• 한국화재소방학회논문지
• /
• 제23권1호
• /
• pp.40-47
• /
• 2009

현재 철골부재의 내화성능 확보를 위해서 다양한 내화피복방법이 적용되고 있으며, 따라서 이중 하나가 내화도료 피복 시스템의 적용이다. 하지만 내화도료 시스템의 경우 시공후 시간경과에 따라 균열, 탈락 등에 의한 내구성 저하 및 이에 따른 내화성능 상실의 우려가 있으며, 이에 따라 건축 설계 및 시공 초기에 시간경과에 따른 내구성 변화를 파악하여 이에 대비할 수 있는 평가방법 및 유지관리 등에 대한고려가 필요하다. 이에 본 연구에서는 시간경과에 따른 내화도료의 내구성 평가 및 이에 대한 관리방안을 제시하기 위하여 영국을 비롯한 기타 국가의 관련 자료를 조사하여 국내에 적용할 수 있는 내화도료 내구성 평가방법 및 유지관리에 필요한 기초 자료를 제시하도록 하였다.

• 대한토목학회논문집
• /
• 제39권3호
• /
• pp.441-449
• /
• 2019

최근 국내에서 경주지진(2016.09)과 포항지진(2017.11) 등 규모 5.0 이상의 지진이 발생하여 구조물의 내진안전성에 대한 관심이 증가하고 있다. 특히, 인명피해나 재산손실을 유발하는 생활시설물은 더욱 중요성이 강조되고 있다. 생활시설물 중 가스와 유류 등의 저장시설물이 있으며 물을 저장하는 탱크가 대표적이다. 본 연구에서는 액체저장탱크의 내진성능향상을 위해 면진의 일종인 납고무받침(Lead Rubber Bearing)을 적용하고자 한다. 액체저장탱크의 기초를 고려하여 납고무받침을 설계하였으며, 실험체를 제작하여 압축 및 전단특성실험을 통해 납고무받침의 일반적 물성을 확인하였다. 납고무받침에 대한 내구성 실험 이후 진동대 실험 및 ANSYS를 이용한 유한요소해석을 통해 비면진 및 면진 적용에 따른 액체저장탱크의 거동을 분석하였다.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.92-98
• /
• 2008

This paper describes the experiments of the corrosion and the sliding tests of the nickel-based alloys for the gate valve seating materials used at high pressure and temperature. The general corrosion rates and IGC susceptibility are tested in pressurized water at 533 K and 575 K and in Strauss test solution. The sliding tests have been done in pressurized water at 293 k, 473 K and 573 k. The alloys containing above 10% chromium may have the anti-corrosion properties that could be applied to the valve seats for the power plants. The good sliding performance and the good pressure tightness are obtained when the disc specimens that have hardness 500 to 600 Hv combined with the seat specimens that have hardness 250 to 410 Hv containing about 40 percent of iron. The large size gate valves sliding tests have certified the test results. The anti-wear properties of the seat alloy and the anti-IGC susceptibility of the disc alloy could be improved by the addition of silicon and niobium, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.608-613
• /
• 1998

Damping characteristics of ER dampers and flow rates inside ER valve with two different valve types were analyzed and compared with test results. Fluid flow inside ER valves was modeled by Bingham plastic model and Hagen-Poiseulli flow, while the equations of motion of total ER damper system were modeled by flow and hydraulic force balance. A general straight valve case was compared with a bended valve case which is newly tested for a possible improvement of ER damping force. As expected, the bended ER valve generates higher damping force and lower flow rates than the conventional straight ER valve due to additional flow restriction at the bended section. Analytical models of ER valve and ER damper generally predict reasonable performance characteristics of tested results. Therefore, developed analysis can be used for designing new ER dampers and simulation of ER semi-active suspension system as well.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.218-224
• /
• 2013

This paper describes the design and control of a hovering AUV test-bed and analyzes the dynamic performance of the vehicle using simulation programs. The main purpose of this vehicle is to carry out fundamental tests of its station keeping, attitude control, and desired position tracking. Its configuration is similar to the general appearance of an ROV for underwater operations, and its dimensions are $0.75m{\times}0.5m{\times}0.5m$. It has four 450-W thrusters for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring the water depth and a magnetic compass for measuring its heading angle. The navigation of the vehicle is controlled by an onboard Pentium III-class computer, which runs with the help of the Windows XP operating system. This provides an appropriate environment for developing the various algorithms needed for developing and advancing a hovering AUV.

