• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.432-438
• /
• 2002

In order to design and analyze the performance of an axial-flow pump it is necessary to know the flow deviation, deflection angle and pressure loss coefficient as a function of the angle of incidence for the hydrofoil section in use. Because such functions are unique to the particular section, however, general correlation formulae are not available for the multitude of hydrofoil profiles, and such functions must be generated by either experiment or numerical simulation for the given or selected hydrofoil section. The purpose of present study is to generate design correlations for hydrofoils with double circular arc (DCA) camber by numerical analysis using a commercial code, FLUENT. The cascade configuration is determined by a combination of the inlet blade angle, blade thickness, camber angle, and cascade solidity, and a total of 90 cascade configurations are analyzed in this study. The inlet Reynolds number based on the chord and the inlet absolute velocity is fixed at 5${\times}$10$\^$5/. Design correlations are formulated, based on the data at the incidence angle of minimum total pressure loss. The correlations obtained in this way show good agreement with the experiment data collected at NASA with DCA hydrofoils.

• Water for future
• /
• v.15 no.2
• /
• pp.33-39
• /
• 1982

For the determination of a reservoir capacity Rippl's mass-curve method has long been used with the past river flow data assuming the same flow records will be repeated in the future. In this study the synthetic generation methods of thomas-Fiering type and harmonic analysis were used to synthetically generate 50 years of monthly river inflows to three single-purpose reservoris(Chuncheon, Chungpyong, Hwacheon) and three multi-purpose reservoirs(Soyany, Andon, Daichung). The generated sequences of monthly flows were analyzed based on the range concept, and hence the so-determined ranges for single-prupose and multi-purpose rewervoirs were correlated with the number of monthly flow subseries, resulting an empirical equation of the Feller's type. (1) Single-purpose reservoir $$R_n=2.8357 I\sqrt{n}$$ (2) Multi-purpose reservoir $$R_n=2.5145 I\sqrt{n}$$ where, $R_n$:Range(㎥/S-M) n:periodic(12 months, ……120 months) I:Input mean(㎥/S-M) In Korea, the monthly inflow data generation will be fit to the Thomas-Fiering type, and this paper shows that the periodic range is easily calculated without the Rippl's mass-curve method as shown above formula.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.178-182
• /
• 2012

PEAT(Procedure/airspace Efficiency Assessment Tool) evaluates the efficiency of the flight procedures designed by Procedure and Airspace Design Program, such as fuel consumption fight time, flyability, noise footprint and etc. For noise footprint analysis among the efficiency metrics, the input generation module for INM(Integrated Noise Model) was designed in this research. The INM input files shall contain the information about aircraft types, noise model, airport and runway configuration, number of flights, flight routes, and also should be satisfied with the exact file formats for input data, since INM is not originally executable with file inputs. Therefore, it has been designed to convert the input data given in XML file to DBF. In this paper, the design result of the module which has functionalities to generate appropriate input file for INM, and to convert and save the analysis results from INM, is presented.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.1-12
• /
• 2005

The XML is emerging as standard language for data exchange on the Web. Therefore a demand of XML Schema(W3C MLL Schema Spec.) that verifies XML document becomes increasing. However, XML Schema has a weak point for design because of its complication despiteof various data and abundant expressiveness. This paper shows a simple way of design for XML Schema using a fundamental means for database design, the Entity-Relationship model. The conversion from the Entity-Relationship model to XML Schema can not be directly on account of discordance between the two models. So we present some algorithms to generate XML Schema from the Entity-Relationship model. The algorithms produce XML Schema codes using a hierarchical view representation. An important objective of this automatic generation is to preserve XML Schema's characteristics such as reusability, global and local ability, ability of expansion and various type changes.

• Journal of KIISE:Databases
• /
• v.32 no.5
• /
• pp.498-508
• /
• 2005

A shape data is used one oi most important feature for image retrieval as data to reflect meaning of image. Especially, structural feature of shape is widely studied because it represents primitive properties of shape and relation information between basic units well. However, most structural features of shape have the problem that it is not able to guarantee an efficient search time because the features are expressed as graph or tree. In order to solve this problem, we generate curvature-based morphological graph, End design key to cluster shapes from this graph. Proposed this graph have contour features and morphological features of a shape. Shape retrieval is accomplished by stages. We reduce a search space through clustering, and determine total similarity value through pattern matching of external curvature. Various experiments show that our approach reduces computational complexity and retrieval cost.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.205-214
• /
• 2014

