• Journal of the Korean GEO-environmental Society
• /
• v.5 no.4
• /
• pp.13-24
• /
• 2004

This study was carried out to plan the prevention of the generation and discharge of Acid Rock Drainage (ARD). The Acid Base Accounting(ABA) test was performed for geological materials such as pit wall, waste rock and stream sediments near the Imgi abandoned pyrophyllite mine in Busan, Korea. In addition, hydraulic characteristics were tested with the disk tension infiltrometer around the waste rock dump. Maximum Potential Acidity(MPA) of geological materials near the Imgi mine was 246.942kg $H_2SO_4/t$, and maximum Acid Neutralising Capacity(ANC) was 8.7kg $H_2SO_4/t$. These results indicate the pit wall and waste rock, except most of stream sediments are acid generating geological materials. These have salt and free hydrogen ion which resulted from oxidation of sulfides. Hence they could be convert rain water to acid rock drainage. Although the waste rock dump of the Imgi mine have very low infiltration rate, slopes of the waste rock dump have many "V" type erosion gullies and multi-layers. These gullies and multi-layers have coarse clastic particle layers which have very large hydraulic conductivity. Through this coarse clastic particle layer a large part of rain flow into ground. And also this layer could function as aeration path which induced oxidation of sulfide minerals and generation of ARD continuously.

• The KIPS Transactions:PartB
• /
• v.9B no.3
• /
• pp.359-368
• /
• 2002

In this paper, we propose effective boundary line extraction algorithm for moving objects by matching error image and moving vectors, and fast tracking algorithm for moving object by partial boundary lines. We extracted boundary line for moving object by generating seeds with probability distribution function based on Watershed algorithm, and by extracting boundary line for moving objects through extending seeds, and then by using moving vectors. We processed tracking algorithm for moving object by using a part of boundary lines as features. We set up a part of every-direction boundary line for moving object as the initial feature vectors for moving objects. Then, we tracked moving object within current frames by using feature vector for the previous frames. As the result of the simulation for tracking moving object on the real images, we found that tracking processing of the proposed algorithm was simple due to tracking boundary line only for moving object as a feature, in contrast to the traditional tracking algorithm for active contour line that have varying processing cost with the length of boundary line. The operations was reduced about 39% as contrasted with the full search BMA. Tracking error was less than 4 pixel when the feature vector was $(15\times{5)}$ through the information of every-direction boundary line. The proposed algorithm just needed 200 times of search operation.

• Journal of Intelligence and Information Systems
• /
• v.11 no.1
• /
• pp.35-51
• /
• 2005

The wide spread of Internet and rapid development of e-commerce-related technology have brought sweeping changes on the traditional commercial transactions. Accordingly, many efforts to transform these transactions electronically under e-commerce environment have been carried out. As most transactions are usually made through negotiations, the function of automated negotiation is also required in the e-commerce environment. This paper aims to develop the method to generate and evaluate the multi-attribute negotiation proposals for automated negotiation systems. To this end the related articles are reviewed and the method dealing with e-negotiation strategy is suggested. In this method, the seller generates his or her own negotiation proposal and then evaluates the buyer's proposal based on SAW (Simple Additive Weighting Method), one of the MADM (Multi Attribute Decision Making) methods. To verify the suggested method, a case study is conducted in the order-based manufacturing environment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.9-15
• /
• 2006

For the accurate safety assessment of potential radioactive waste disposal site which is located in the crystalline rock it is important to simulate the mass transportation through engineered and natural barrier system precisely, characterized by porous and fractured media respectively. In this work the methods to construct discrete fracture network for the analysis of flow and mass transport through fractured-porous medium are described. The probability density function is adopted in generating fracture properties for the realistic representation of real fractured rock. In order to investigate the intersection between a porous and a fractured medium described by a 2 dimensional rectangular and a cuboid grid respectively, an additional imaginary fracture is adopted at the face of a porous medium intersected by a fracture. In order to construct large scale flow paths an effective method to find interconnected fractures and algorithms of swift detecting connectivities between fractures or porous medium and fractures are proposed. These methods are expected to contribute to the development of numerical program for the simulation of radioactive nuclide transport through fractured-porous medium from radioactive waste disposal site.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.3
• /
• pp.61-69
• /
• 2010

Disasters have been diversifying and the scale of disaster has been increasing worldwide due to the global warming and urbanization. Consequently, it is essential to establish the systematic disaster management because the scale of damages has been rapidly increasing. Nowadays, the importance of the standardized disaster management have been realized internationally due to the 9.11 terror and Tsunami. Also, the activities of research and development to utilize and establish the disaster management standards have been increasing. This study mainly focused on generating an efficient operating manual to support the systematic disaster management of the central administration office based on disaster management standard in South Korea. Firstly, the activities and status of disaster management performed by the central administration office were investigated. Accordingly, libraries of work, functions, organizations, references and behavior for disaster management were designed. Then, a method to make the efficient operation manual based on the constructed libraries was presented to maximize the efficiency of disaster management. This emergency operation manual could support the systematic disaster management by defining the work, function, references and the codes of conduct. Thus, central administration office would be able to define methods and procedures from preparation to recovery through the utilization of the operation manual.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.25-38
• /
• 2017

