We developed a processing recipe to synthesize flexible polyurethane foam with a pore size of 335 ± 107 ㎛. The gelling reaction time was varied from 0 to 30 minutes and the physical properties of the foam were evaluated. The gelling reaction where the polypropylene glycol and tolylene 2,4-diisocyanate (TDI) were reacted to form urethane prepolymer, proceeded until a chemical blowing agent, deionized water, was introduced. Fourier transform infrared (FT-IR) spectra showed that the composition of the foam did not change but the foam height reached a peak value when the gelling reaction time was 10 minutes. We found that increasing the gelling time lessened the coalescence and helped the formation of cells. Lastly, the repeatability of polyurethane foam was confirmed by one-way analysis of variance (ANOVA) by synthesizing ten identical polyurethane foams under the same experimental conditions, including the gelling reaction time. Overall, the new time parameter in-between the gelling and blowing reactions will give extra stability in manufacturing identical polyurethane foams and can be applied to various polyurethane foam processes.
For the purpose of developing a new process f3r the elimination of oil components from oily waste water, experimental researches using oil gelling agent were performed. The process is composed of three units, that is, decantator, gelling column and adsorption column. 10g of gelling agent in the gelling column could effectively absorb 15.65g of oil from ship washing waste water and 16.93g of oil from steel industry waste water. COD in waste waters dramatically diminished not in the gelling column but in the adsorption column. The .gelling is hindered by other organic components in waste water, and the optimum space time f3r the gelling column Is 20min. 1g of gelling agent absorbed 3.7-4.0g of oil from waste waters with 25 min in the batch operation.
Pitchstone(Volcanic ejecta) reacts with CaO in hot water and increases its sedimentary volume by forming Ca(OH)2 and calcium silicate hydrates. ALC was prepared from the various gelling and curing conditions using the ratio of pitchstone/CaO was 2(CaO/SiO2 mol ratio=0.81), and then the products, crystalline phases and physical properties of ALC with experimental conditions was investigated. The crystalline phase of tobermorite with laths and plate type and the porosity were increased, the thermal conductivity was decreased with increasing gelling temperature and time. But modulus of rupture has maximum value when gelling time was 2 hrs. Othwrwise the bulk density nearly unchanged with increasing curing temperature, but the modulus of rupture was increased.
Chemical compositions, trypsin inhibitory activity, and gelling properties of albumen from duck egg during salting of 30 days were studied. As the salting time increased, moisture content decreased, the salt content and surface hydrophobicity increased (p<0.05). Trypsin inhibitory activity and specific activity were continuously decreased throughout the salting time of 30 days (p<0.05). This coincided with the decrease in band intensity of inhibitor with molecular weight of 44 kDa as examined by inhibitory activity staining. Nevertheless, no differences in protein patterns were observed in albumen during the salting of 30 days. Based on texture profile analysis, hardness, springiness, gumminess, chewiness, and resilience of albumen gel decreased with increasing salting time. Conversely, salted albumen gels exhibited higher cohesiveness and adhesiveness, compared to those of fresh albumen. Scanning electron microscopic study revealed that gel of salted albumen showed the larger voids and less compactness. In general, salting lowered trypsin inhibitory activity and gelling property of albumen from duck egg to some extent. Nevertheless, the salted albumen with the remaining inhibitor could be an alternative additive for surimi or other meat products to prevent proteolysis.
