• 한국해양공학회지
• /
• 제33권2호
• /
• pp.146-152
• /
• 2019

A design system was developed for the doubler plate of a ship structure simultaneously subjected to in-plane loads and lateral pressure based on general dimensions and those of a representative ship structure. An equivalent design equation that considers various structural design parameters was derived by introducing the equivalent plate thickness theory, and the design of the doubler plate reinforcement of the ship structure was developed. A hybrid structural design system was established for a doubler plate simultaneously subjected to in-plane loads and lateral pressure consisting of two modules: an optimized design module and a double plate strength & design review module. The practical application of this design system was illustrated to show its usability. It was found that the design safety of the doubler plate was ensured, and this system could be used as an initial design guide to review the double plate reinforcement for a dent or corrosion of the ship plate members. Using the developed design system would make it possible to obtain a more reasonable doubler plate structure that considers the rational reinforcement of plate members of ship structures. In addition, a more reliable structural analysis using a strength evaluation process can be performed to verify the efficiency of the optimum structural design for the doubler plate structure.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.15-21
• /
• 2006

Recently, the attention to large container ships whose size is greater than 10,000 TEU container ship has been increased due to their increasing demand. The large container ship has twin skegs because of the engine capacity and large beam-draft ratio. In this paper, the maneuvering characteristics of a container ship with twin skegs were investigated through 4DOF(four degree of freedom) HPMM(Horizontal Planar Motion Mechanism) test and computer simulation. A mathematical model for maneuvering motion with 4DOF of twin skegs system was established to include effects of roll motion on the maneuvering motion. And to obtain roll-coupling hydrodynamic coefficients of a container ship, 4DOF HPMM system of MOERI which has a roll moment measurement system was used. HPMM tests were carried out for a 12,000 TEU class container ship with twin skegs at scantling load condition. Using the hydrodynamic coefficients obtained, simulations were made to predict the maneuvering motion. Rudder forces of twin-rudders were measured at the angles of drift and rudder. The neutral rudder angles with drift angles of ship was quite different with those of single skeg ship. So other treatment of flow straightening coefficient $\gamma_R$ was used and the simulation results was compared with general simulation result. The treatment of experimental result at static drift and rudder test was very important to predict the maneuverability of a container ship with twin skegs.

• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.107-113
• /
• 2014

The icebreaking research vessel, ARAON had her second ice trial in the Arctic Sea from 16th July to 12th August 2010. During the voyage, the local ice loads acting on the bow of port side were measured from 14 strain gauges. The measurements were also carried out in ice waters with various ice concentration ratio as well as the icebreaking performance tests. In this study, the ice loads measured during the 'general' operation in ice waters were analyzed. As a first step, the relationship between the location of strain gauges and the ice loads were investigated, and then the possibility for observation of higher ice loads was estimated based on the probability density function. The relationship between the ship speed and the ice load was also investigated. 718 peak stresses data higher than 20 MPa obtained from strain gauges array attached in longitudinally and vertically was analyzed. In general, the ice load increases as the ship speed increases in the low ship speed range, and ice load decreases as the ship speed is greater than a certain speed.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.25-35
• /
• 2015

This study presents the analysis of relationship between ship speed and local ice load on the Korean Icebreaker ARAON. The relationship curves were made from the data obtained at two areas: the Arctic and the Antarctic; and for two operation condition: the icebreaking condition in sea ice trial and general operation in ice covered sea. The strain data were converted to the equivalent stress value, and the influence of ship speed on the local ice load was analyzed and compared each other. These analysis results are useful in working on a statistically valid hull design approach.

• 대한조선학회지
• /
• 제17권3호
• /
• pp.1-4
• /
• 1980

It is well known that discrepancies between measured and predicted ship motions are significant in the range of low frequencies. In this paper, the vertical ship motions in regular longitudinal waves in a shallow water are briefly discussed. The investigation is focussed on the role of wave exciting forces and moments to the motion responses in these low frequencies. It is confirmed that diffraction forces are in general small in a shallow water as one may expect. Furthermore the wave exciting forces and moments on a displacement-type ship will be larger practicularly in low frequencies, when the contribution of the diffraction effect is neglected. As a result of this fact theoretically predicted responses for the pitch motion becomes closer to the experimental one. The discrepancies for the heave motion, however, are still apparent.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.250-253
• /
• 2011

The cruise industry is one of the world's fastest growing device industry which is structural construction coasts are expensive. Cruise out-fittings are thirty times compare with general large vessels. According to the characteristics of materials or equipments, most equipments are imported from europe. At present domestic shipbuilding industries and minor enterprises have a hard times therefore enhancing technology for the cruise industry could be infused vitality on the industries. If domestic small and midium industries have high technology for the cruise ship, domestic small and midium industries can have global competitiveness compare with european equipment suppliers which has small-scale and high technology. Therefore on this study, cruise ship's new equipment development and a study for the performance assessment and classification type approval certificate was carried out.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권3호
• /
• pp.96-104
• /
• 2018

The importance of data management for the efficient maintenance and operation of offshore structures is becoming increasingly important. This paper has discussed the data schema and business rules that standardize the data exchange between ship design, operation and maintenance. Technical documentation that meets the international standards of ShipDex and S1000D for exchanging the operation and management data in neutral or standard formats has been introduced into the life cycle management of ships. The schema of the data exchange is represented by XML (eXtensible Markup Language) and the lifecycle data is implemented by a structured document. Lifecycle data is represented as data modules defined by XML schema. Given the feasible data generation, an example of a technical document is introduced by a general XML authoring tool.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권2호
• /
• pp.120-130
• /
• 2016

In general, a series of ship steering motions is composed of a combination of translational motions and rotational motions of the ship. In particular, a series of rotational motions frequently occurs in narrow areas such as ports and canal zones. In this paper, a method was suggested for composing an integrated control algorithm based on the jog dial as a command instrument for rotational motion control. In order to realize the rotational motions, several algorithms were suggested for generating rotational commands, for selecting motion variables, for choosing reference input values for the motion variables, for computing required accelerations and thrusts, and for allocating thrusts to actuators. A simulation program was compiled to execute simulations for three rotational motions. Finally, the effectiveness of the suggested method was verified by analyzing the simulation results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.176-180
• /
• 2006

When the vibration troubles occur on the ship structure during the sea trial, the rectification work is very restricted because of in-situ limitation. Usually, the finite element method is used to improve vibration characteristics of the structure, but it takes lots of time and effort in modeling the structure and adjusting the finite element model in order to consider appropriate boundary conditions of a complex ship structure. Therefore, experimental methods have been in general suggested to obtain proper countermeasures without time-consuming in modeling. In this paper, FRE(frequency response function) synthesis method is applied to estimate natural frequency of the modified ship structure, which is obtained from experimental and numerical methods.

• 대한조선학회지
• /
• 제24권4호
• /
• pp.71-83
• /
• 1987

There is at present a growing interest in the use of SWATH(Small Waterplane Area Twin Hull )ship for a variety of purposes due to their good seakeeping characteristics, small speed reduction in wave, and large deck area. Highly sophisticated design technology is requested to develop the SWATH ship. This paper describes the design technology for high speed coastal passenger SWATH ship which includes feasibility study, general arrangement and hull form design, resistance and propulsion test, motion test in regular waves, control fin design, and structural design.