• Journal of the Korea Convergence Society
• /
• v.8 no.4
• /
• pp.273-278
• /
• 2017

Contemporary art make-up is being widely developed in line with the trends of individualization and differentiation departing from basic desires or logical thinking about the desires of human beings who ultimately pursue beauty and experiencing diversified convergence and integration befitting customer needs. Cubism that has been playing a central role at the center of art history in the $20^{th}$ century can act as a good material based on creativity with regard to expression of the art make-up. In this regard, the study was focused on creating new concepts of design and novel areas of expression by combining expressive methods of cubism with art make-up to suggest an art mask. As for a method of the study, cubism and art make-up were examined based on preceding studies, Internet data and technical books, and the expression method of cubism was divided into plural points of view, partition of shape and collage and motivated the works of Picasso for the purpose of art mask-converged design. As a result of the study, it was found out that the expression method of cubism was applicable to the art make-up, and creative art make-up converged design could be generated to make a suggestion. In this regard, it is hoped that further studies will be facilitated and that this study can be instrumental in developing art make-up design.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.25-31
• /
• 2018

In this study, the Controlled Low Strength Material (CLSM) was investigated to utilize the bottom ash and fly ash generated in the Circulating Fluidized Bed Combustor (CFBC). It was confirmed that the CFBC fly ash (CFBC-F) and CFBC bottom ash (CFBC-B) had an irregular particle shape through SEM measurement. According to the results of the hazard analysis, it was also confirmed that they were environmentally safe. In the case of mixing with CFBC-F, the unit quantity was increased. Regarding the rate of change of length, shrinkage in the range of -0.05~0.50% occurred in the air dry curing condition and expansion in the range of 0.1~0.6% in the sealed curing condition. Compressive strength was increased in the sealed curing condition compared to the air dry curing condition because there was enough moisture for hydration reaction in the long term. Therefore, the results of this study are likely be used as basic research data of mine filler materials.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.497-503
• /
• 2004

Numerical simulation of blood flow has been conducted based on real vessel geometries generated front DICOM medical images of abdominal and iliac bifurcated arteries of a healthy man. A program was developed to read cross sectional images of the three dimensional arteries and smoothly extract boundary coordinates of vessels. Commercial programs were employed for mesh generation and flow simulation. Pressures, velocities, and flow distributions were found to lie within normal physiological ranges. Peak velocity measured in the iliac artery by ultrasound was 20% smaller than that obtained by simulation. The trend of velocity variation in a cardiac cycle was fairly similar between the simulation and the ultrasonic measurements. Simulation based on real vessel geometry of individual patient provides information on pressure, velocity, and its distribution in the diseased arteries or arteries to be surgically treated. The results of simulation may help surgeons to better understand hemodynamic status and surgical need of the patient by revealing variation of the hemodynamic parameters. Futhermore, they may serve as basic data for surgical treatment of arteries. This research is expected to develop to a program in the future that early diagnose atherosclerosis by showing distribution of a hemodynamic index closely related to atherosclerosis in arteries.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.10-16
• /
• 2003

The purpose of this study was to investigate the scope of standard color perception for Americans and to compare the differences in color perception between Korean and American undergraduates. Sixty male and fifty-one female American undergraduates were selected as a random sample. Color perception was tested with the naked eyes. Minolta Chroma Meter CR 300 was used for physical measurement of the color. Based on the objective of this study and the data generated the following results were drawn: 1) We found no distinctive difference in color perception by different eye colors. 2) Color perception of American undergraduates is largely classified into four different groups: simple group includes Yellow, Green, Blue, White, Gray, and Black, X(-axis)group includes Yellow Red, Y(-axis)group includes Blue Green, Purple, complex group includes Yellow Red, Purple Blue. 3) The differences in color perception between the two undergraduate groups were found to be significant with four colors: Yellow Red, Green, Blue, and Purple. 4) There is a wide difference between the values of standard color and inn percept color. When undergraduates in both countries were compared, it turned out that Korean students were more accurate than Americans in color perception. 5) American students perceived Red, Yellow, and Green colors relatively correctly, but showed an extremely low degree of accuracy in Blue and Purple Blue color perception.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.97-111
• /
• 2012

This study aims to find a proper construction cost calculation method by comparing unit prices of cost estimate in landscape construction among other public ordering construction projects. There were 7 out of 12 items from the actual work cost in the first half of 2011 were compared. The 12 items were classified as landscape Architectural construction and the 7 items were the approximate standard. As applied construction types, the comparable 35 items out of the 80 actual work cost items applied to 5 sites were compared to the unit price of the standard quantity per unit in March 2011, which was the approximate standard. Actual construction rate of the 7 items in the category of landscape sector was 104.86% for each item and 92.09% as a total construction cost. The high actual construction rate was caused by the high rate of seed spray depending on the status of applying rocks. However, there were more fundamental reasons for the cost generated from aslope treatment for grass and seed spray. So, it requires more detailed regulations on the modification factors for each soil type, the standard and needs to improve theillogical standard quantity per unit system. Actual construction rate of the 35 items in the applied sectors of civil engineering and architecture was 78.65% for each item and 71.31% (70.17%) as a total construction cost. This shows that actual unit cost cannot reflect actual cost structurally and standard quantity per unit system lacks practicality in terms of construction due to thelabor force. 85.1~91.2 % actual construction rate announced by the Ministry of Land and Maritime Affairs referred to the newly switched items. So the result was estimated as actual construction rate. This requires supplementation after verification in order to make the actual work cost produce at a proper rate. Also, standard quantity per unit system needs complementation with these actual data and so on.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1908-1918
• /
• 2013