• Child Health Nursing Research
• /
• 제4권2호
• /
• pp.286-293
• /
• 1998

The purpose of this study was to investigate the level of anxiety for the mothers of leukemic children and to provide the fundamental data for the better performance of caring to them. The subjects were 292 mothers : 100 mothers whose children had a leukemia, 80 mothers whose children had taken a tonsillectomy, 112 mothers whose children with medical disease except cancer. The data were collected through The State-Trait Anxiety Inventory of Spilberger and analyzed by t-test, ANOVA Scheffe test. The results were as follows ; 1. The state anxiety mean score of mothers with leukemic children was 54.16. 2. The state anxiety of mothers with leukemic children was higher than that of the rest (F=8.00, P=0.0004). 3. There was no significant difference in anxiety of mothers with leukemic children in relation to leukemic children's and their mother's general characteristics.

• 태양에너지
• /
• 제18권2호
• /
• pp.105-113
• /
• 1998

일반적으로 열 다이오드(thermo-diode)란 임의의 한 방향으로만 열 전달이 가능하도록 설계된 열 전달 기구이나, 열 흐름이 원하는 방향으로 이루어지는 양방향 열 다이오드를 사용한다면 겨울철 난방과 여름철 냉방부하 감소에 모두 효과적으로 적용될 수 있다. 본 연구에서는 루프형 양방향 열 다이오드를 응용한 태양열 이용 시스템을 설계 제작하였으며, test cell을 이용한 옥외 실험을 수행하여 실용 가능성을 확인하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.248-251
• /
• 2014

As more vehicles become equipped with advanced electronic control systems, more consideration is needed with regards to automotive safety issues related to the effects of electromagnetic waves. Unwanted electromagnetic waves from the antenna, electricity and other electronic devices cause the performance and safety problem of automotive components. In general, Power Integrity and Signal Integrity analysis have been widely used, but these analyses have stayed PCB level. PCB base analysis is different from radiated emission TEST condition so its results are used just for reference. This paper proposes EMC optimization technology using module level 3-dimensional radiation simulation process closed to fundamental test conditions. If module level EMC analysis, which is proposed in this study, is applied to all automotive electronics systems, unexpected EMC noise will be prevented.

• 한국경영과학회지
• /
• 제17권1호
• /
• pp.85-106
• /
• 1992

Much attention currently is being aimed to OA (office automation). OA has a potential for improving management decision making as well as increasing productivity of secretarial and clerical workers. This study construct a model that may be useful to the OA manager, in channeling OA efforts in the right direction. The purpose of this study is to analyze the improtance of critical success strategy for OA implementation, to test 5 hypotheses and 11 subsidiary hypothese of organizational characteristics and OA propulsion characteristics, and to suggest and evaluate a cussess strategy for OA implementation. The population consists of the Korean business in Seoul, 292 response of the 1000 questionaires were available and analyzed. The analytical methods are adopted on the frequency analysis to analyze the general characteristics, the one-way ANOVA, the Pearson's correlation analysis, the regression analysis for the test of the hypotheses.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.337-340
• /
• 2009

In general, channel information of received DTV signal analyzed based on symbol timing clock with only In-phase information in DTV receiver. This paper presents technical requirements of channel analysis system for DTV reception signal. In order to meet such requirements and measure more accurate magnitude and phase of channel information, compensation method for the quadrature information from measured in-phase data is proposed. The proposed channel analysis system is implemented with a commercial DTV chipset and provides fast data analysis with good connectivity with field test vehicles. Computer simulation and laboratory test results are provided to figure out the performance of the proposed channel analysis system for DTV signal.