The sustained release dosage form which delivers melatonin (MT) in a circadian fashion over 8 h is of clinical value for those who have disordered circadian rhythms because of its short halflife. The purpose of this study was to evaluate the gelling properties and release characteristics of alginate beads varying multivalent cationic species $(Al^{+++}, \; Ba^{++}, \; Ca^{++}, \; Mg^{++}, \; Fe^{+++}, \; Zn^{++})$. The surface morphologies of Ca- and Ba-alginate beads were also studied using scanning electron microscope (SEM). MT, an indole amide pineal hormone was used as a model drug. The $Ca^{++}, \; Ba^{++}, \; Zn^{++}, \; Al^{++}\; and\; Fe^{+++}\; ions\; except\; Mg^{++}$ induced gelling of sodium alginate. The strength of multivalent cationic alginate beads was as follows: $Al^{+++}\llFe^{+++} the induced hydrogel beads were very fragile and less spherical. Fe-alginate beads were also fragile but stronger compared to Al-alginate beads. Ba-alginate beads had a similar gelling strength but was less spherical when compared to Ca-alginate beads. Zn-alginate beads were weaker than Ca- and Ba-alginate beads. Very crude and rough crystals of Ba- and Ca-alginate beads at higher magnifications were observed. However, the type and shape of rough crystals of Ba- and Ca-alginate beads were quite different. No significant differences in release profiles from MT-loaded multivalent cationic alginate beads were observed in the gastric fluid. Most drugs were continuously released upto 80% for 5 h, mainly governed by the passive diffusion without swelling and disintegrating the alginate beads. In the intestinal fluid, there was a significant difference iq the release profiles of MT-loaded multivalent cationic alginate beads. The release rate of Ca-alginate beads was faster when compared to other multivalent cationic alginate beads and was completed for 3 h. Ba-alginate beads had a very long lag time (7 h) and then rapidly released thereafter. MT was continuously released from Feand Zn-alginate beads with initial burstout release. It is assumed that the different release rofiles of multivalent cationic alginate beads resulted from forces of swelling and disintegration of alginate beads in addition to passive diffusion, depending on types of multivalent ions, gelling strength and drug solubility. It was estimated that 0.2M $CaCl_2$ concentration was optimal in terms of trapping efficiency of MT and gelling strength of Ca-alginate beads. In the gastric fluid, Ca-alginate beads gelled at 0.2 M $CaCl_2$ concentration had higher bead strength, resulting in the most retarded release when compared to other concentrations. In the intestinal fluid, the decreased release of Ca-alginate beads prepared at 0.2 M $CaCl_2$ concentration was also observed. However, release profiles of Ca-alginate beads were quite similar regardless of $CaCl_2$ concentration. Either too low or high $CaCl_2$ concentrations may not be useful for gelling and curing of alginate beads. Optimal $CaCl_2$ concentrations must be decided in terms of trapping efficiency and release and profiles of drug followed by curing time and gelling strength of alginate beads.
알스트로메리아는 경제적으로 중요한 절화 작물 중 하나이다. 그러나 낮은 증식률과 번식기간이 길고 바이러스 질병 감염이 높기 때문에 대량증식이 어렵다고 알려져 있다. 따라서 기내 조직배양을 이용한 대량증식 시스템 쳬계 확립이 필요하다. 본 연구에서는 BA와 NAA 그리고 여러 가지 배지 고형제를 이용하여 알스트로메리아 최적의 생장 효율을 찾기 위하여 실험을 진행하였다. 먼저 BA 1.0 mg/L 와 NAA 0.1 mg/L를 첨가한 배지에서 무처리구에 비하여 신초 및 뿌리의 개수가 약 1.5배 증가하였고 비대한 신초와 뿌리를 나타내었다. 여러 가지 배지 고형제들 중 gelrite 0.25%를 첨가한 배지에서 타 처리구에 비해 최대 50% 향상된 길이를 나타내었고, 근경 개수 및 생체중 증가량에 있어서도 가장 높은 효율을 나타내었다. 본 연구결과를 토대로 알스트로메리아 신품종 개발 및 대량증식 시스템 체계 확립에 도움을 줄 것으로 기대된다.