Free-view, auto-stereoscopic video service is a next generation broadcasting system which offers a three-dimensional video, images of the various point are needed. This paper proposes a method that parallelizes the algorithm for arbitrary intermediate view-point image fast generation and make it faster using General Propose Graphic Processing Unit(GPGPU) with help of the Compute Unified Device Architecture(CUDA). It uses a parallelized stereo-matching method between the leftmost and the rightmost depth images to obtain disparity information and It use data calculated disparity increment per depth value. The disparity increment is used to find the location in the intermediate view-point image for each depth in the given images. Then, It is eliminate to disocclusions complement each other and remaining holes are filled image using hole-filling method and to get the final intermediate view-point image. The proposed method was implemented and applied to several test sequences. The results revealed that the quality of the generated intermediate view-point image corresponds to 30.47dB of PSNR in average and it takes about 38 frames per second to generate a Full HD intermediate view-point image.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.409-420
• /
• 2016

The aim of this study was to develop and validate an instrument to measure the separation anxiety of mothers who use child care facilities. The scale was developed as follows: initial items generated, validity and reliability tests performed, and final items extracted. The initial items were developed through a literature review and interviews. The content validity was verified by five experts. Using a final questionnaire, the data was collected from 204 mothers who used child care facilities with a convenient sampling method. The construct validity was evaluated by item analysis, exploratory factor analysis and confirmatory factor analysis. The results of confirmatory and exploratory factor analyses showed that the separation anxiety consisted of 6 factors: the mother's guilty feelings (5-items), safety of child care facilities (5-items), trust of teachers (5-items), child's anxiety (4-items), interaction anxiety with the child (4-items), and management of child care facilities (3-items). The separation anxiety scale for mothers using child care facilities consisted of 26 items. The reliability of the developed scale was examined. The Cronbach's ${\alpha}$ coefficient was 0.93. These results show that this scale is a valid and reliable instrument for measuring the separation anxiety level of mothers who use child care facilities.

• Journal of Energy Engineering
• /
• v.25 no.2
• /
• pp.37-44
• /
• 2016

The demand for electricity has a considerable impact on various energy sectors since electricity is generated from various energy sources. This paper attempts to estimate the electricity demand function and obtain some quantitative information on price and income elasticities of the demand. To this end, we apply a lagged dependent variable model to derive long-run as well as short-run elasticities using the time-series data over the period 1991-2014. Our dependent variable is annual electricity demand. The independent variables include constant term, real price of electricity, and real gross domestic product. The results show that the short-run price and income elasticities of the electricity demand are estimated to be -0.142 and 0.866, respectively. They are statistically significant at the 5% level. That is, the electricity demand is in-elastic with respect to price and income changes in the short-run. The long-run price and income elasticities of the electricity demand are calculated to be -0.210 and 1.287, respectively, which are also statistically meaningful at the 5% level. The electricity demand is still in-elastic with regard to price change in the long-run. However, the electricity demand is elastic regarding income change in the long-run. Therefore, this indicates that the effect of demand-side management policy through price-control is restrictive in both the short- and long-run. The growth in electricity demand following income growth is expected to be more remarkable in the long-run than in the short-run.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.337-349
• /
• 2006

Seven hundred and fifty one fractures of the rhyolitic tuffaceous rock masses were mapped using 6 scanlines placed on rock slope exposures that were within 8.02 km of Busan-Ulsan highway. These data were analyzed to find the number of fracture sets that exist in the rock slopes and the probability distributions of orientation, spacing, trace length and fracture size in 3-D for each of the fracture sets. All the fracture set orientation distributions exhibit high variability. The Fisher distributions were found to be unsuitable to represent the statistical distribution of orientation for most of the fracture sets. The probability distributions, gamma, exponential and lognormal were found to be highly suitable to represent the distribution of spacing and semi-trace length of fracture sets. In obtain-ing these distributions, corrections were applied for sampling biases associated with spacing and trace length. The generated fracture system in 3-D was used to make predictions of fracture traces for each fracture set on 2-D win-dows. Developed stochastic 3-D fracture network for the rock mass was validated by comparing statistical proper-ties of the observed fracture traces on scanlines with the predicted fracture traces on the scanlines. This exercise fumed out to be successful.