• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.1943-1949
• /
• 2024

This study focuses on the comparative analysis of ABS polymer samples produced using two distinct manufacturing techniques: 3D printing and the sol-gel methods. In the first approach, ABS polymer was augmented with rare earth oxides, Er₂O₃ and Gd₂O₃, in nano powder form and fabricated into test specimens using 3D printing technology. In the second approach, identical samples were prepared via the sol-gel technique involving mold-based fabrication. Elemental content analysis revealed no significant differences between the samples produced by the two methods. The study proceeds to evaluate the gamma-ray shielding, neutron shielding, temperature resistance, and SEM/EDS pictures of ABS samples generated through both techniques. 3D printing method exhibited more favorable results in terms of structure morphology and thermal stability while there is no significant difference for radiation shielding. The results provide insights into the performance and suitability of each production method for radiation shielding applications. This research not only contributes to enhancing radiation shielding technology but also informs the selection of the most appropriate fabrication method for specific applications in nuclear technologies and diagnostic energy range in medical purposes.

• 대한화장품학회지
• /
• 제48권1호
• /
• pp.55-64
• /
• 2022

Cleansing foam이라 불리는 지방산 칼륨 cream soap은 crystal gel 구조로 이루어져 있어 유화계와는 달리 전단응력에 약하며 고온의 보관조건에서 쉽게 분리되는 특성을 보여준다. Crystal gel 구조는 지방산의 종류 및 비율, 중화도, polyol의 종류와 사용량에 따라 크게 영향을 받는다. Crystal gel 구조에 미치는 이들의 영향을 조사하기 위해 water/potassium hydroxide (KOH)/fatty acid ternary system에서 실험을 실시하였다. Differential scanning calorimeter (DSC) 측정 결과 myristic acid (MA) : stearic acid (SA) = 3 : 1 비율에서 공융점(eutectic point)를 갖고 이 혼합비가 가장 안전한 삼성분계(ternary system)를 만든다는 것을 발견했다. 점도 측정과 편광현미경 (POM) 관찰 결과 중화도는 75% 부근이 최적이라고 판단된다. 삼성분계의 melting point (T_m)이 보관온도보다 높을 때, 그리고 crystal phase가 lamellar gel phase로 상 전이가 일어날 때 안정하나 지방산 함량의 증가는 안정성에 거의 영향을 미치지 않는다. 삼성분계에 polyol의 첨가는 T_m을 변화시키고 상전이를 일으키는데 중요한 역할을 한다. 클렌징폼의 구조는 저온 주사전자현미경 (Cryo-SEM), 소각 및 광각 X-선 산란 (SAXS, WAXS) 분석으로 규명하였다. Butylene glycol (BG), propylene glycol (PG), dipropylene glycol (DPG)은 T_m을 낮추어주며 lamellar gel phase 형성을 어렵게 하는 반면 glycerin, PEG-400, sorbitol은 T_m을 상승시키고 lamellar gel phase 형성을 용이하게 하며 안정한 삼성분계를 만든다.

• 한국축산식품학회지
• /
• 제37권2호
• /
• pp.162-167
• /
• 2017

Functional and nutritional soluble proteins can be recovered from surimi (and surimi-like material) processing wastewater, reducing environmental problems and the cost of an irresponsible waste disposal. Recovered proteins may be added back at a low percentage to surimi products. The aim of this work was to evaluate the effect of the addition of soluble recovered proteins (RP), obtained from mechanically separated chicken meat surimi-like material (MSCM-SLM) processing wastewater by acidic pH-shifting, on the composition and texture of RP-MSCM-SLM, with RP contents of 0, 10, 20 and 30% (w/w) in the mixture. For that, proximate composition and gel properties were evaluated. The fat content of the MSCM-SLM was significantly reduced to 11.98% and protein increased to 83.64% (dry basis) after three washing cycles. The addition of 30% RP in the MSCM-SLM significantly augmented the protein content to 93.45% and reduced fat content from to 2.78%. On the other hand, the addition of RP was responsible for a drastic decrease in texture parameters, reaching 252.36 g, 185.23 g.cm, and 6.97 N for breaking force, gel strength and cutting strength, respectively, when 30% of RP was included in the MSCM-SLM. It was concluded that the obtained intermediary product (RP-MSCM-SLM) is a good option to applications in processed meat products where high texture parameters are dispensable, e.g., emulsified inlaid frankfurter-type sausages, but high protein content and low fat content desired.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.510-516
• /
• 2013

