• Journal of Korean society of Dental Hygiene
• /
• v.20 no.4
• /
• pp.435-445
• /
• 2020

Objectives: This study investigated the relationship between obesity and dental caries of Korean adolescents. Methods: Data from the Korea National Health and Nutrition Examination Survey (KNHNES VI) (2013 to 2015) were used and targeted adolescents aged 13 to 18 years. For statistical analysis, the SPSS 18.0 program was used, and the significance level was set at 0.05. Results: For the general and health-related characteristics, female students (p=0.001) showed higher decayed, missing, and filled teeth (DMFT) index than male students. Furthermore, DMFT showed higher tendency, as age was higher (p<0.001). Smoking (p=0.011) and drinking experience (p=0.027) revealed higher DMFT. The dental caries experience was significantly different among students who were female (p=0.033), older (p=0.001), and overweight or underweight (p=0.022). In the BMI for the general and health-related characteristics, male students had higher obesity rate than female students (p=0.003), and obese subjects had higher dental checkup in the last year (p=0.013). In multiple linear regression analysis of obesity and DMFT, the unadjusted model showed that the obesity group's DMFT was about 0.8 higher than that of the normal group (p=0.024). However, statistical significance was not shown in the adjusted models. In the logistic regression analysis of obesity and dental caries experience, the unadjusted model 1 (1.93 times), the adjusted model 2 (1.79 times), and model 3 (1.76 times) showed significantly higher dental caries experience. Conclusions: Both obesity and dental caries are related to diet habits and lifestyles and have a negative impact on adult health. Therefore, it is necessary to create a healthy social environment around the adolescent, and proper intervention through education is required to form healthy habits.

• Nutrition Research and Practice
• /
• v.11 no.4
• /
• pp.334-339
• /
• 2017

BACKGROUND/OBJECTIVES: Telomere length is a useful biomarker for determining general aging status. Some studies have reported an association between alcohol consumption and telomere length in a general population; however, it is unclear whether the alcohol flush reaction, which is an alcohol-related trait predominantly due to acetaldehyde dehydrogenase deficiency, is associated with telomere length. This cross-sectional study aimed to evaluate the associations of alcohol consumption and alcohol flush reaction with leukocyte telomere length (LTL). SUBJECTS/METHODS: The study included 1,803 Korean adults. Participants provided blood specimens for LTL measurement assay and reported their alcohol drinking status and the presence of an alcohol flush reaction via a questionnaire-based interview. Relative LTL was determined by using a quantitative polymerase chain reaction. Statistical analysis used multiple linear regression models stratified by sex and age groups, and potential confounding factors were considered. RESULTS: Age-specific analyses showed that heavy alcohol consumption (> 30 g/day) was strongly associated with a reduced LTL in participants aged ${\geq}65years$ (P < 0.001) but not in younger participants. Similarly, the alcohol flush reaction was associated with a reduced LTL only in older participants who consumed > 15 g/day of alcohol (P < 0.01). No significant alcohol consumption or alcohol flush reaction associations with LTL were observed in the sex-specific analyses. CONCLUSIONS: The results suggest that older alcohol drinkers, particularly those with the alcohol flush reaction, may have an accelerated aging process.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.127-146
• /
• 2022

Recently, as word embedding has shown excellent performance in various tasks of deep learning-based natural language processing, researches on the advancement and application of word, sentence, and document embedding are being actively conducted. Among them, cross-language transfer, which enables semantic exchange between different languages, is growing simultaneously with the development of embedding models. Academia's interests in vector alignment are growing with the expectation that it can be applied to various embedding-based analysis. In particular, vector alignment is expected to be applied to mapping between specialized domains and generalized domains. In other words, it is expected that it will be possible to map the vocabulary of specialized fields such as R&D, medicine, and law into the space of the pre-trained language model learned with huge volume of general-purpose documents, or provide a clue for mapping vocabulary between mutually different specialized fields. However, since linear-based vector alignment which has been mainly studied in academia basically assumes statistical linearity, it tends to simplify the vector space. This essentially assumes that different types of vector spaces are geometrically similar, which yields a limitation that it causes inevitable distortion in the alignment process. To overcome this limitation, we propose a deep learning-based vector alignment methodology that effectively learns the nonlinearity of data. The proposed methodology consists of sequential learning of a skip-connected autoencoder and a regression model to align the specialized word embedding expressed in each space to the general embedding space. Finally, through the inference of the two trained models, the specialized vocabulary can be aligned in the general space. To verify the performance of the proposed methodology, an experiment was performed on a total of 77,578 documents in the field of 'health care' among national R&D tasks performed from 2011 to 2020. As a result, it was confirmed that the proposed methodology showed superior performance in terms of cosine similarity compared to the existing linear vector alignment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.331-340
• /
• 2006

