• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.253-256
• /
• 2002

A programmable CMOS negative resistor has been designed and fabricated in a 0.5um double poly double metal technology. The proposed CMOS negative resistor consists of a positive feedback OTA and a bump circuit with Gaussian-like I-V curve. Measurements of the fabricated chip confirm that the proposed CMOS resistor shows various negative resistance according to control voltage.

• KSTLE International Journal
• /
• 제9권1_2호
• /
• pp.31-35
• /
• 2008

DLC (Diamond Like Carbon) films have predominant tribological properties like a high hardness, low friction and high chemical resistance; therefore, DLC films are applied in a wide range of industrial fields. This paper evaluated the characteristics of DLC films deposited on bearing steel with different hardness by RF-PECVD (Radio Frequency - Plasma Enhanced Chemical Vapor Deposition) method. Si-interlayer was deposited on bearing steel to improve adhesion strength by RF-Sputtering method. The DLC film structures were analyzed with Raman spectra and Gaussian function. Adhesion strength of DLC films was measured with a scratch tester. Friction and wear test were carried out with a ball-on -disc type to investigate the tribological characteristics. Experimental results showed that DLC films deposited on bearing steel under same deposition condition have typical structure DLC films regardless of hardness of bearing steel. Adhesion strength of DLC film is increased with a hardness of bearing steel. Friction coefficient of DLC film showed lower at the high hardness of bearing steel.

• 한국콘텐츠학회논문지
• /
• 제11권4호
• /
• pp.74-82
• /
• 2011

비선형 공정을 퍼지 모델링 하는 것은 전체 입력의 공간 분할 및 퍼지 추론 방법에 따른 퍼지 추론 시스템의 입출력 특성을 분석하는 것이 필요하다. 이를 위해, 퍼지 모델은 입력 변수와 퍼지 입력 공간 분할 및 후반부 다항식 함수에 의한 구조 및 파라미터를 동정함으로서 표현된다. 퍼지 규칙의 전반부에서 입력 데이터의 최소 값과 최대 값을 이용하는 최소-최대 방법 및 입력 데이터를 군집으로 형성하는 C-Means 클러스터링 알고리즘이 퍼지 모델의 동정을 위해 사용되고, 소속 함수는 삼각형, 범종형, 사다리꼴형 소속함수를 사용한다. 퍼지 규칙의 후반부 동정에서 퍼지 추론은 간략 및 선형 추론과 같은 두 가지 형태를 수행한다. 각 규칙의 후반부 파라미터들, 즉 다항식의 계수들의 동정은 표준 최소자승법에 의해 수행된다. 마지막으로, 비선형 공정으로는 널리 이용되는 가스로 데이터를 이용하여 시스템 특성 및 성능을 평가한다.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.8-14
• /
• 2006

본 논문에서는 노이즈에 둔감한 4*4 밴드패스 이산 코사인 (MF-DCT) 초점 값 연산자를 제안하였다. 제안된 연산자는 DCT 결과 중 중간 주파수 성분을 사용하는 8*8 MDCT 연산자를 노이즈에 둔감하도록 4 형태로 개선한 것으로써 연산자를 180도 회전하여도 같은 구조를 같도록 하였다. 이 연산자는 샘플링 주파수의 절반 부분지 주파수를 통과시키는 밴드패스 필터와 같이 동작하여 초점 정보를 가지고 있지 않는 저주파 신호와 노이즈에 의해 많은 영향을 받는 고주파 신호를 억제함으로써 노이즈에 둔감한 특성을 가진다. 또한 밴드패스 필터를 통과한 성분의 에너지를 초점 값으로 사용함으로써 초점 합의 선형성을 보장받게 된다. 실험 결과에서는 MF-DCT 연산자의 가우시안 노이즈 및 임펄시브 노이즈 특성을 살펴보기 위해 기존의 초점 값 연산자들과의 Autofocusing Uncertain Measure (AUM)비교를 통해 우수성을 검증하였다.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.635-644
• /
• 1994

This study investigated mainly on the flow characteristics of a droplet in the cross region of twin spray. The velocities of the droplet were measured along the axial and radial direction, and the flow characteristics of the droplet were statistically analyzed. For the statistical analysis, the probability density of the turbulent components has been studied, and then the Reynolds shear stress, the skewness and the flatness factors were calculated, and compared with the Gaussian value. Two pressure swirl stomizers were used for the twin spray system and kerosene was employed as the working liquid. 2-D PDA(particle dynamic analyzer) was used for the purpose of the measurement of droplet size and velocities. As a result, it was found that (1) the droplets collision was taken place strongly in the cross region. So, a large momentum loss of droplets due to the loss of natural movement direction was occurred, and momentum loss of radial direction was greater than that of axial direction. (2) The axial direction skewness factor approached to zero like the Gaussian distribution in the cross region of twin spray. (3) In the cross region of twin spray, the fluctuation instability of droplet was increased because of the development of the turbulence characteristics due to the droplet collision.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 춘계학술대회 학술발표 논문집 제16권 제1호
• /
• pp.245-248
• /
• 2006