Fly ash is one of the aluminosilicate sources used for the synthesis of geopolymers. The particle size distribution of fly ash and the content of unburned carbon residue are known to affect the compressive strength of geopolymers. In this study, the effects of particle size and unburned carbon content of fly ash on the compressive strength of geopolymers have been studied over a compositional range in geopolymer gels. Unburned carbon was effectively separated in the $-46{\mu}m$ fraction using an air classifier and the fixed carbon content declined from 3.04 wt% to 0.06 wt%. The mean particle size ($d_{50}$) decreased from $22.17{\mu}m$ to $10.79{\mu}m$. Size separation of fly ash by air classification resulted in reduced particle size and carbon residue content with a collateral increase in reactivity with alkali activators. Geopolymers produced from carbon-free ash, which was separated by air classification, developed up to 50 % higher compressive strength compared to geopolymers synthesized from raw ash. It was presumed that porous carbon particles hinder geopolymerization by trapping vitreous spheres in the pores of carbon particles and allowing them to remain intact in spite of alkaline attack. The microstructure of the geopolymers did not vary considerably with compressive strength, but the highest connectivity of the geopolymer gel network was achieved when the Si/Al ratio of the geopolymer gel was 5.0.

• 한국식품과학회지
• /
• 제14권1호
• /
• pp.63-66
• /
• 1982

본 연구에서는 한국산 감귤류 폐과피의 효율적인 이용을 위하여 온주 밀감의 과피에서 펙틴을 추출하여 펙틴 함량을 측정하였으며, 추출한 펙틴과 펙틴 겔의 특성에 대해 검토하여 다음의 결과를 얻었다. 온주밀감의 과피와 albedo 내의 펙틴함량은 건물중량으로 각각 11.52%, 9.3%이었다. 과피에서 추출한 펙틴의 equivalent weight, 메톡실 함량, DE는 각각 596, 13.41%, 82.18%로 고메톡실 펙틴이었다. 아세틸함량은 0.125%로 겔 형성을 방해하는 범위는 아니었다. 점도와 분자량은 본 실험에 사용한 상품 펙틴에 비하여 높았으며, anhydrouronic acid함량은 98.4%로 매우 순도가 높았다. 추출한 펙틴의 젤리 등급은 138.1로 상품 펙틴에 비해 높아 우수한 겔 형성능력을 지닐 것으로 예측되었다. 겔의 텍스쳐는 강도, 응집성, 접착성 및 gumminess 모두 추출한 펙틴이 낮았다.

• 한국작물학회지
• /
• 제45권5호
• /
• pp.305-309
• /
• 2000

Ultra-drying [＜5.0% seed moisture content (SMC)] storage technique is a cost-effective storage method for oily seeds. To decide proper ultra-drying condition for soybean seeds, drying rate was compared three silica gel to seed ratios, two seed sizes with varietal difference, two kinds of container, and three seed amounts per container under :t 23$\pm$1$^{\circ}C$. When the relative humidity (RH) was reduced at the rate of less than 0.1 % a day, silica gel was replaced with dry one by 47 days. Higher silica gel to seed ratios (3:1 and 2:1) dried faster than lower ratio (1:1) until 28 days, but not after 43 days of drying. Also, large seeded variety was dried faster than small seeded variety. Kinds of container and seed amounts per container didn't show differences in drying of soybean seeds. After completion of ultra-drying, percentage germination by standard germination test (SGT) was not different among silica gel to seed ratios, kinds of container, and seed amounts per container, except among seed sizes (varieties). Before SGT, soybean seeds were premoistened using saturated ${CaCl}_2$ for 48 hours and ${NH}_4$Cl for 24 hours in desiccators. To compare germinability between ordinary-dried seeds and ultra-dried seeds, the seeds of seven soybean varieties, which were varying in size from 8.1 to 34.9 g per 100 seeds, were dried using same amount of silica gel under 23$\pm$1$^{\circ}C$. After completion of 76 days of drying, SMCs were reduced to 3.13-3.45% from 7.86-8.82%. SMC after completion of drying was not correlated with 100-seed weight (r=0.556). Before germination tests, soybean seeds were premoistened using saturated salt solutions. Percentage germination was higher with ultra-dried seeds than ordinary-dried seeds in SGT and higher with ordinary-dried seeds than ultra-dried seeds in AAT at the beginning of storage and after 6 months storage, but general trend of percentage germination was not observed among varieties classified by 100-seed weight. From these results, we concluded that further studies are needed to improve ultra-drying storage method for soybean seeds.

