• 건축사
• /
• 통권639호
• /
• pp.146-151
• /
• 2022

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1377-1383
• /
• 2005

A general and efficient methodology has been developed to analyze dimensional variations of an assembly, taking into account of weld distortion. Weld distortion is generally probabilistic because of the random nature of welding parameters such as the welding speed, maximum welding temperature, ambient temperature, etc. The methodology is illustrated through a very simple example of two perpendicular plates fillet-welded to each other. Two steps comprise the methodology: establishment of a weld-distortion database, and tolerance analysis using the database. To establish the database, thermo-elasto-plastic finite element analyses are conducted to compute the weld distortion for all combinations of discrete values of major welding parameters. In the second step of tolerance analysis, the weld distortion retrieved from the database is used in addition to the dimensional tolerances of the parts. As a result of such an analysis, sensitivities of the assembly's dimensional variations to the part tolerances and weld distortion are obtained, which can be help improve the dimensional quality of the assembly.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.251-255
• /
• 2015

Thermal deformation, such as bending and twisting, occurs among the polymer parts of air-conditioner indoor units because of repetitive temperature change during heating operation. In this study, a numerical method employing finite-element analysis to efficiently simulate the thermal deformation of an assembly is proposed. Firstly, the displacement of an actual assembly produced by thermal deformation was measured using a 3D optical measurement system. The measurement results indicated a general downward sag of the assembly, and the maximum displacement value was approximately 1 mm. The temperature distribution was measured using a thermographic camera, and the results were used as initial-temperature boundary conditions to perform temperature-displacement analysis. The simulation results agreed well with the measured data. To reduce the thermal deformation, the stiffness increased 100%. As the results, the maximum displacement decreased by approximately 5.4% and the twisting deformation of the holder improved significantly.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.228-237
• /
• 1996

On the basis of a brief introduction of the mechanized dry farming in Heilongjiang Province, the author states the developing process from the combination of single technics of farm machinery and agronomy to the technical assembly of high yield cultivation technics and its mathematical expression. According to the main temperature accumulated zones, 5 typical comprehensive technical assembly models for the mechanized cultivation technics and their agricultural machinery systems have been listed. They are, the Heihe " 261" wheat and soybean model : the Yi'an big ridge double row film mulching corn model : the Yongchang high yield mechanized soybean and other grain crops six year rotation model for Keshan state farms. The author conclude that the application of mechanized high yield cultivation technical assembly is the key point to transform the Heilongjiang province from big agriculture to strong agriculture, we have to take " high yield , high quality , high efficiency , s stain -ability and earning foreign currency" as the general target and carry out the corresponding policy and measures for the further development of agricuture.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.517-521
• /
• 2016

General industrial robots are difficult to use for precision assembly because they are operated based on position control. Their position accuracy is also usually higher than the assembly clearance (several tens of ${\mu}m$). In previous researches, force control was suggested as a robotic assembly solution. However, this method is difficult to apply in reality because of speed and cost problems. The RCC provides high speed, but applications are limited because the compliance is fixed, and it cannot detect an assembly condition during a task. A variable passive compliance device (VPCD) was developed herein. The VPCD can detect the assembly condition during tasks. This device can provide proper compliance for successful assembly tasks. The pneumatic system and the Stewart platform with an LVDT sensor were applied for measuring the displacement and variable compliance, respectively. The concept design and analysis were conducted to prove the effectiveness of the developed VPCD.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.45-51
• /
• 2014

Thermal shock tests at two stress levels were performed to see the life (cycles) of LPF ASSY (low pass filter assembly) at normal stress level. In this case Coffin-Manson relationship is generally used to describe the relationship between the temperature difference and the life, together with the Weibull distribution describing the life at each stress level. So for given data Coffin-Manson is fitted to predict the life at normal stress level. However, different types of models are appropriate for this type of test. Hence, a more appropriate model such as General log-linear model which can also incorporate the duration at the highest and lowest temperatures and acceleration time will be introduced.

• 화약ㆍ발파
• /
• 제14권2호
• /
• pp.28-31
• /
• 1996

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.155-156
• /
• 2023

In the case of steel door frames commonly found in general buildings, there are various assembly methods such as rivets, bolts, and welding, but the welding method is generally used. However, this welding joint method has many problems, such as distortion due to heat and damage due to external shock. In particular, when used as a fire door, problems may occur in the event of a fire due to distortion caused by heat from welding and the weak welded joint area. In the case of rivet or welded joints, when moved after assembly, joint loosening due to external shock may occur. Problems may arise where the bonding strength becomes weak. In addition, with the recent increase in high-rise buildings and larger buildings, when assembly is completed and brought to the site, a place is needed to store it, and in addition, there is a problem in that it has to be transported several times in small quantities to the installation site, which is another problem of time and cost loss. This is coming to the fore. In order to fundamentally solve this problem, we have researched and developed a non-welding door frame that can be assembled on site. We have researched and developed three assembly methods: screw-type, insert-type, and protrusion-type. Non-welded door frames are small in size and easy to package, making them advantageous for domestic and overseas exports.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.11-21
• /
• 2004

Objectives: The aim of this study is to determine prevalence and related factors of musculoskeletal symptoms in electronics assembly line workers. Method: A questionnaire survey was performed on 350 workers in In-chon city. The questionnaire consisted of questions on the general characteristics, work duration, working hours, hobby activity hours, housekeeping activity hours and standardized descriptions of NOISH on musculoskeletal symptoms. Result: Complaint rates of musculoskeletal symptoms by anatomical site were as follows: shoulder, 67% : neck, 40.4% : waist, 28.7% : wrist and hand, 27.1% : foot and leg, 14.4% : arm and elbow, 11.2%. Significantly higher prevalence of shoulder musculoskeletal symptom was found women than men, married than unmarried, less than 1hours housekeeping activity than over 1hours housekeeping activity. Multiple logistic regression analysis identified gender, marital status and housekeeping activity as the main affecting factors for shoulder musculoskeletal symptoms. Conclusions: The most prevalence of musculoskeletal symptoms was shoulder site. It was higher in married women and over 1hours housekeeping activity in a day. It is recommended that married women should be reduce housekeeping activity time.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.417-431
• /
• 1997

To resolve a general argument about OBE elimination for the future nuclear power plant design, seismic responses of reactor vessel internals and fuel assembly for Ulchin nuclear power plant units 3 and 4 in Korea are investigated as an example. Dynamic analyses of the coupled internals and core are performed for the seismic excitations using the reactor vessel motions. By investigating the response relations between OBE and SSE and their response characteristics, the critical components for OBE loading are addressed. Also the fuel assembly responses are calculated using the core plate motions and their behavior is found to be insignificant for OBE elimination.