밀도(密度)가 다른 동일시료토(同-試料土)에 시멘트계(系), 물유리계(系) 및 아크릴아미드계(系) 등의 약액(藥液)을 침투주입(浸透注入)시켜 고결토(固結土)에 대한 토질성상변화(土賢性狀變化)를 구명(究明)한 것이다. 더욱, 매우 잘 다져진 지반(地盤) 그리고 유수중(流水中)에서의 주입효과(注入効果)를 검토(檢討)하기 위하여 1액(液) 1계류식(系流式)과 2액(液) 1계류식(系流式)의 특수주입장치(特殊注入裝置)를 설계제작(設計製作)하여 침투주입(浸透注入)을 시도(試圖)하였다. 고결토(固結土)의 전단강도(剪斷强度) 및 차수효과(遮水効果)의 증대(增大)는 주로 점착력(粘着力)에 의한 것으로서 느슨한 상태의 경우는 박막점착력(薄膜粘着力)에 의해서, 조밀한 경우는 구조성점착력(構造性粘着力)에 의해서 증대(增大)된다. 유수중(流水中)에서의 주입효과(注入効果)는 매우 저하(低下)하여 유속(流速) 및 gel time의 변화(變化)에 따라 45~80%의 유효고결률(有効固結率)이 얻어졌으며, 더욱 주입재(注入材)의 입도(粒度)는 침투성(浸透性) 및 이동거리(移動距離)에는 크게 영향(影響)을 미치나 유효고결률(有効固結率)에는 별다른 영향(影響)이 없다는 사실을 알 수 있었다. 관입저항분포도(貫入低抗分布圖)와 등강도곡선(等强度曲線)에 의해 다짐정도(程度)가 매우 큰 지반(地盤)에 대한 고결범위(固結範圍), 고결강도(固結强度) 및 약액침투상황(藥液浸透狀況) 등의 주입효과(注入効果)를 합리적(合理的)으로 판정(判定)할 수 있었다.
본 연구에서는 아민계 젤화 촉매 dimethylcyclohexyl amine(DMCHA)과 칼륨계 젤화 촉매 potassium octoate(PO)가 경질 폴리우레탄 발포체의 반응거동에 미치는 영향에 대해 연구하였다. Polymeric 4,4'-diphenyl methane diisocyanate, 폴리에스터 폴리올, 실리콘 유화제, 발포제 그리고 젤화 촉매를 사용하여 경질 폴리우레탄 발포체를 제조하였다. DMCHA 촉매의 함량이 0에서 2.0 g으로 증가함에 따라 반응 시간이 약 330초에서 약 35초로 감소하였고, 발열 반응으로 최대 반응온도는 약 217에서 약 $234^{\circ}C$로 증가하였다. PO 촉매의 함량이 0에서 2.5 g으로 증가할수록 반응 시간은 약 79초에서 약 38초로 감소함을 보였고, 특히 젤 타임, 택 프리 타임의 단축에 기여하였으며, 최대 반응온도가 약 182에서 약 $271^{\circ}C$로 증가하였다. 단열 온도 상승법을 이용하여 전환율을 구하였고, 반응식의 상수들을 계산하였다. 반응속도상수 $k_0$는 DMCHA 촉매의 양이 증가할수록 큰 값을 갖는 것을 확인하였고, PO 촉매의 경우 촉매량 증가와 큰 관계없이 유사한 값을 나타냈다.
Polymeric 4,4'-diphenylmethane diisocyanate (PMDI), 여러 관능기와 OH 값을 가지는 7종의 폴리올, 실리콘 계면활성제, 두 종류의 촉매 그리고 세 종류의 발포제를 사용하여 폴리우레탄폼(PUF)을 제조하였다. 발포제로는 염화불화탄소(CFC-11), 염화불화탄화수소(HCFC-141b)와 불화탄화수소(HFC-365mfc)가 이용되었다. HCFC-141b를 사용한 PUF의 기초특성과 cell 구조에 대한 겔화촉매와 blowing 촉매의 영향을 조사하였다. Cell 크기는 촉매의 양에 따라 감소하였다. 겔화촉매의 경우에 밀도 변화는 거의 없지만 압축강도는 촉매양이 0에서 2 pph로 증가함에 따라 11.9에서 $12.66kg_f/cm^2$로 증가하였다. 3 종의 발포제를 이용한 PUF의 겔화시간, 밀도와 압축강도를 측정하였으며, 물리적 특성에 있어서는 큰 차이를 나타내지 않았다. 그러나 다른 두 종류의 발포계와 비교했을 때 HCFC-141b를 사용한 PUF의 cell 구조는 불균일함을 알 수 있었다.
Basic research on the formation of monolithic glasses from metal alkoxide has been done concerning gelling of silicon alkoxides and dehydration of those gells. The felling time were increased with increasing of Carbon number of alkyl radical of alkoxide and am-ount of water and the lower pH value of water. Large portions of water and organic materials were rem-oved below 25$0^{\circ}C$ and shrinkage of glass took place above 80$0^{\circ}C$ Therefore heating up to 25$0^{\circ}C$ and above 75$0^{\circ}C$ must be done gradually with rate of 0.5$^{\circ}C$/min.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.