• Journal of Ginseng Research
• /
• 제14권2호
• /
• pp.112-116
• /
• 1990

As a part of studies on the quality control of crude drug preparation drinks, ginseng saponins were identified by HPLC. Ginsenoside-Rb1 was determined quantitatively by HPLC. Ginsenoside MeOH/H2O(65:35:10, v/v) on Si-gel plate. Ginsenoside-Rb1 content determined by HPLC on Lichrosorbtract drinks was 57.5-70.4% compared to the content in the red ginseng extract.

• Journal of Pharmaceutical Investigation
• /
• 제36권4호
• /
• pp.253-262
• /
• 2006

This study was performed to investigate the effects of treatment for dermatitis using the herbal gel preparations. Scutellariae Radix(SR) and Zingiberis Rhizoma(ZR) were used for the purpose of herbal preparations. Baicalin, baicalein are the ingredients of SR, having biological effects like anti-inflammatory, anti-oxidative, anti-bacterial and antiallergic action. 6-Gingerol is one of the ingredients of ZR having biologicai effects like anti-inflammatory and analgesic action. The three types of hydrogels(SRE, SRH, SZH) were formulated with Carbopol 940, Labrasol, Triethanolamine etc. Baicalin was hydrolysed to baicalein by $\beta$-glucuronidase for the purpose to increase rate of skin permeation. Content of ingredients by HPLC determination, rate of skin permeation using Franz type diffusion cell, anti-oxidative activity for the free radical, hydroxyl radical, superoxide, anti-inflammatory by using carrageenan injection, efficacy on the dermatitis induced by 2,4-dinitro-chlorobenzene(DNCB) were experimented. Baicalein showed higher permeability than baicalin, so it is considered that baicalein was more suitable form than baicalin for transdermal absorption by its lipophilic property. In the anti-oxidative experiments, SZH gel was the most effective scavenging activity than the other gels in all experiments. In anti-inflammatory test, SRM and SZH gel more decreased edma rapidly than SRE gel. In case of using SZH gel, treatment period for the dermatitis was more declined than that of other gel groups. These results suggests that the SZH hydrogel could be suitable preparations for the treatment of dermatitis.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.65-70
• /
• 2006

An amperometric glucose biosensor has been developed based on the use of the nanoporous composite film of sol-gel-derived zirconia and perfluorosulfonated ionomer, Nafion, for the encapsulation of glucose oxidase (GOx) on a platinized glassy carbon electrode. Zirconium isopropoxide (ZrOPr) was used as a sol-gel precursor for the preparation of zirconia/Nafion composite film and the performance of the resulting glucose biosensor was tuned by controlling the water content in the acid-catalyzed hydrolysis of sol-gel stock solution. The presence of Nafion polymer in the sol-gel-derived zirconia in the biosensor resulted in faster response time and higher sensitivity compared to those obtained at the pure zirconia- and pure Nafion-based biosensors. Because of the nanoporous nature of the composite film, the glucose biosensor based on the zirconia/Nafion composite film can reach 95% of steady-state current less than 5 s. In addition, the biosensor responds to glucose linearly in the range of 0.03-15.08 mM with a sensitivity of 3.40 $\mu$A/mM and the detection limit of 0.037 mM (S/N = 3). Moreover, the biosensor exhibited good sensor-to-sensor reproducibility (~5%) and long-term stability (90% of its original activity retained after 4 weeks) when stored in 50 mM phosphate buffer at pH 7 at 4 ${^{\circ}C}$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.108-112
• /
• 1993

The term Alkali-Silica Reaction (ASR) is used to describe a reaction between certain siliceous aggregates and hydroxyl ions present in the pore fluid of a concrete. The ASR is affected by the content of alkali, the particle size and the content of reactive aggregate, water-cement ratio, humidity, temperature and so on. In this paper, the fluence of alkali content and kind of added alkali to the ASR was studied. As a result, the more the content of alkali was increased, the more the mortar-bar was expand and the expansion of mortar-bar was showed differently with the added alkali kinds, The reaction products by ASR were observed by SEM(Scanning Electron Microscope) and analyzed by EDXA(Energy Dispersive X-ray Analysis) also and showed a gel composed of alkali(Na+, K+), silica and calcium.