In this Paper, we propose to extend the TSS-LS(Two-Step Search scheme with Linear search based Second step) scheme which was already proposed by the authors for coherent UWB(Ultra Wide Band) systems, to rapid and reliable acquisition of noncoherent UWB systems in multipath channels. The proposed noncoherent TSS-LS employing simple energy window banks utilizes two different thresholds and search windows to achieve fast acquisition. Furthermore, the linear search is adopted for the second step in the proposed scheme to correctly find the starting point in the range of effective delay spread of the multipath channels, and to obtain reliable BER(Bit Error Rate) performance of the noncoherent UWB systems. Simulation results with multipath channel models by IEEE 802.15.3a show that the proposed two-step search scheme can achieve significant reduction of the required mean acquisition time as compared to general search schemes. ]n addition, the proposed scheme achieves quite good BER performance for large signal-to-noise ratios, which is favorably comparable to the case of ideal perfect timing.

• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.123-127
• /
• 1978

The major objective of this research is to identify those hospital characteristics that best explain cost variation among hospitals and to formulate linear models that can predict hospital costs. Specific emphasis is placed on hospital output, that is, the identification of diagnosis related patient groups (DRGs) which are medically meaningful and demonstrate similar patterns of hospital resource consumption. A casemix index is developed based on the DRGs identified. Considering the common problems encountered in previous hospital cost research, the following study requirements are estab-lished for fulfilling the objectives of this research: 1. Selection of hospitals that exercise similar medical and fiscal practices. 2. Identification of an appropriate data collection mechanism in which demographic and medical characteristics of individual patients as well as accurate and comparable cost information can be derived. 3. Development of a patient classification system in which all the patients treated in hospitals are able to be split into mutually exclusive categories with consistent and stable patterns of resource consumption. 4. Development of a cost finding mechanism through which patient groups' costs can be made comparable across hospitals. A data set of Medicare patients prepared by the Social Security Administration was selected for the study analysis. The data set contained 27,229 record abstracts of Medicare patients discharged from all but one short-term general hospital in Connecticut during the period from January 1, 1971, to December 31, 1972. Each record abstract contained demographic and diagnostic information, as well as charges for specific medical services received. The 'AUT-OGRP System' was used to generate 198 DRGs in which the entire range of Medicare patients were split into mutually exclusive categories, each of which shows a consistent and stable pattern of resource consumption. The 'Departmental Method' was used to generate cost information for the groups of Medicare patients that would be comparable across hospitals. To fulfill the study objectives, an extensive analysis was conducted in the following areas: 1. Analysis of DRGs: in which the level of resource use of each DRG was determined, the length of stay or death rate of each DRG in relation to resource use was characterized, and underlying patterns of the relationships among DRG costs were explained. 2. Exploration of resource use profiles of hospitals; in which the magnitude of differences in the resource uses or death rates incurred in the treatment of Medicare patients among the study hospitals was explored. 3. Casemix analysis; in which four types of casemix-related indices were generated, and the significance of these indices in the explanation of hospital costs was examined. 4. Formulation of linear models to predict hospital costs of Medicare patients; in which nine independent variables (i. e., casemix index, hospital size, complexity of service, teaching activity, location, casemix-adjusted death. rate index, occupancy rate, and casemix-adjusted length of stay index) were used for determining factors in hospital costs. Results from the study analysis indicated that: 1. The system of 198 DRGs for Medicare patient classification was demonstrated not only as a strong tool for determining the pattern of hospital resource utilization of Medicare patients, but also for categorizing patients by their severity of illness. 2. The wei틴fed mean total case cost (TOTC) of the study hospitals for Medicare patients during the study years was $11,27.02 with a standard deviation of $117.20. The hospital with the highest average TOTC ($1538.15) was 2.08 times more expensive than the hospital with the lowest average TOTC ($743.45). The weighted mean per diem total cost (DTOC) of the study hospitals for Medicare patients during the sutdy years was $107.98 with a standard deviation of $15.18. The hospital with the highest average DTOC ($147.23) was 1.87 times more expensive than the hospital with the lowest average DTOC ($78.49). 3. The linear models for each of the six types of hospital costs were formulated using the casemix index and the eight other hospital variables as the determinants. These models explained variance to the extent of 68.7 percent of total case cost (TOTC), 63.5 percent of room and board cost (RMC), 66.2 percent of total ancillary service cost (TANC), 66.3 percent of per diem total cost (DTOC), 56.9 percent of per diem room and board cost (DRMC), and 65.5 percent of per diem ancillary service cost (DTANC). The casemix index alone explained approximately one half of interhospital cost variation: 59.1 percent for TOTC and 44.3 percent for DTOC. Thsee results demonstrate that the casemix index is the most importand determinant of interhospital cost variation Future research and policy implications in regard to the results of this study is envisioned in the following three areas: 1. Utilization of casemix related indices in the Medicare data systems. 2. Refinement of data for hospital cost evaluation. 3. Development of a system for reimbursement and cost control in hospitals.

