• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.83-91
• /
• 2014

In this study, we synthesized two different silica monoliths by using sol-gel, solvent exchange, surface modification, ambient pressure drying processes, and surfactant-based templating technique followed by calcination process. All of the prepared two silica monoliths showed crack-free appearance with fairly good transparency, and furthermore were confirmed to have extremely high porosity, specific surface area, and mean pore size below 30 nm. The silica aerogel sample exhibited finer and more homogeneous nano-sized pore structure due to spring back effect caused by surface modification, which resulted in better thermal insulation performance. Based on measured thermal conductivities and theoretical relationship, multi-layered glass window system in which silica monolith prepared in this study was inserted as a middle layer was revealed to have superior thermal insulation performance compared to conventional air-inserted glass window system.

• Journal of Ecology and Environment
• /
• v.41 no.9
• /
• pp.265-270
• /
• 2017

Background: Over the years, pine pollens have been excluded as an allergen due to its relatively large size, low protein content, and waxy hydrophobic layer, despite their abundance. However, recent studies suggest the possibilities of pine pollens being allergens, and it has been reported that allergy symptoms were highly prevalent in areas with considerably large pine forests and high possibility of exposure to the pollen. Therefore, we conducted a comparative analysis of the allergenicities of the pollens from the dominant species of Korean pines, red pine (Pinus densiflora), black pine (Pinus thunbergii), and pitch pine (Pinus rigida), in mice. Methods: The protein composition of the pollens from the three pine species was compared via sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The pine pollens and proteins extracted from the pollens were introduced to BALB/c mice by nasal inhalation and application to exposed skin and the IgE produced by the mice were extracted from blood and analyzed via ELISA. Results: SDS-PAGE showed differing protein compositions of the pollens of the three pine species. Analysis of blood IgE compositions showed a similar amount of IgE produced when pollens were applied to skin. In contrast, when mice inhaled the pollens, P. densiflora was shown to induce significantly more IgE production than those of the other two species. Conclusions: The experimental results demonstrate that the pollens of all three South Korean pine species induce IgE production, and this production was more pronounced when the pollens were inhaled than when they were applied to the skin. Of the three species, the pollen of P. densiflora was found to induce the highest level of IgE production.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.168-174
• /
• 2016

A conductive oxide-based sapphire glass indium tin oxide/metal electrode and the optical coating, through patterning process was studied in excellent optical properties and integrated touch panel has a high strength. Indium tin oxide conductive oxides of the sapphire glass to 0.3 A at DC magnetron sputtering method of 10 min, gas flow Ar 10 Sccm Ar, $O_2$ 1.0 Sccm the formation conditions of the thin film after annealing at $550^{\circ}C$ for 30min was achieved through a 86% transmittance. In addition, the coating 130 nm hollow silica sol-gel was to improve the optical transmittance of the indium tin oxide to 91%. For the measurement by the modeling hollow silica sol by Macleod simulation and calculated the average values of silica part to the presence or absence in analogy to actual. Refractive index value and the actual value of the material on the simulation the transmittance difference is it does not completely match the air region similar to the actual value (transmission) could be confirmed that the measurement is set to a value of between 5 nm and 10 nm.

• Archives of Pharmacal Research
• /
• v.27 no.2
• /
• pp.217-224
• /
• 2004

Previously, we reported that water-extracted Acanthopanax senticasus exhibited anti-meta-static activity by stimulating the immune system. In this study, we fractionated glycoproteins (EN-SP) from the soluble protein layer (GF-AS) of A. senticasus and determined their basic chemical properties. We also investigated the anti-tumor and immunostimulating activities of the fractionated glycoprotein, EN-SP. We found that intravenous (i.v.) administration of GF-AS dramatically inhibited metastasis of colon26-M3.1 carcinoma cells to the lung in a dose-dependent manner. In vitro analysis showed GF-AS to enhance the proliferation of splenocytes. GF-AS also stimulated peritoneal macrophage, which was followed by the production of various cytokines such as IL-1$\beta$, TNF-$\alpha$, IL-12 and IFN-${\gamma}$. Furthermore, the production of these cytokines was partially blocked when peritoneal macrophage was cultured with the polyclonal antibodies against GF-AS. The depletion of NK cells by rabbit anti-asialo GM1 serum partly abolished the inhibitory effect of GF-AS on lung metastasis of colon26-M3.1 cells. Using gel filtration, EN-SP, an active glycoprotein fraction, is isolated from GF-AS. While both GF-AS and EN-SP stimulated the proliferatation of splenocytes of normal mice, EN-SP showed higher anti-metastatic activity and more potently stimulated the proliferation of splenocytes compared to GF-AS. These results suggest the use of EN-SP, the fractionated glycoprotein from A. senticasus, can be used as a therapeutical reagent to prevent or inhibit tumor metastasis.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.96-104
• /
• 2010

