• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.628-632
• /
• 2001

Experimental approach was investigated to improve gear rattle noise of a small car. During the development of a small car serious problem occurred inside the transmission gear units. The transmission was a carried over system from a less powered predecessor. Several components of suspicion were investigated, and applied to reduce rattle noise. In general, backlash, the assembly gaps, and the clutch disk rattle induce gear rattle noise. Above mentioned improvements were applied to reduce the noise, but still problem remained. Meanwhile, the temperature inside the gearbox was reported to be unusually high and the life of transmission oil quality deteriorated drastically, Temperature increment caused the large gap between the bearing outer diameter and the transmission housing. Large gap made the gear shaft assembly move intermittently and impact each other. The tighter control of the assembly gap allowed the rotating shafts smoothly and reduced the gear rattle noise even in the high temperature range.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.22-23
• /
• 2011

As device dimensions shrink, it is increasingly important to develop fabrication methods that can create sub-15 nm features of regular or arbitrary geometry in a rapid, parallel, and efficient process. This talk will discuss approaches based on self-assembling hybrid polymers containing Si. The thin films of those materials systems can generate well-ordered periodic arrays of dots or lines. For achieving, long-range ordering, it is helpful to use lithographically-defined templates, which are in general much larger than the length-scale of self-assembled nanostructures. For example, the self-assembly of polymer nanostructures can easily be templated using an array of nanoscale topographical elements that act as guiding templates or surrogates for one of two microdomains. The solvent-vapor-induced tunability of pattern dimension and morphology will be discussed as well. Those material systems can excellently serve for high-precision self-assembly that can provide good resolution, reliability, and controllability and be considered as an option for a future nanomanufacturing technology.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.23-33
• /
• 2018

In the general manual feeder of an LED lighting assembly system, many workers are needed to supply parts to the main conveyor. The automatic feeder for modern automation lighting assembly systems consists of a completely automated feeding system and a magazine system that supplies the parts automatically. A standardized LED panel and diffusion cover is stacked in the cartridge of the magazine system. The structural safety of the automatic feeding system with regard to handling the load from the panels and covers stored in the cartridge should be guaranteed. LED convergency lighting modules are assembled using two LED panels and one diffusion cover in an automatic feeder. In this study, the structural safety and fatigue life of the automatic feeder and magazine were analyzed by considering the load generated in the automatically assembled LED convergency lighting system. In addition, the dynamic behavior of each auto-feeding system and magazine delivery system was visualized, and the working process was evaluated via dynamic simulation using a virtual engineering method. A tack time table for automatic feeding systems was derived by developing a virtual prototype.

• Korean Journal of Animal Reproduction
• /
• v.24 no.2
• /
• pp.143-154
• /
• 2000

Most eggs initiated the fertilization processes but arrested at specific stages. The stages included failure of the oocyte to exit from the meiotic metaphase-II with or without sperm penetration, failure of appropriate sperm aster formation, inability to form proper male and female pronuclei, failure of suitable pronuclear apposition, and failure to form proper number of either male or female pronuclei. Various images of defective microtubule organization and chromatin configuration during IVF and ICSI procedures were observed. We discussed the data with previous research results during normal fertilization in humans and other mammals. In conclusion, various aberrant patterns in microtubule assembly and chromatin configuration, which were assessed in the present study, could be used as criteria to improve assisted reproductive technology in clinics. However, further cellular and molecular characterization is needed to clarify these aberrant patterns of cytoskeletal assembly.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.28-33
• /
• 1996

A transport theory code CRX-Hex based on characteristic methods with a general geometric tracking routine is developed for the heterogeneous hexagonal geometry. With the general geometric tracking routine, the formulation of the characteristic method is not changed. To test the code, it was applied to two benchmark problems which consist of complex meshes and compared with other codes (HELIOS, TWOHEX).

• Korean Journal of Legislative Studies
• /
• v.26 no.3
• /
• pp.5-35
• /
• 2020

This article purposes to investigate opening process of the 21st National Assembly in the middle of severe conflicts between two major-parties, and predict the changes it will bring to the operation of the National Assembly. With incumbent party's taking all leadership positions of standing committees, it broke the practice since 13th National Assembly, that is, distribution of the standing committees based on the seat-ratio. It means that our National Assembly has entered a new phase in the decision-making process. While the incumbent party, with overwhelming victory in general election, emphasizes that it should dominate legislative process to support the government, the out-party claims that they should take leverage to check over government. Two opposing trends are characteristically observed in the operation of the Korean National Assembly. First of all, due to the experience under authoritarian regimes, the National Assembly has been institutionalizing decision-making processes in the direction of enforcing cooperation between parties. On the other hand, the polarization in political parties has been stronger, making it difficult to reach consensus between parties. This article claims strongly that the 21st National Assembly need to find a balance amid such two-conflicting trends. To do so, three necessary conditions are proposed: observing decision-making procedures, securing diversity within party and National Assembly, and deliberative legislative activities.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.63-63
• /
• 2003