• Journal of Korea Water Resources Association
• /
• v.43 no.9
• /
• pp.823-833
• /
• 2010

Open-channel flows with submerged vegetation show two distinct flow structures in the vegetation and upper layers. That is, the flow in the vegetation layer is featured by relatively uniform mean velocity with suppressed turbulence from shear, while the flow in the upper layer is akin to that in the plain open-channel. Due to this dual characteristics, the flow has drawn many hydraulic engineers' attentions. This study compares layer-averaged models for flows with submerged vegetation. The models are, in general, classified into two-layer and three-layer models. The two-layer model divides the flow depth into vegetation and upper layers, while the three-layer model further divides the vegetation layer into inner and outer vegetation layers depending on the influence of the bottom roughness. This study compares the two-layer model and the three layer-model. It is found that the two-layer model predicts better the average value of the velocity and the prediction by the three-layer model is sensitive to Reynolds shear stress. In the three-layer model, the mean flow in the inner vegetation layer does not affect the flow seriously, which motivates the proposal of the modified two-layer model. The two-layer model, capable of predicting non-uniform mean velocity, is based on the Reynolds stress which is linear and of power form in the upper and vegetation layers, respectively. Application results reveal that the modified two-layer model predicts the mean velocity at an accuracy similar to the two- and three-layer models, but it predicts poorly in the case of very low vegetation density.

• The Journal of Fisheries Business Administration
• /
• v.46 no.2
• /
• pp.59-74
• /
• 2015

