• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.569-580
• /
• 2018

The possibility of applying poulticing was studied for removing Paraloid B72, a resin used for fixing an earthen mural painting. Five types of poultices were selected from clay and gel types, and acetone, ethanol, and methyl ethyl ketone(MEK) were used as mixed solvents. The possibility of mixing between the poultice and solvent was investigated, and then the spreadability, fluidity, acidity, drying properties, and solubility of the poultices were examined to confirm the characteristics. A poultice agent, which is suitable for applying to a mural painting, was selected and applied to a painting layer sample coated with Paraloid B72. As a result, all painting layers were good condition at under 50% of the solvent. The removal efficiency of Paraloid B72 was more effective when most of the solvents were used at 50%, rather than at 25%. However, it is difficult to mix 50% of MEK and ethanol with the gel-type poultices. When used at 25%, the removal performance was poorer than that at 50%, but the mixing with all the poultices was successful. In addition, the adsorption and removal power of the gel-type poultice were better than those of the clay-type, but the latter was expected to be more suitable in short-time cases due to its high drying speed. The results of this study show that the dissolution performance varies depending on the poultices and solvents. Hence, the poultice and solvent should be selectively applied, considering the fixative of the mural to be removed.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.300-308
• /
• 2021

In this study, 3D networked poly(sodium acrylate) gel was polymerized and controlled with the crosslinking environment to evaluate the mechanical properties and swelling behavior. In general, as the degree of crosslinking in a pre-gelled solution increases, the swelling ratio of the 3D networked gel decrease while the mechanical strength of the gel increases. Interestingly, this study demonstrates that the polymerization and crosslinking efficiency in gelling process could be depended on the crosslinking environment by evaluating the number of elastically cross-links in 3D networked gel. As a result, the number of elastically corss-links would be changed with 3.6 times as varying of the crosslinking environment while keeping the degree of crosslinking. It is expected that the 3D networked gel would be optimized as an effective absorbing agent for VOCs by using the gel evaluation method based on the number of elastically cross-links.

• Food Science of Animal Resources
• /
• v.42 no.3
• /
• pp.536-555
• /
• 2022

The most abundant Orthoptera in Mexico is a small grasshopper (Sphenarium purpurascens) which is considered a food source with increased nutritional value due to its high protein content. Insect proteins have gained relevance because of their high potential as gelling, texturing, and extender agents in the food industry. The objective of this study was to evaluate the effect of substituting meat with a soluble protein extract from grasshopper obtained by alkalisation or alkalisation-piezoelectric ultrasound, on the techno-functional, physicochemical, and sensory characteristics of cooked meat models (sausages). The soluble protein was extracted in NaHCO₃ pH 8 and a piezoelectric ultrasound 5-mm sonotrode at 20 kHz with 99% amplitude. Different formulations with meat substitution: 0%, 5%, 10%, and 15% were prepared and characterised for their rheological behaviour, emulsion stability, weight loss by cooking, total protein content, colour, and texture. Sensory evaluation was conducted with consumers using a test involving check-all-that-apply and overall liking. The alkalisation-piezoelectric ultrasound method improved the solubility and the techno-functional properties of the soluble grasshopper protein when applied in sausages at maximum levels of 10% meat substitution. The sensory evaluation indicated that the formulation with 5% meat substitution exhibited the same acceptability as the control sample. Given these results, the soluble protein treated with alkalisation and piezoelectric ultrasound could be used as an extender in meat products.

• Food Science of Animal Resources
• /
• v.42 no.3
• /
• pp.372-388
• /
• 2022

Insects have long been consumed by humans as a supplemental protein source, and interest in entomophagy has rapidly increased in recent years as a potential sustainable resource in the face of environmental challenges and global food shortages. However, food neophobia inhibits the widespread consumption of edible insects, despite their high nutritional and functional value. The own characteristics of edible insect protein such as foaming properties, emulsifying properties, gelling properties and essential amino acid ratio can be improved by drying, defatting, and extraction. Although nutritional value of some protein-enriched bread, pasta, and meat products, especially essential amino acid components was increased, replacement of conventional food with edible insects as a novel food source has been hindered owing to the poor cross-linking properties of edible insect protein. This deterioration in physicochemical properties may further limit the applicability of edible insects as food. Therefore, strategies must be developed to improve the quality of edible insect enriched food with physical, chemical, and biological methods. It was presented that an overview of the recent advancements in these approaches and highlight the challenges and prospects for this field. Applying these strategies to develop insect food in a more familiar form can help to make insect-enriched foods more appealing to consumers, facilitating their widespread consumption as a sustainable and nutritious protein source.