There are many actuators and sensors used for attitude control system for KOMPSAT such as Reaction Wheel Assembly, Magnetic Torque Assembly, Dual Thruster Module, Solar array Drive, Three Axis Magnetometer, Conical Earth Sensor, Fine Sun Sensor Assembly, Coarse Sun Sensor Assembly, Gyro Reference Assembly and so on. For KOMPSA T satellite it has been considered using the Magnetic Torquer (MTQ) generating the magnetic dipole moment. In general, the magnetic dipole moment for satellite attitude control system is used for dumping out the excessive reaction wheel momentum so that the reaction wheel speed is not saturated. The objective of this study is to analyze the magnetic field characteristics generated by the Magnetic Torquer using the Maxwell 2D Field Simulator software. Currently, the developing model (DM) of the MTQ is being developed and manufactured at a company under the supervision of KARL MTQ is an electromagnet consisting of a ferromagnetic cylindrical core on which an excitation coil is wound. A current is passed through the coil to produce a dipole momentum in the ferromagnetic core. The configuration of the MTQ will be introduced in the presentation. The 2 dimensional model of the MTQ is drawn as axisymmetric models in RZ plane, and each corresponding material is assigned to the each MTQ object, the core, coil, and background. After the boundary conditions, current sources, and solution parameters are set up, the magnetic field intensities, directions, and other values specified by users can be calculated by using the finite element analysis. The theoretical magnetic field quantities obtained by the Maxwell 2D Simulator can be used for the basis of the development of the MTQ.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1813-1821
• /
• 2024

Beam shaping assembly (BSA) is a vital component in Boron Neutron Capture Therapy (BNCT) for obtaining epithermal neutron beams. Several feasible designs of BSA for accelerator-based BNCT (AB-BNCT) neutron source are carried out based on neutrons by bombarding a natural lithium target with 10 mA, 2.8 MeV proton beams. The calculation results demonstrate that a thickness of 45 cm is appropriate for general moderators referring to the therapeutic parameter of Advanced Depth (AD). A series of optimizations are performed and two results are confirmed: One is that employing the configuration of MgF₂ and FLUENTAL combined by 1:1 could improve the therapeutic rate (TR) of tumors at a depth of middle region, and the other one is that the TR of superficial tumors can be increased by adding a 5 cm thick boron-11 secondary moderator at the end of general moderators. As a result, an innovative conception of an adjustable moderator is recommended to BNCT. Compared to the MgF₂ moderator with a fixed thickness of 45 cm, the TR value can be improved by a maximum of 47.7 % by using the adjustable moderator. Furthermore, the configuration of adjustable moderator has been designed with regulation method for treating tumors of different depths.

• The Korean Journal of Archival Studies
• /
• no.35
• /
• pp.93-132
• /
• 2013

It is principle that the National Assembly Minutes are open to the general public based on the Constitution of the Republic of Korea. However, it will not be released to the public when the minutes are produced at a meeting held privately -the closed minutes- and the parts of the minutes are not published because of 'the demands on keeping confidential of the Chairman of the National Assembly or needs for the National Security' based on the National Assembly Act article 118 clause 1. These two minutes infringe the democratic rights, the public's rights to know seriously by reason that there are no procedures to disclose to the public. Especially the non-published parts of the minutes are highly likely in breach of the constitution. This paper will deal with the regulations and guidelines related to the disclosure of the closed minutes focusing on the United States and the United Kingdom where developing countries on the parliamentary democracy. Then, it is suggested placing an emphasis on the legal aspects that the plans to make public of the closed minutes and non published parts of the minutes based on the reviewed results of the committee of the National Assembly Archives and the initiative proposed by the member of the National Assembly, Jung Chang-rae in the last 2004.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2313-2320
• /
• 2011

The management of a panel block shop in a shipyard is a complex process that entails the largest amount of work and in which many decisions are involved. Shipbuilders have considered the process as a bottleneck since every panel for every ship and offshore hull structure must be processed through the shop. In order to maximize process productivity, simulation-based ship production execution system(SPEXS) is proposed for panel block operations utilising discrete-event simulation and simulated annealing. An application of panel block assembly shop, called SPEX-Panel supports production planners by general dispatching rules and metaheuristics to make better scheduling decisions on the shop floor. In addition, the system will help increase productivity in the yard with continuous improvement.