This study investigates non-native speakers(NNS) of English use of backchannels with beginner-intermediate learners' use of 'uh', 'um(uhm)', 'and' and 'hm' suggesting a view as a possible pedagogical implication. The initial aim of this study was to learn this phenomenon and observe their conversation patterns to compare with previous studies. Based on the previous findings, the analyzed data using conventional Conversation Analysis (CA) methods indicate the possible presence of L1 topic markers, '-un' and '-nun' in the form of L2 backchannel tokens when uttered by beginning and intermediate level speakers of English and the presences of L2 backchannel tokens appear only in front of noun phrases. Additionally, these same words with these tokens and when translated back to Korean also require topic markers of '-un' and '-nun.' Finally, This study discusses possible pedagogical implications with the initial analysis of backchannel tokens for Korean EFL learners. In addition, the ultimate goal of this study is to refine this analysis with follow up experiments to validate this investigation into a working hypothesis generating discussions of this backchannel phenomenon from being viewed as a hindrance to as an positive influence that needs to be understood.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.110-122
• /
• 1993

When voice is transmitted through packet switching network, there needs a overload control, that is, a control for the congestion which lasts short periods and occurrs in local extents. In this thesis, we analyzed the performance of the statistical packet voice multiplexer using the overload control strategy by bit dropping. We assume that the voice is coded accordng to (4,2) embedded ADPCM and that the voice packet is generated and transmitted according to the procedures in the CCITT recomendation G. 764. For the performance analysis, we must model the superposed packet arrival process to the multiplexer as exactly as possible. It is well known that interarrival times of the packets are highly correlated and for this reason MMPP is more suited for the modelling in the viewpoint of accuracy. Hence the packet arrival process in modeled as MMPP and the matrix geometric method is used for the performance analysis. Performance analysis is similar to the MMPP IG II queueing system. But the overload control makes the service time distribution G dependent on system status or queue length in the multiplexer. Through the performance analysis we derived the probability generating function for the queue length and using this we derived the mean and standard deviation of the queue length and waiting time. The numerical results are verified through the simulation and the results show that the values embedded in the departure times and that in the arbitrary times are almost the same. Results also show bit dropping reduces the mean and the variation of the queue length and those of the waiting time.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.419-432
• /
• 2010

Various torque generating devices have been developed and employed to apply a proper torque. These devices are usually calibrated by the manufacturer to apply appropriate torque levels for their specific implants and attachments. The purpose of this investigation was to determine and compare the accuracy of the torque controllers. In this study, 4 types of torque controllers were used; torque limiting device(TLD), torque indicating device(TID) and contra angle torque driver(CA), electronic torque controller(ETC). Digital torque gauge was employed to measure the de-torque value. Thirty cycles of tightening and loosening were repeated with each torque controller. All implant torque controllers have shown slight errors and deviations. The contra angle torque driver exhibited the most accurate data. In the limitation of this study, it would be recommended that the implant torque controllers should be checked whether uniformed and precise torque can be generated and a measuring error should be corrected.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3139-3145
• /
• 2016

Cancer is the leading cause of morbidity and mortality worldwide, characterized by irregular cell growth. Cytotoxicity or killing tumor cells that divide rapidly is the basic function of chemotherapeutic drugs. However, these agents can damage normal dividing cells, leading to adverse effects in the body. In view of great advances in cancer therapy, which are increasingly reported each year, we quantitatively and qualitatively evaluated the papers published between 1981 and December 2015, with a closer look at the highly cited papers (HCPs), for a better understanding of literature related to cytotoxicity in cancer therapy. Online documents in the Web of Science (WOS) database were analyzed based on the publication year, the number of times they were cited, research area, source, language, document type, countries, organization-enhanced and funding agencies. A total of 3,473 publications relevant to the target key words were found in the WOS database over 35 years and 86% of them (n=2,993) were published between 2000-2015. These papers had been cited 54,330 times without self-citation from 1981 to 2015. Of the 3,473 publications, 17 (3,557citations) were the most frequently cited ones between 2005 and 2015. The topmost HCP was about generating a comprehensive preclinical database (CCLE) with 825 (23.2%) citations. One third of the remaining HCPs had focused on drug discovery through improving conventional therapeutic agents such as metformin and ginseng. Another 33% of the HCPs concerned engineered nanoparticles (NPs) such as polyamidoamine (PAMAM) dendritic polymers, PTX/SPIO-loaded PLGAs and cell-derived NPs to increase drug effectiveness and decrease drug toxicity in cancer therapy. The remaining HCPs reported novel factors such as miR-205, Nrf2 and p27 suggesting their interference with development of cancer in targeted cancer therapy. In conclusion, analysis of 35-year publications and HCPs on cytotoxicity in cancer in the present report provides opportunities for a better understanding the extent of topics published and may help future research in this area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.131-144
• /
• 1997

Traffic jam densified day by day is phenomenon to occur lack of the road capacity in comparison with traffic density, but lack of the road cannot be concluded by main cause of traffic ism. Because the central function of a city would be concentrated upon the downtown and traffic demand would not be evenly distributed by the classification of an hour. Therefore, this study based on the fact that each driver will select the route generating traffic delay very low when path choice from origin to destination in travel plan estimating the quality of passage could be maintained the speed he want will approach to a characteristic grasp of a road, traffic, driver changing every moment by traffic-demand of road increased as a geometrical series with analysis a classification of a street, a intersection along the path on traffic density and highway capacity analysis the path using GIS techniques about complex street network, also will get the path of actual optimum for traffic delay trend creating under various condition the classification per a hour, a day of week and an incident through network such as analysis for traffic generation zone adjacent about street, intersection, afterward will expect the result increasing efficiency of the road-use through a good distribution of traffic by optimum-path choice, accordingly will prepare the scientific, objective, appropriate basis to decide the reasonable time of a road-widen and expansion through section analysis along a rate of traffic volume vs. road capacity.