A particle filter is one of the most famous filters. The reason why the particle filter is widely used is that particle deals with the state estimation problem for not only linear models with Gaussian noise but also the non-linear models with non-Gaussian noise and it receives great attention from many engineering fields. In the point of view state estimator, particle filter is feedforward observer. According to the characteristic of dynamic system, the feedforward observer can estimate real state. However, the speed of convergence of feedforward observer between the actual state and the estimated state cannot be satisfied. Since the particle filter is a sort of feedforward observer, the convergence speed of particle filter is slow, and the particle filter cannot estimate actual state like particle collapse problem. In order to overcome the limitation of particle filter as a kind of feedfoward estimator, we propose a new particle filter which has feedback term, called particle filter with feedback. Our proposed method is analyzed theoretically and studied by computer simulation. Comparisons are made with other filtering mehod.

• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1518-1523
• /
• 2012

영상매체가 여러 방면에서 발전함에 따라 영상처리의 중요성이 높아지고 있다. 영상처리 분야 중 에지검출은 물체 인식, 물체 분할, 의료 및 산업 전반적인 분야 등에서 많이 활용되고 있다. 에지는 영상에서 중요한 요소인 크기, 방향, 위치 등의 정보를 포함하고 있다. 에지를 검출하기 위한 기존의 방법에는 Sobel, Prewitt, Roberts, Laplacian 등의 방법이 있으며, 기존의 방법들은 AWGN(Additive White Gaussian Noise)에 훼손된 영상에서 에지검출 특성이 저하된다. 따라서 본 연구는 AWGN에 훼손된 영상에서 우수한 에지검출 특성을 갖는 변형된 가중치 벡터를 이용한 알고리즘을 제안하였다.

• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.78-84
• /
• 2007

Laser Material Processing has been replaced the conventional machining systems - cutting, drilling, welding and surface modification and so on. Especially, LTH(Laser Transformation Hardening) process is one branch of the laser surface modification process. Conventionally, some techniques like a gas carburizing and nitriding as well as induction and torch heating have been used to harden the carbon steels. But these methods not only request post-machining resulted from a deformation but also have complex processing procedures. Besides, LTH process has some merits as : 1. It is easy to control the case depth because of output(laser power) adjustability. 2. It is able to harden the localized and complicated a.ea and minimize a deformation due to a unique property of a localized heat source. 3. An additional cooling medium is not required due to self quenching. 4. A prominent hardening results can be obtained. This study is related to the surface hardening of the rod-shaped carbon steel applied to the lathe based complex processing mechanism, a basic behavior of surface hardening, hardness distribution and structural characteristics in the hardened zone.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.40-50
• /
• 2011

A two-dimensional (2D) analytical model for the potential distribution and threshold voltage of short-channel ion-implanted GaAs MESFETs operating in the sub-threshold regime has been presented. A double-integrable Gaussian-like function has been assumed as the doping distribution profile in the vertical direction of the channel. The Schottky gate has been assumed to be semi-transparent through which optical radiation is coupled into the device. The 2D potential distribution in the channel of the short-channel device has been obtained by solving the 2D Poisson's equation by using suitable boundary conditions. The effects of excess carrier generation due to the incident optical radiation in channel region have been included in the Poisson's equation to study the optical effects on the device. The potential function has been utilized to model the threshold voltage of the device under dark and illuminated conditions. The proposed model has been verified by comparing the theoretically predicted results with simulated data obtained by using the commercially available $ATLAS^{TM}$ 2D device simulator.

• Communications for Statistical Applications and Methods
• /
• 제28권1호
• /
• pp.59-79
• /
• 2021

Value at Risk (VaR) is one of the most common risk management tools in finance. Since a portfolio of several assets, rather than one asset portfolio, is advantageous in the risk diversification for investment, VaR for a portfolio of two or more assets is often used. In such cases, multivariate distributions of asset returns are considered to calculate VaR of the corresponding portfolio. Copulas are one way of generating a multivariate distribution by identifying the dependence structure of asset returns while allowing many different marginal distributions. However, they are used mainly for bivariate distributions and are not widely used in modeling joint distributions for many variables in finance. In this study, we would like to examine the performance of various copulas for high dimensional data and several different dependence structures. This paper compares copulas such as elliptical, vine, and hierarchical copulas in computing the VaR of portfolios to find appropriate copula functions in various dependence structures among asset return distributions. In the simulation studies under various dependence structures and real data analysis, the hierarchical Clayton copula shows the best performance in the VaR calculation using four assets. For marginal distributions of single asset returns, normal inverse Gaussian distribution was used to model asset return distributions, which are generally high-peaked and heavy-tailed.