• Geomechanics and Engineering
• /
• v.33 no.1
• /
• pp.29-40
• /
• 2023

Xanthan gum and starch compound biopolymer (XS), an environmentally friendly soil-binding material produced from natural resources, has been suggested as a slope protection material to enhance soil strength and erosion resistance. Insufficient wet strength and the consequent durability concerns remain, despite XS biopolymer-soil treatment showing high strength and erosion resistance in the dried state, even with a small dosage of soil mass. These concerns need to be solved to improve the field applicability and post-stability of this treatment. This study explored the utilization of an alkaline-based cation crosslinking method using calcium hydroxide and sodium hydroxide to induce non-thermal gelation, resulting in the enhancement of the wet strength and durability of biopolymer-treated soil. Laboratory experiments were conducted to assess the unconfined compressive strength and cyclic wetting-drying durability performance of the treated soil using a selected recipe based on a preliminary gel formation test. The results demonstrated that the uniformity of the gel structure and gelling time varied depending on the ratio of crosslinkers to biopolymer; consequently, the strength of the soil was affected. Subsequently, site soil treated with the recipe, which showed the best performance in indoor assessment, was implemented on the field slope at the bridge abutment via compaction and pressurized spraying methods to assess feasibility in field implementation. Moreover, the variation in surface soil hardness was monitored periodically for one year. Both slopes implemented by the two construction methods showed sufficient stability against detachment and scouring, with a higher soil hardness index than the natural slope for a year.

• Journal of Dairy Science and Biotechnology
• /
• v.16 no.2
• /
• pp.106-118
• /
• 1998

Whey is a natural product obtained during cheese production. With the advent of new technology, whey protein concentrates and whey fractions have become readily available and versatile food ingredients. Whey protein concentrates are highly functional ingredients that have gelling, emulsifying, whipping, water-binding and fat-replacement properties. New fractions derived from whey (such as alpha-lactalbumin, lactoferrin, lactoperoxidase and peptides) attract considerable interest worldwide because of their bioactive or health-enhancing properties. Some of these fractions also find new uses as natural antibiotic, natural preservative and immunity-enhancing agents. With the growth of the functional foods industry sector, an increasing number of manufacturers take advantage of whey's nutritional and functional benefits to develop successful new products. The United States is the world's largest single producer and exporter of whey products. In 1997, more than 1 million metric tons of whey products were manufacturers in the U.S.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.909-914
• /
• 1995

In order to investigate gelation properties of Gelation Properties of ${\alpha}-lactalbumin$(${\alpha}-La$), gelling times and protein solubilities of ${\alpha}-La$ gels prepared in 0.1 M Tris-HCI buffer(pH 8.0) followed by heating at $90^{\circ}C$ for 40 minutes under different ${\alpha}-La$ concentration, NaCl, $CaCl_2$, N-ethylmaleimide(NEM), and dithiothreitol(DTT) concentration were measured. Gelling times decreased with increasing concentration of ${\alpha}-La$, NaCl, $CaCl_2$, and DTT, but increased with increasing concentration of NEM. ${\alpha}-La$ solutions made from all treatments were gelled within 40 minutes with the exception of NEM at $20{\sim}50\;mM$. Solubilities decreased with increasing concentration of ${\alpha}-La$, NaCl, $CaCl_2$, and DTT, but the solubility of NEM-modified gels increased with increasing concentration of NEM. As the results, solubilities In standard buffer were $10.4{\sim}51.3%$, $9.2{\sim}35.4%$, $11.1{\sim}35.0%$, $8.0{\sim}9.5%$, and $96.8{\sim}56.2%$, respectively. Solubilities in standard buffer containing 8 M urea and 0.5% SDS were higher than those in standard buffer, and were $41.8{\sim}81.3%$, $41.9{\sim}64.1%$, $43.5{\sim}69.8%$, $29.6{\sim}38.5%$, and $77.4{\sim}98.9%$, respectively. Solubilities in the presence of DTT were almost close to 100% in all conditions. These results indicates that the gelation rate and solubility are influenced by many factors, i.e. protein concentration, kind and concentration of salts, concentration of thiol reagents. The solubility of gel decreased with increasing the gelation rate.