We suggest here a cost-effective replica fabrication method for transparent and hard molds for imprinting lithography such as NIL and S-FIL. The process starts with the use of a replica hard mold from a master, using a polymer copy as a carrier. The polymer copy as a carrier was treated by soluble process for forming anti-adhesion layer. Duplicated hard molds can eliminate direct contact between a hard master and a patterned polymer on a substrate and the generated contamination of a master during the imprinting process. The replica hard mold exhibits the glass-like properties introduced here, such as transparency and hardness, make it appropriate for nanoimprint lithography and step-and-flash imprint lithography.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.5-13
• /
• 2012

This research have investigated the application and the injection effect of the alkaline silicasol grouting materia (which is) recently developed. To compare the engineering characteristics of the alkaline silicasol which is formed with 3D-gel and the sodium silicate, it have studied the strength and environmental effects through the laboratory test, and field application was investigated with a review of the injection effect and waterproof through the field test. As a result of the laboratory test, unconfined compression strength of alkaline silicasol was 5 times more than sodium silicate. As a result of the leaching test, a total amount of the eluviated elements was very small, it considered the environment-friendly material. As a result of the field test, considerable reduction of the coefficient of permeability at the hydraulic layer was confirmed, and it could secure that the coefficient of permeability showed a lower than standard value of $10^{-5}cm/sec$.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1113-1119
• /
• 2003

We used isopropanol which has low boiling point to prepare thin films at low temperature and changed mole concentration of zinc acetate from 0.3 to 1.3 mol/l. The structural, optical and electrical properties of ZnO thin films with Zn content were investigated. ZnO thin films highly oriented along the c-axis were obtained at Zn concentration of 0.7 mol/l. ZnO thin films with Zn concentration of 0.7 mol/l showed a homogeneous surface layer of nano structure. The transmittance of ZnO thin films by UV-vis. measurement was about 87% under the Zn concentration of 0.7 mol/l, but rapidly decreased over the 1.0 mol/l. The optical band gap energy was obtained from 3.07 to 3.22 eV which is very close to the band gap of bulk ZnO (3.2 eV). The electrical resistivity of ZnO thin films was about 150 $\Omega$-cm that shows little difference with Zn concentration. I-V curves of ZnO thin films exhibited typical ohmic contact properties.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.902-908
• /
• 2003

Au/TiO$_2$ core-shell structure nanoparticles were synthesised by sol-gel process, and the morphology and crystallinity of TiO$_2$ shell were investigated by TEM and UV-Vis. absorption spectrometer. Au/TiO$_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of TOAA (Titanium Oxide Acethylacetonate) in Au colloid ethanol solution with $H_2O$. The thickness of TiO$_2$ shell on the surface of Au particles was about 1 nm. To investigate the crystallinity of TiO$_2$ shell, UV light with 254 nm and radioactive lay of $^{60}$ CO were irradiated on the TiO$_2$ coated Au colloid ethanol solution. The surface plasmon phenomenon of Au nanoparticles appeared only when the radioactive lay was irradiated on the TiO$_2$ coated Au colloid ethanol solution. From these results, it was found that the TiO$_2$ shell was amorphous and the MUA (Mercaptoundecanoic Acid) layer on the Au particle for its dispersion didn't act as an obstacle to disturb the movement of electron onto the surface of Au particle.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.447-453
• /
• 2011

The monodisperse spherical $SiO_2$ particles were overcoated with $Y_2O_3:Eu^{3+}$ phosphor layers via a Pechini sol-gel process and the resulting $SiO_2@Y_2O_3:Eu^{3+}$ core-shell phosphors were subsequently annealed at $800^{\circ}C$ at an ambient atmosphere. The crystallographic structure, morphology, and luminescent property of core-shell structured $SiO_2@Y_2O_3:Eu^{3+}$ phosphors were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL). The spherical, nonagglomerated $SiO_2$ particles prepared by a Stober method exhibited a relatively narrow size distribution in the range of 260-300 nm. The thickness of phosphor shell layer in the core-shell particles can be facilely controlled by varying the coating number of $Y_2O_3:Eu^{3+}$ phosphors. The core-shell structured $SiO_2@Y_2O_3:Eu^{3+}$ phosphors showed a strong red emission, which was dominated by the $^5D_0-^7F_2$ transition (610 nm) of $Eu^{3+}$ ion under the ultraviolet excitation (263 nm). The PL emission properties of $SiO_2@Y_2O_3:Eu^{3+}$ phosphors were also compared with pure $Y_2O_3:Eu^{3+}$ nanophosphors.

• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.173-179
• /
• 2004

The $BaTiO_3$ powders and thin films were prepared by an alkoxide modified sol-gel process (polymerization-complex route) using ethylene glycol. The stable starting (Ba-Ti)-mixed metal organic sol was made by addition of acetylacetone. The $BaTiO_3$ powders, which had a particle size of 40~77 nm, were crystallized from an amorphous to a tetragonal phase on annealing at 700 and $1100^{\circ}C$ for 1 h. From FT-IR, solid-state $^{13}C$ CP/MAS NMR spectroscopy and X-ray diffractometry, the trace of the Ba-Ti-oxycarbonate phase first appeared at $400^{\circ}C$. Hydrolyzed sol was spin coated on a quartz wafer at 3500 rpm for 60 s and pyrolyzed at $1100^{\circ}C$ for 1 h. After heat treatment, the coated layer became dense and smooth.