This study aims to estimate optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the offshore Stow Net and the offshore Gill Net fisheries using the current value Hamiltonian method and the surplus production model. As analyzing processes, firstly, this study uses the Gavaris general linear model to estimate standardized fishing efforts of yellow croaker caught by the above multiple fisheries. Secondly, this study applies the Clarke Yoshimoto Pooley(CY&P) model among the various exponential growth models to estimate intrinsic growth rate(r), environmental carrying capacity(K), and catchability coefficient(q) of yellow croaker which inhabits in offshore area of Korea. Thirdly, the study determines optimal harvesting production, fishing efforts, and stock levels of yellow croaker using the current value Hamiltonian method which is including average landing price of yellow croaker, average unit cost of fishing efforts, and social discount rate based on standard of the Korean Development Institute. Finally, this study tries sensitivity analysis to understand changes in optimal harvesting production, fishing efforts, and stock levels of yellow croaker caused by changes in economic and biological parameters. As results drawn by the current value Hamiltonian model, the optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the multiple fisheries were estimated as 19,173 ton, 101,644 horse power, and 146,144 ton respectively. In addition, as results of sensitivity analysis, firstly, if the social discount rate and the average landing price of yellow croaker continuously increase, the optimal harvesting production of yellow croaker increases at decreasing rate and then finally slightly decreases due to decreases in stock levels of yellow croaker. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts of the multiple fisheries decreases, but the optimal stock level of yellow croaker increases. The optimal harvest starts climbing and then continuously decreases due to increases in the average unit cost. Thirdly, when the intrinsic growth rate of yellow croaker increases, the optimal harvest, fishing efforts, and stock level all continuously increase. In conclusion, this study suggests that the optimal harvesting production and fishing efforts were much less than actual harvesting production(35,279 ton) and estimated standardized fishing efforts(175,512 horse power) in 2013. This result implies that yellow croaker has been overfished due to excessive fishing efforts. Efficient management and conservative policy on stock of yellow croaker need to be urgently implemented.

• Environmental and Resource Economics Review
• /
• v.29 no.3
• /
• pp.363-388
• /
• 2020

The purposes of this study are to not only estimate optimal harvests and efforts using the surplus production methods for Spanish mackerel caught by multiple fishing gears, but provide dynamic optimal fisheries management for these gears using the current value Hamiltonian method. To achieve the above purposes this study uses several models such as Gavaris's general linear model for standardizing fishing efforts, surplus production method for estimating biological and technological coefficients, current value Hamiltonian method for estimating dynamic optimal harvest and efforts, and sensitivity analysis for diagnosing economic influences of these fisheries. As a result, this study showed that Spanish mackerel was overfished by multiple fishing gears based on surplus production method and the current value Hamiltonian method. Also, this study found that when the price and cost proportionally changed, the optimal harvest and fishing effort sensitively responded to the stock level of Spanish mackerel. Next, this study suggested that the multiple fishing gears for Spanish mackerel should reduce unnecessary costs such as operating time or inefficient fuel consumption. Finally, this study provided reasons Spanish mackerel should be included in the TAC system in a view of profit maximization based on sustainable use of the Spanish mackerel.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.3
• /
• pp.331-342
• /
• 2017

Objectives: This study aimed at helping oral health prevention of the blind and related management plan, which is defined as the influence factors between missing and filled permanent teeth index and general feature and oral health behavior of the blind in Korea (estimates 229,678 persons) using data of the 6th Korea National Health and Nutrition Examination Survey from 2014 Korea Centers For Disease Control and Prevention. Methods: The blind over the age of 30 were selected as study subjects who have conducted health survey and dental inspections in KNHANES VI-2. Estimates of the subjects were 229,67 persons. For analyzing data, general linear models: GLM and covariance analysis were conducted to identify the relation between general feature and oral health behavior and missing and filled permanent teeth index. SPSS 21 statistical program was used, which is possible to conduct complex sampling design, and the significance level was 0.05. Results: The missing and filled permanent teeth index was 8.58 points. Regarding the results of the analysis, R-squared of the missing and filled permanent teeth index depending on general features of the blind was 0.839 points, which shows gender, age, residence, education level, individual income, disability rating, kinds of health insurance, marital status and recipient of basic living had an effect on the missing and filled permanent teeth index. R2 of the missing and filled permanent teeth index depending on oral health form of the blind was 0.728 points, which shows oral examination, dental treatment, smoking and toothbrushing after lunch had an effect on the missing and filled permanent teeth index. Conclusions: With the result of this study, we found the oral health actual condition of the blind in Korea. Therefore, it is considered that the government needs to introduce the personalized oral health education program to maintain oral health of the blind and to develop a program that uses braille and voice device which enables to access and utilize to improve oral health behavior that the government could use it as a reference to establish the policy plan.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.18-23
• /
• 2007

Purpose: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. Methods: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. Results: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. Conclusion: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.