• Journal of the Korean Home Economics Association
• /
• v.43 no.9 s.211
• /
• pp.143-162
• /
• 2005

Many ethnic groups have different cultural backgrounds and each culture has developed with its own traditions. The interaction between different cultures is getting more active through acculturation and cultural contact. The purpose of this study was to provide basic data about the domestic living of Australians in order to compare with Korean immigrants in the form of a Cross-Cultural study. For this, usage of domestic space and seating style of 53 Australian households in Melbourne were analyzed. Ethnographic research with questionnaire was used. The results of the research were as follows. 1. The open plan type combining the kitchen, dining and tying areas was the most popular one for Australians and they are very satisfied with that type. 2. The laundry room has been planned traditionally and Australians demand to be able to dry their laundry and do ironing in there additionally. Most of Australians were satisfied with separated toilet and bathroom. h drain hole on the floor of the bathroom was not essential for most Australians. 3. Australians were doing various activities in the living areas and they also enjoy gelling together in the kitchen and dining areas. 4. The seating style of Australians was generally the chair-seating style. However, they sometimes made a bed for guests on the floor and watched TV and treated guests with both chair seating style and floor seating style. 5. Australians were satisfied with using carpet presumably for its warmth.6. Many Australians took off their shoes inside of the house for hygienic reason. Most people organized the shoes in the cabinet of the bedroom. 7. The most popular heating system was ducted heating for Australians and they were very satisfied with it because it was suitable for the weather in Melbourne. 8. The living room was the most important one for Australian families and they thought that it should be decorated well for entertaining guests. It was also considered that brightness of the light was enough for most Australians.

• Culinary science and hospitality research
• /
• v.15 no.4
• /
• pp.99-114
• /
• 2009

This study examined the optimal cooking condition for surimi-like material (SLM) derived from porcine semimembranosus (SM) muscle and the effects of the various cooking temperatures and the cooking time on the gel properties. The most noticeable change that occurred during the preparation of the SLM from the SM was the reduction in the fat content (about 1%) during the washing procedures. The hardness and gel strength value were increased significantly as the cooking temperature was increased by $75^{\circ}C$ for 20 min (p<0.05). The SLMG cooked above $75^{\circ}C$ had a significantly higher WHC than the SLMG cooked below $75^{\circ}C$ (p<0.05). The gelling property of SLMG was effected for different conditions of cooking time and temperatures by the result of SDS-PAGE. After 20 min cooking, some enzyme bands including phosphorylase disappeared. The loss of these bands (about 46 kDa and 60 kDa) was observed after 20 min of cooking time. The photographs of microscopy showed that the filaments of myofibrils did not disappear after a cooking time of 15 min, and that the gaps between the fibers or filament were close. A significant change in the fibers and filaments occurred from 30 min to 35 min of cooking time, and the gradual coagulation of the structure of the SLM was observed with cooking time increased. These results suggest that a desirable surimi gel could be obtained from pork by cooking at $75^{\circ}C$ for 25 min.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.1
• /
• pp.99-106
• /
• 1998

Two kinds of carrageenan were extracted from red seaweeds, Tichocarpus crinitus, collected in The Peter the Great Bay of Russia on August, 1996. One is KC1-insoluble carrageenan and another is KC1-soluble carrageenan. The yield of KC1-insoluble carrageenan was 17.15%, which is composed of 18.06% total sulfate, 5.61% protein, 3.51% K+, 0.49% Na+, 1.66% Ca2+, 54.26% galactose, 4.68% xylose, trace of mannose and glucose. The yield of KC1-soluble carrageenan was 3.52%, which is composed of 24.06% total sulfate, 5.2% protein, 5.32% K+, 0.16% Na+, 2.80% Ca2+, 33.54% galactose, 5.48% xylose, 4.32% mannose, trace of glucose. But rhamnose was not detected in both case. FT-IR spectrum showed that the KC1-insoluble carrageenan was kappa-type carrageenan and that KC1-soluble carrageenan was lambda, iota hybrid-type carrageenan. KC1-insoluble carrageenan was very weakly formation the gel compared with KC1-insoluble carrageenan from other red seaweeds. So we investigated viscosity. Both type carrageenan was stable in the temperature until 9$0^{\circ}C$, 1 hr. The viscosity of the solution of KC1-insoluble carrageenan was increased to about two folds by K+, but was not changed by Ca2+. The viscosity of the solution of KC1-soluble carrageenan was reduced by K+ and Ca2+. Both of them was stabilized in alkali but was reduced in comparison with acid conditions. In this study, both carrageenan was expected as thickening agent than gelling agent for food additives.