Purpose: Phytosanitary irradiation treatment can effectively control regulated pests while maintaining produce quality. The objective of this study was to establish the best irradiation treatment for mangosteen, a popular tropical fruit, using a Monte Carlo simulation. Methods: Magnetic resonance image (MRI) data were used to generate a 3-D geometry to simulate dose distributions in a mangosteen using a radiation transport code (MCNP5). Microsoft Excel with visual basic application (VBA) was used to divide the image data into seed, flesh, and rind. Radiation energies used for the simulation were 10 MeV (high-energy) and 1.35 MeV (low-energy) for the electron beam, 5 MeV for X-rays, and 1.25 MeV for gamma rays from Co-60. Results: At 5 MeV X-rays and 1.25 MeV gamma rays, all areas (seeds, flesh, and rind) were irradiated ranging from 0.3 ~ 0.7 kGy. The average doses decreased as the number of fruit increased. For a 10 MeV electron beam, the dose distribution was biased: the dose for the rind where the electrons entered was $0.45{\pm}0.03$ kGy and the other side was $0.24 {\pm}0.10$ kGy. Use of an electron kinetic energy absorber improved the dose distribution in mangosteens. For the 1.35 MeV electron beam, the dose was shown only in the rind on the irradiated side; no significant dose was found in the flesh or seeds. One rotation of the fruit while in front of the beam improved the dose distribution around the entire rind. Conclusion: These results are invaluable for determining the ideal irradiation conditions for phytosanitary irradiation treatment of tropical fruit.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_3
• /
• pp.1027-1036
• /
• 2020

In this study, a cloud-based processing method using Agisoft Metashape, a commercial software, and Amazon web service, a cloud computing service, is introduced and evaluated to quickly generate high-precision 3D realistic data from large volume UAV images acquired in disaster sites. Compared with on-premises method using a local computer and cloud services provided by Agisoft and Pix4D, the processes of aerial triangulation, 3D point cloud and DSM generation, mesh and texture generation, ortho-mosaic image production recorded similar time duration. The cloud method required uploading and downloading time for large volume data, but it showed a clear advantage that in situ processing was practically possible. In both the on-premises and cloud methods, there is a difference in processing time depending on the performance of the CPU and GPU, but notso much asin a performance benchmark. However, it wasfound that a laptop computer equipped with a low-performance GPU takes too much time to apply to in situ processing.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.37-52
• /
• 2006

XML architecture is important to wireless or wired presentation. It is also important for data exchange between businesses. XML forces the separation of content from style and gives wired or wireless devices flexibility for interpretation. Separation of content, style, and logic is key to advanced architecture. XML can be exchanged among databases on multiple systems with presentation on wired or wireless devices. An XML schema might need to be defined, or an established DTD might need to be transformed to access a relational database on the server. The purpose of this study is to generate XML documents such as DTD, XML schema, RDB mapping using Tagfree's XML developer tools in order to experience whole processes mentioned above. Overall understanding of data structures of and database processing with XML documents, which is essential to XML programming and database processing, can be accomplished with this study without much endeavor to learn complex XML syntax. The future study can be extended on the subject of web programming with DOM or SAX API.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.4
• /
• pp.359-365
• /
• 2006

Recently generated natural disaster of rainfall is transformed into nationwide generate form from a specific region of generated form that damages are steadily growing. such natural disaster lead to much influence such as socioeconomic, financial, physical and casualties etc, therefore model collection can be a step required establishment of systematically management foundation and offer of systematic solved plan. this study proposed to analyze and arrange pattern of disaster and systems designed plan and establishment further scientific, prompt service of disaster. with GIS technique for decision-making offer the necessary preliminary data. also, each city have orthophoto and digital elevation model that analyze real topography and situation. with establish management system in order to carry out appropriate service of disaster management and establish realistic management system. system had established that OpenGL make three dimensional illustrate scale image data and digital elevation model therefore a module of section analysis developed way to illustrate and to analyze topography and longitudinal section in screen.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.415-425
• /
• 2007

In this study, we generated an orthophoto with both LIDAR data and aerial images and compared it with that generated from only the images. For the accuracy assessment of these orthophotos, we performed not only qualitative analysis based on visual inspection but also quantitative analysis by measuring horizontal inconsistency, boundary coordinates and similarity measures on buildings. Based on the visual inspection and horizontal inconsistency, the orthophoto based on LIDAR DSM appeared to be more closer to a true-orthophoto. However, the analysis on measurements of boundary coordinates and similarity measures indicates that the orthophoto based on LIDAR DSM is more vulnerable to double mapping on occluded areas. Accordingly, if we apply an effective solution on double mapping or use only the central areas of the aerial images where occluded areas are rarely founded, we can generate automatically true-orthophotos based on a LIDAR DSM.