discuss in detail the conception of speckle pattern generation, and the frequency compounding method which is applied to the process for getting a speckle reduced B-mode image. Through the computer simulation, we define the meaning of speckle region, and show the results of reduced speckle pattern. It is discovered in the results that the frequency compounding method is very effective for boundary detection and that the application of the method is limited by various conditions.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 춘계학술대회
• /
• pp.127-133
• /
• 2003

One of the recent trends of cockpit development is to integrate (ore part of whole cockpit and compartment. The goal of this study is to develop and Analysis of User's Convenience a cockpit prototype based on the design guide of cockpit integration. module. The process of this study has been followed analyzing development trend of next generation Automotive cockpit, extracting the design factor needed to making integration module and laying down the design guide of cockpit integration module. After that process, next-generation Automotive cockpit has been embodied as graphical image designing. Henceforth, applying this module to real will be considered after evaluation of utilization. This study is indicated that one example for evaluation of utilization.

• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.25-40
• /
• 1997

This study deals with an autonomous generation of simulation codes for the design of processes of c CIM system based on the concept of model transformation. We assume we have a functional model of an organization which is developed using the well-known IDEF0 methodology. Then, a modeling methodology, called PROWD(PRocess flOW Description), is suggested to develop the flow processes of the organization. To Derive simulation specifications for the transformed PROWD model, we define a module of a "unit system" for each activity of PROWD model. Then specifications for system entities and resources are derived from input/control/mechanism/output and entity flows of PROWD model. Entitiy queues are defined from the sates and events of unit systems. Finally, SIMAN model frame is generated from those specifications through a suggested algorithm. The implementability and validity of the proposed approach is tested by developing a prototype of a computer-assisted design system on the operation processes of FMS installed at SNU-ASRI (Seoul National University-Automation and Systems Research Institute).nstitute).

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.228-240
• /
• 2012

Morphing is a geometric interpolation technique that is often used by the animation industry to transform one form into another seemingly seamlessly. It does this by producing a large number of 'intermediate' forms between the two 'extreme' or 'parent' forms. It has already been shown that morphing technique can be a powerful tool for form design and as such can be a useful addition to the armoury of product designers. Morphing procedure itself is simple and consists of straightforward linear interpolation. However, establishing the correspondence between vertices of the parent models is one of the most difficult and important tasks during a morphing process. This paper discusses the mesh-merging method employed for this process as against the already established mesh-regularising method. It has been found that the merging method minimises the need for manual manipulation, allowing automation to a large extent.

• Genomics & Informatics
• /
• 제11권4호
• /
• pp.191-199
• /
• 2013

High-throughput next-generation sequencing (NGS) technology produces a tremendous amount of raw sequence data. The challenges for researchers are to process the raw data, to map the sequences to genome, to discover variants that are different from the reference genome, and to prioritize/rank the variants for the question of interest. The recent development of many computational algorithms and programs has vastly improved the ability to translate sequence data into valuable information for disease gene identification. However, the NGS data analysis is complex and could be overwhelming for researchers who are not familiar with the process. Here, we outline the analysis pipeline and describe some of the most commonly used principles and tools for analyzing NGS data for disease gene identification.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.155-165
• /
• 2013

For the service and creation of new space, the next generation smart device for interactive space using tailor-made contents process serve as an opportunity for the growth of new special display due to the integration of the latest digital technology. The application of next generation technology is in the field that most people expect. So, this thesis serving as the beginning, it is hoped that the smart mirror and wall industry in Korea will play a practical and academic momentum. An interactive environment which is the smart device can be realized when space displays based on smart device built on the experience of the user can provide various tailor-made processes such as academics, performances, meetings, virtual experience, exhibits and promotion, and through this a strategic direction was suggested for the development of each field.

• 한국항공운항학회지
• /
• 제6권1호
• /
• pp.51-69
• /
• 1998

This paper was studied to present a model for the application of AHP to the selection of fighter planes. For this study, a questionnaire was developed in respect to the criteria of fighter plane and given to 70 reserved officers who had experienced as fighter pilots in Republic of Korean Air Force (ROKAF) to ask their opinions about the candidates for the next-generation fighter planes of the ROKAF. The AHP software developed by Korean Advanced Institute of Science Technology (KAIST) was used to process the data. The result was analyzed by the criteria of selecting military aircraft and the several alternatives for the next-generation fighter planes.

• 한국군사과학기술학회지
• /
• 제7권1호
• /
• pp.5-12
• /
• 2004

This paper includes the comparative study between Cr plating and nitriding process with an aim at improving corrosion, wear and maintainability for KNR(Korean Next Generation Rifle) 5.5mm barrel. The endurance test was conducted to compare the performance of standard barrel, Cr plating barrel and nitriding barrel. Main activities are described as follows; optimal Cr plating and nitriding process set-up for KNR 5.56mm barrel; durability test of each barrel(20,000 rounds); salt water immersion test; dispersion, initial velocity, inner diameter data acquisition. According to the results of this firing test, Cr plating barrel is superior to standard barrel and nitriding barrel in view of corrosion, wear and maintainability.